Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30 |
|
#
619f8ca4 |
| 24-May-2023 |
Alexandre Torgue <alexandre.torgue@foss.st.com> |
pinctrl: stm32: add stm32mp257 pinctrl support
Add stm32mp257 pinctrl support.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
Revision tags: v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53 |
|
#
a022135a |
| 23-Jul-2021 |
Alexandre Torgue <alexandre.torgue@foss.st.com> |
pinctrl: stm32: Add STM32MP135 SoC support
STM32MP135 SoC embeds 9 GPIO banks of 16 gpios each. Those GPIO banks contain same features as STM32MP157 GPIO banks except that each GPIO line of the STM3
pinctrl: stm32: Add STM32MP135 SoC support
STM32MP135 SoC embeds 9 GPIO banks of 16 gpios each. Those GPIO banks contain same features as STM32MP157 GPIO banks except that each GPIO line of the STM32MP135 can be secured.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de Link: https://lore.kernel.org/r/20210723132810.25728-3-alexandre.torgue@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4 |
|
#
ec8f24b7 |
| 19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
86822c2f |
| 06-Mar-2018 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency
These configs select MFD_SYSCON, but do not depend on HAS_IOMEM.
Compile testing on architecture without HAS_IOMEM causes "unmet d
pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency
These configs select MFD_SYSCON, but do not depend on HAS_IOMEM.
Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase.
Detected by "make ARCH=score allyesconfig".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.15 |
|
#
f90160fc |
| 11-Dec-2017 |
Alexandre Torgue <alexandre.torgue@st.com> |
pinctrl: stm32: add STM32F769 MCU support
This patch which adds STM32F769 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.
pinctrl: stm32: add STM32F769 MCU support
This patch which adds STM32F769 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Acked-by: Patrice CHOTARD <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
4ef4cc13 |
| 18-Dec-2017 |
Ludovic Barre <ludovic.barre@st.com> |
pinctrl: stm32: Add STM32MP157 MPU support
This driver consists of 2 controllers due to a hole in mapping: -1 controller for GPIO bankA to K. -1 controller for GPIO bankZ.
Signed-off-by: Alexandre
pinctrl: stm32: Add STM32MP157 MPU support
This driver consists of 2 controllers due to a hole in mapping: -1 controller for GPIO bankA to K. -1 controller for GPIO bankZ.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13 |
|
#
8db63f53 |
| 11-Jul-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on
Drivers that need IRQ_DOMAIN_HIERARCHY should "select" it, but drivers/pinctrl/stm32/Kconfig is the only exception that uses "depend
pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on
Drivers that need IRQ_DOMAIN_HIERARCHY should "select" it, but drivers/pinctrl/stm32/Kconfig is the only exception that uses "depends on" syntax. This prevents GPIO drivers from select'ing IRQ_DOMAIN_HIERARCHY.
For example, if I add "select IRQ_DOMAIN_HIERARCHY" to GPIO_XGENE_SB, I get the following recursive dependency error.
drivers/gpio/Kconfig:13:error: recursive dependency detected! For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpio/Kconfig:13: symbol GPIOLIB is selected by PINCTRL_STM32 For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/pinctrl/stm32/Kconfig:3: symbol PINCTRL_STM32 is selected by PINCTRL_STM32F429 For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/pinctrl/stm32/Kconfig:11: symbol PINCTRL_STM32F429 depends on IRQ_DOMAIN_HIERARCHY For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" kernel/irq/Kconfig:67: symbol IRQ_DOMAIN_HIERARCHY is selected by GPIO_XGENE_SB For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpio/Kconfig:502: symbol GPIO_XGENE_SB depends on GPIOLIB
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9 |
|
#
ca028dbb |
| 07-Apr-2017 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: stm32: Add STM32F469 MCU support
This patch which adds STM32F469 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.
