power: supply: bq25980: Add support for the BQ259xx family

Add support for the BQ25980, BQ25975 and BQ25960 family of flash
chargers.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

power: supply: bq25980: Add support for the BQ259xx family

Add support for the BQ25980, BQ25975 and BQ25960 family of flash
chargers.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: max17040: Support compatible devices

The max17040 fuel gauge is part of a family of 8 chips that have very
similar mode of operations and registers.

This change a

power: supply: max17040: Support compatible devices

The max17040 fuel gauge is part of a family of 8 chips that have very
similar mode of operations and registers.

This change adds:
- compatible strings for all supported devices and handling for the
minor differences between them;
- handling for devices reporting double capacity via maxim,double-soc;

The datasheets of the supported devices are linked [0] [1] [2] [3].

[0] https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf
[1] https://datasheets.maximintegrated.com/en/ds/MAX17043-MAX17044.pdf
[2] https://datasheets.maximintegrated.com/en/ds/MAX17048-MAX17049.pdf
[3] https://datasheets.maximintegrated.com/en/ds/MAX17058-MAX17059.pdf

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: max17040: Use regmap i2c

Rewrite i2c operations from i2c client read/write to regmap i2c. As
a result, most private functions now accept the private driver data
instea

power: supply: max17040: Use regmap i2c

Rewrite i2c operations from i2c client read/write to regmap i2c. As
a result, most private functions now accept the private driver data
instead of an i2c client pointer.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Add support for RN5T618/RC5T619 charger and fuel gauge

Both chips have charger and a fuel gauge.

This adds basic support for displaying the state of the battery and t

power: supply: Add support for RN5T618/RC5T619 charger and fuel gauge

Both chips have charger and a fuel gauge.

This adds basic support for displaying the state of the battery and the
input power, settings are not modified. There are some defaults set via
OTP.

Charging also starts after plugging USB.

Known issues of the fuel gauge: There are drivers in the wild which disable
the fuel gauge at shutdown. If a kernel is booted without fuel gauge
support, after such a driver has been used, the fuel gauge will stay off
and decalibrate.
If this driver is used after that, it might display wrong values for charge
level.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: smb347-charger: Support SMB345 and SMB358

SMB345 tested on Nexus 7 2013.

Based on:
- https://patchwork.kernel.org/patch/4922431/
- https://patchwork.ozlabs.or

power: supply: smb347-charger: Support SMB345 and SMB358

SMB345 tested on Nexus 7 2013.

Based on:
- https://patchwork.kernel.org/patch/4922431/
- https://patchwork.ozlabs.org/patch/666877/

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Add dependency to lego-ev3-battery Kconfig options

This battery appears only to be used by a single board (DA850), so it
makes sense to add this to the Kconfig file so tha

power: supply: Add dependency to lego-ev3-battery Kconfig options

This battery appears only to be used by a single board (DA850), so it
makes sense to add this to the Kconfig file so that users don't build
the module unnecessarily. It currently seems to be built for the x86
Arch Linux kernel where it's probably not doing much good.

Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: bq25150 introduce the bq25150

Introduce the bq2515x family of chargers.

The BQ2515X family of devices are highly integrated battery management
ICs that integrate

power: supply: bq25150 introduce the bq25150

Introduce the bq2515x family of chargers.

The BQ2515X family of devices are highly integrated battery management
ICs that integrate the most common functions for wearable devices
namely a charger, an output voltage rail, ADC for battery and system
monitoring, and a push-button controller.

Datasheets:
bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf
bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf

Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-next

This merges the MP2629 battery charge management immutable branch
between MFD, IIO and power-supply due for the v5.8 merge window

Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-next

This merges the MP2629 battery charge management immutable branch
between MFD, IIO and power-supply due for the v5.8 merge window
into power-supply for-next branch.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Add support for mps mp2629 battery charger

The mp2629 provides switching-mode battery charge management for
single-cell Li-ion or Li-polymer battery. Driver supports the

power: supply: Add support for mps mp2629 battery charger

The mp2629 provides switching-mode battery charge management for
single-cell Li-ion or Li-polymer battery. Driver supports the
access/control input source and battery charging parameters.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

show more ...

power: supply: KConfig cleanup default n

The "default n" is not needed as it is, well, default. Clean
the KConfig by removing "default n".

Signed-off-by: Matti Vaittinen <matti.

power: supply: KConfig cleanup default n

The "default n" is not needed as it is, well, default. Clean
the KConfig by removing "default n".

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Fix Kconfig help text indentiation

Indent the help text as explained in
Documentation/process/coding-style.rst

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.

power: supply: Fix Kconfig help text indentiation

Indent the help text as explained in
Documentation/process/coding-style.rst

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: Support ROHM bd99954 charger

The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
secondary battery intended to be used in space-constraint equipment such

power: supply: Support ROHM bd99954 charger

The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
secondary battery intended to be used in space-constraint equipment such
as Low profile Notebook PC, Tablets and other applications. BD99954
provides a Dual-source Battery Charger, two port BC1.2 detection and a
Battery Monitor.

