Revision tags: v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26 |
|
#
b82a7b01 |
| 23-Mar-2021 |
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> |
platform/x86: gpd pocket fan: Clean-up by using managed work init
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switc
platform/x86: gpd pocket fan: Clean-up by using managed work init
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead.
This change is compile-tested only. All testing is appreciated.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/aa25a6781ba016772b045cd6e630da8c559a665d.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25 |
|
#
1d6f8c5b |
| 06-Mar-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Fix error message when temp-limits are out of range
Commit 1f27dbd8265d ("platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits") changed the mod
platform/x86: GPD pocket fan: Fix error message when temp-limits are out of range
Commit 1f27dbd8265d ("platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits") changed the module-param sanity check to accept temperature limits between 20 and 90 degrees celcius.
But the error message printed when the module params are outside this range was not updated. This commit updates the error message to match the new min and max value for the temp-limits.
Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pavel Machek <pavel@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
Revision tags: v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9 |
|
#
1f27dbd8 |
| 06-Jan-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70).
Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
6ae01050 |
| 06-Jan-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Use default values when wrong modparams are given
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves th
platform/x86: GPD pocket fan: Use default values when wrong modparams are given
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case.
This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL.
Cc: stable@vger.kernel.org Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
eb518899 |
| 06-Jan-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70).
Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
01e28c1b |
| 06-Jan-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Use default values when wrong modparams are given
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves th
platform/x86: GPD pocket fan: Use default values when wrong modparams are given
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case.
This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL.
Cc: stable@vger.kernel.org Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
Revision tags: v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
b1ca80e4 |
| 09-Feb-2018 |
Colin Ian King <colin.king@canonical.com> |
platform/x86: GPD pocket fan: fix spelling mistake: "Mill-celcius" -> "millicelsius"
Trivial fix to spelling mistake in MODULE_PARM_DESC text and remove unnecessary hyphen.
Signed-off-by: Colin Ian
platform/x86: GPD pocket fan: fix spelling mistake: "Mill-celcius" -> "millicelsius"
Trivial fix to spelling mistake in MODULE_PARM_DESC text and remove unnecessary hyphen.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
Revision tags: v4.15 |
|
#
e5778689 |
| 19-Jan-2018 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Stop work on suspend
Stop the work on suspend, otherwise it may run between our suspend method running and the system suspending, possibly restarting the fan which we'v
platform/x86: GPD pocket fan: Stop work on suspend
Stop the work on suspend, otherwise it may run between our suspend method running and the system suspending, possibly restarting the fan which we've just stopped.
Note we already requeue the work on resume, so that we get a fresh speed at resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
594ce6db |
| 19-Jan-2018 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Use a min-speed of 2 while charging
Newer versions of the GPD pocket BIOS set the fan-speed to 2 when a charger gets plugged in while the device is off. Mirror this in
platform/x86: GPD pocket fan: Use a min-speed of 2 while charging
Newer versions of the GPD pocket BIOS set the fan-speed to 2 when a charger gets plugged in while the device is off. Mirror this in our fan driver and use a minimum speed of 2 while charging,
Cc: James <kernel@madingley.org> Suggested-by: James <kernel@madingley.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
d890acf7 |
| 19-Jan-2018 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Set speed to max on get_temp failure
When we fail to get the temperature, assume the worst and set the speed to max.
While at it introduce a define for MAX_SPEED.
Cc:
platform/x86: GPD pocket fan: Set speed to max on get_temp failure
When we fail to get the temperature, assume the worst and set the speed to max.
While at it introduce a define for MAX_SPEED.
Cc: James <kernel@madingley.org> Suggested-by: James <kernel@madingley.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
1b46f17d |
| 12-Dec-2017 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: Add driver for GPD pocket custom fan controller
Add a driver for the GPD pocket device's custom fan controller, which gets controlled through 2 GPIOs listed in a FAN02501 ACPI device.
platform/x86: Add driver for GPD pocket custom fan controller
Add a driver for the GPD pocket device's custom fan controller, which gets controlled through 2 GPIOs listed in a FAN02501 ACPI device.
Cc: James <kernel@madingley.org> Suggested-by: James <kernel@madingley.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
Revision tags: v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25 |
|
#
1d6f8c5b |
| 06-Mar-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Fix error message when temp-limits are out of range Commit 1f27dbd8265d ("platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits") cha
platform/x86: GPD pocket fan: Fix error message when temp-limits are out of range Commit 1f27dbd8265d ("platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits") changed the module-param sanity check to accept temperature limits between 20 and 90 degrees celcius. But the error message printed when the module params are outside this range was not updated. This commit updates the error message to match the new min and max value for the temp-limits. Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pavel Machek <pavel@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
Revision tags: v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9 |
|
#
1f27dbd8 |
| 06-Jan-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70). Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
6ae01050 |
| 06-Jan-2020 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Use default values when wrong modparams are given Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to lo
platform/x86: GPD pocket fan: Use default values when wrong modparams are given Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case. This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL. Cc: stable@vger.kernel.org Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
Revision tags: v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
b1ca80e4 |
| 09-Feb-2018 |
Colin Ian King <colin.king@canonical.com> |
platform/x86: GPD pocket fan: fix spelling mistake: "Mill-celcius" -> "millicelsius" Trivial fix to spelling mistake in MODULE_PARM_DESC text and remove unnecessary hyphen. Sign
platform/x86: GPD pocket fan: fix spelling mistake: "Mill-celcius" -> "millicelsius" Trivial fix to spelling mistake in MODULE_PARM_DESC text and remove unnecessary hyphen. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
Revision tags: v4.15 |
|
#
e5778689 |
| 19-Jan-2018 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Stop work on suspend Stop the work on suspend, otherwise it may run between our suspend method running and the system suspending, possibly restarting the fa
platform/x86: GPD pocket fan: Stop work on suspend Stop the work on suspend, otherwise it may run between our suspend method running and the system suspending, possibly restarting the fan which we've just stopped. Note we already requeue the work on resume, so that we get a fresh speed at resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
594ce6db |
| 19-Jan-2018 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Use a min-speed of 2 while charging Newer versions of the GPD pocket BIOS set the fan-speed to 2 when a charger gets plugged in while the device is off. Mir
platform/x86: GPD pocket fan: Use a min-speed of 2 while charging Newer versions of the GPD pocket BIOS set the fan-speed to 2 when a charger gets plugged in while the device is off. Mirror this in our fan driver and use a minimum speed of 2 while charging, Cc: James <kernel@madingley.org> Suggested-by: James <kernel@madingley.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
d890acf7 |
| 19-Jan-2018 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: GPD pocket fan: Set speed to max on get_temp failure When we fail to get the temperature, assume the worst and set the speed to max. While at it introduce a define
platform/x86: GPD pocket fan: Set speed to max on get_temp failure When we fail to get the temperature, assume the worst and set the speed to max. While at it introduce a define for MAX_SPEED. Cc: James <kernel@madingley.org> Suggested-by: James <kernel@madingley.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|
#
1b46f17d |
| 12-Dec-2017 |
Hans de Goede <hdegoede@redhat.com> |
platform/x86: Add driver for GPD pocket custom fan controller Add a driver for the GPD pocket device's custom fan controller, which gets controlled through 2 GPIOs listed in a FAN02501 A
platform/x86: Add driver for GPD pocket custom fan controller Add a driver for the GPD pocket device's custom fan controller, which gets controlled through 2 GPIOs listed in a FAN02501 ACPI device. Cc: James <kernel@madingley.org> Suggested-by: James <kernel@madingley.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
show more ...
|