Support ROHM BD99954 Charger IC.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: bd70528: use linear ranges

Change the bd70528 to use common linear_range code instead of
implementing a copy of it in this driver.

Signed-off-by: Matti Vaittinen

power: supply: bd70528: use linear ranges

Change the bd70528 to use common linear_range code instead of
implementing a copy of it in this driver.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: add CellWise cw2015 fuel gauge driver

This patch adds a driver for the CellWise cw2015 fuel gauge.

The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge u

power: supply: add CellWise cw2015 fuel gauge driver

This patch adds a driver for the CellWise cw2015 fuel gauge.

The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge used
in the pine64 Pinebook Pro laptop and some Raspberry Pi UPS HATs.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select

regmap is a library function that gets selected by drivers that need
it. No driver modules should depend on it.

power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select

regmap is a library function that gets selected by drivers that need
it. No driver modules should depend on it. Depending on REGMAP_I2C makes
this driver only build if another driver already selected REGMAP_I2C,
as the symbol can't be selected through the menu kernel configuration.

Fixes: 2219a935963e ("power_supply: Add TI BQ24257 charger driver")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

Merge tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

cros-usbpd-notify a

Merge tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

cros-usbpd-notify and cros_ec_typec:
- Add a new notification driver that handles and dispatches USB PD
related events to other drivers.
- Add a Type C connector class driver for cros_ec

CrOS EC:
- Introduce a new cros_ec_cmd_xfer_status helper

Sensors/iio:
- A series from Gwendal that adds Cros EC sensor hub FIFO support

Wilco EC:
- Fix a build warning.
- Platform data shouldn't include kernel.h

Misc:
- i2c api conversion complete, with i2c_new_client_device instead of
i2c_new_device in chromeos_laptop.
- Replace zero-length array with flexible-array member in
cros_ec_chardev and wilco_ec
- Update new structure for SPI transfer delays in cros_ec_spi

* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
iio: cros_ec: Use Hertz as unit for sampling frequency
iio: cros_ec: Report hwfifo_watermark_max
iio: cros_ec: Expose hwfifo_timeout
iio: cros_ec: Remove pm function
iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
iio: expose iio_device_set_clock
iio: cros_ec: Move function description to .c file
platform/chrome: cros_ec_sensorhub: Add median filter
platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
platform/chrome: cros_ec_sensorhub: Add FIFO support
platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
platform/chrome: chromeos_laptop: make I2C API conversion complete
platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_typec: Update port info from EC
platform/chrome: Add Type C connector class driver
platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
platform/chrome: cros_usbpd_notify: Add driver data struct
...

show more ...

power: supply: Allow charger manager can be built as a module

Allow charger manager can be built as a module like other charger
drivers.

Signed-off-by: Baolin Wang <baolin.wang7

power: supply: Allow charger manager can be built as a module

Allow charger manager can be built as a module like other charger
drivers.

Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: cros-ec-usbpd-charger: Fix host events

There's a bug on ACPI platforms where host events from the ECPD ACPI
device never make their way to the cros-ec-usbpd-charger driver

power: supply: cros-ec-usbpd-charger: Fix host events

There's a bug on ACPI platforms where host events from the ECPD ACPI
device never make their way to the cros-ec-usbpd-charger driver. This
makes it so the only time the charger driver updates its state is when
user space accesses its sysfs attributes.

Now that these events have been unified into a single notifier chain on
both ACPI and non-ACPI platforms, update the charger driver to use this
new notifier.

Reviewed-by: Benson Leung <bleung@chromium.org>
Co-Developed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>

show more ...

power: supply: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kcon

power: supply: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

power: supply: ab8500_btemp: Convert to IIO ADC

This switches the AB8500 battery temperature driver to using
the standard IIO ADC channel lookup and conversion routines.

Acked-b

power: supply: ab8500_btemp: Convert to IIO ADC

This switches the AB8500 battery temperature driver to using
the standard IIO ADC channel lookup and conversion routines.

Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
"Main MIPS changes:

- boot_mem_map is removed, providing

Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
"Main MIPS changes:

- boot_mem_map is removed, providing a nice cleanup made possible by
the recent removal of bootmem.

- Some fixes to atomics, in general providing compiler barriers for
smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
or MIPS32 systems using cmpxchg64().

- Conversion to the new generic VDSO infrastructure courtesy of
Vincenzo Frascino.

- Removal of undefined behavior in set_io_port_base(), fixing the
behavior of some MIPS kernel configurations when built with recent
clang versions.

- Initial MIPS32 huge page support, functional on at least Ingenic
SoCs.

- pte_special() is now supported for some configurations, allowing
among other things generic fast GUP to be used.

- Miscellaneous fixes & cleanups.

And platform specific changes:

- Major improvements to Ingenic SoC support from Paul Cercueil,
mostly enabled by the inclusion of the new TCU (timer-counter unit)
drivers he's spent a very patient year or so working on. Plus some
fixes for X1000 SoCs from Zhou Yanjie.

- Netgear R6200 v1 systems are now supported by the bcm47xx platform.

- DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"

* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
MIPS: Detect bad _PFN_SHIFT values
MIPS: Disable pte_special() for MIPS32 with RiXi
MIPS: ralink: deactivate PCI support for SOC_MT7621
mips: compat: vdso: Use legacy syscalls as fallback
MIPS: Drop Loongson _CACHE_* definitions
MIPS: tlbex: Remove cpu_has_local_ebase
MIPS: tlbex: Simplify r3k check
MIPS: Select R3k-style TLB in Kconfig
MIPS: PCI: refactor ioc3 special handling
mips: remove ioremap_cachable
mips/atomic: Fix smp_mb__{before,after}_atomic()
mips/atomic: Fix loongson_llsc_mb() wreckage
mips/atomic: Fix cmpxchg64 barriers
MIPS: Octeon: remove duplicated include from dma-octeon.c
firmware: bcm47xx_nvram: Allow COMPILE_TEST
firmware: bcm47xx_nvram: Correct size_t printf format
MIPS: Treat Loongson Extensions as ASEs
MIPS: Remove dev_err() usage after platform_get_irq()
MIPS: dts: mscc: describe the PTP ready interrupt
MIPS: dts: mscc: describe the PTP register range
...

show more ...

mfd / platform: cros_ec: Move cros-ec core driver out from MFD

Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the pl

mfd / platform: cros_ec: Move cros-ec core driver out from MFD

Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

show more ...

power/supply: Drop obsolete JZ4740 driver

It has been replaced with the more mature ingenic-battery driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur

power/supply: Drop obsolete JZ4740 driver

It has been replaced with the more mature ingenic-battery driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>

show more ...

Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
"Core:
- add HWMON compat

Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
"Core:
- add HWMON compat layer
- new properties:
- input power limit
- input voltage limit

Drivers:
- qcom-pon: add gen2 support
- new driver for storing reboot move in NVMEM
- new driver for Wilco EC charger configuration
- simplify getting the adapter of a client"

* tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: nvmem-reboot-mode: add CONFIG_OF dependency
power_supply: wilco_ec: Add charging config driver
power: supply: cros: allow to set input voltage and current limit
power: supply: add input power and voltage limit properties
power: supply: fix semicolon.cocci warnings
power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
dt-bindings: power: reset: add document for NVMEM based reboot-mode
reset: qcom-pon: Add support for gen2 pon
dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line
power: supply: Add HWMON compatibility layer
power: supply: sbs-manager: simplify getting the adapter of a client
power: supply: rt9455_charger: simplify getting the adapter of a client
power: supply: rt5033_battery: simplify getting the adapter of a client
power: supply: max17042_battery: simplify getting the adapter of a client
power: supply: max17040_battery: simplify getting the adapter of a client
power: supply: max14656_charger_detector: simplify getting the adapter of a client
power: supply: bq25890_charger: simplify getting the adapter of a client
power: supply: bq24257_charger: simplify getting the adapter of a client
power: supply: bq24190_charger: simplify getting the adapter of a client

show more ...

Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"Core Frameworks:
- Set 'struct device' fwnode when registering

Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"Core Frameworks:
- Set 'struct device' fwnode when registering a new device

New Drivers:
- Add support for ROHM BD70528 PMIC

New Device Support:
- Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
- Add support for RK809 and RK817 to Rockchip RK808
- Add support for Lid Angle to ChromeOS core
- Add support for CS47L15 CODEC to Madera core
- Add support for CS47L92 CODEC to Madera core
- Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
- Add support for Add Intel Elkhart Lake PCH to Intel LPSS

New Functionality:
- Provide regulator supply information when registering; madera-core
- Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
- Allow over-riding power button press via Device Tree; rohm-bd718x7
- Differentiate between running processors; cros_ec_dev

Fix-ups:
- Big header file update; cros_ec_commands.h
- Split header per-subsystem; rohm-bd718x7
- Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
- Trivial; sorting, coding style; intel-lpss-pci
- Only remove Power Off functionality if set locally; rk808
- Make use for Power Off Prepare(); rk808
- Fix spelling mistake in header guards; stmfx
- Properly free IDA resources
- SPDX fixups; cs47lXX-tables, madera
- Error path fixups; hi655x-pmic

Bug Fixes:
- Add missing break in case() statement
- Repair undefined behaviour when not initialising variables; arizona-core, madera-core
- Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
mfd: madera: Fixup SPDX headers
mfd: madera: Remove some unused registers and fix some defaults
mfd: intel-lpss: Release IDA resources
mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
mfd: cs5535-mfd: Remove ifdef OLPC noise
mfd: stmfx: Fix macro definition spelling
dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
mfd: rk808: Prepare rk805 for poweroff
mfd: rk808: Check pm_power_off pointer
mfd: cros_ec: differentiate SCP from EC by feature bit
dt-bindings: Add binding for cros-ec-rpmsg
mfd: madera: Add Madera core support for CS47L92
mfd: madera: Add Madera core support for CS47L15
mfd: madera: Update DT bindings to add additional CODECs
mfd: madera: Add supply mapping for MICVDD
mfd: madera: Fix potential uninitialised use of variable
mfd: madera: Fix bad reference to pinctrl.txt file
...

show more ...