pinctrl: stm32: Add STM32F469 MCU support
This patch which adds STM32F469 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
deb30f51 |
| 31-Jan-2017 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: stm32: Add STM32H743 MCU support
This patch adds STM32H743 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> S
pinctrl: stm32: Add STM32H743 MCU support
This patch adds STM32H743 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4 |
|
#
49cf2f29 |
| 14-Sep-2016 |
Arnd Bergmann <arnd@arndb.de> |
pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependency
The newly added irqchip support for the stm32 pinctrl driver uses hierarchical IRQ domains as provided by the NVIC primary irqchip. This works gre
pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependency
The newly added irqchip support for the stm32 pinctrl driver uses hierarchical IRQ domains as provided by the NVIC primary irqchip. This works great for any configuration that may be relevant on stm32, but when doing compile-testing (randconfig), we can enable it without NVIC or any other primary irqchip that enables IRQ_DOMAIN_HIERARCHY:
drivers/pinctrl/stm32/pinctrl-stm32.c:212:13: error: 'irq_chip_eoi_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:213:20: error: 'irq_chip_mask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:214:20: error: 'irq_chip_unmask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:215:20: error: 'irq_chip_set_type_parent' undeclared here (not in a function)
This adds a Kconfig dependency to limit compile-testing to configurations that have IRQ_DOMAIN_HIERARCHY already enabled. It's not obvious whether we should use 'depends on' or 'select' here, I think either one works, with 'depends on' being more intuitive, while 'select' would be less likely to cause dependency loops.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
0eb9f683 |
| 09-Sep-2016 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: Add IRQ support to STM32 gpios
This patch adds IRQ support to STM32 gpios.
The EXTI controller has 16 lines dedicated to GPIOs. EXTI line n can be connected to only line n of one of the GP
pinctrl: Add IRQ support to STM32 gpios
This patch adds IRQ support to STM32 gpios.
The EXTI controller has 16 lines dedicated to GPIOs. EXTI line n can be connected to only line n of one of the GPIO ports, for example EXTI0 can be connected to either PA0, or PB0, or PC0... This port selection is done by specifying the port number into System Config registers.
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4 |
|
#
25af8bfa |
| 11-Jul-2016 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: Add STM32F746 MCU support
This patch which adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> S
pinctrl: Add STM32F746 MCU support
This patch which adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver.
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1 |
|
#
aceb16dc |
| 14-Jan-2016 |
Maxime Coquelin <mcoquelin.stm32@gmail.com> |
pinctrl: Add STM32 MCUs support
This patch adds pinctrl and GPIO support to STMicroelectronic's STM32 family of MCUs.
While it only supports STM32F429 for now, it has been designed to enable suppor
pinctrl: Add STM32 MCUs support
This patch adds pinctrl and GPIO support to STMicroelectronic's STM32 family of MCUs.
While it only supports STM32F429 for now, it has been designed to enable support of other MCUs of the family (e.g. STM32F746).
Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4 |
|
#
ec8f24b7 |
| 19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These file
treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
86822c2f |
| 06-Mar-2018 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency These configs select MFD_SYSCON, but do not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM
pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency These configs select MFD_SYSCON, but do not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.15 |
|
#
f90160fc |
| 11-Dec-2017 |
Alexandre Torgue <alexandre.torgue@st.com> |
pinctrl: stm32: add STM32F769 MCU support This patch which adds STM32F769 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Alexandre Torgue <
pinctrl: stm32: add STM32F769 MCU support This patch which adds STM32F769 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Acked-by: Patrice CHOTARD <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
4ef4cc13 |
| 18-Dec-2017 |
Ludovic Barre <ludovic.barre@st.com> |
pinctrl: stm32: Add STM32MP157 MPU support This driver consists of 2 controllers due to a hole in mapping: -1 controller for GPIO bankA to K. -1 controller for GPIO bankZ. S
pinctrl: stm32: Add STM32MP157 MPU support This driver consists of 2 controllers due to a hole in mapping: -1 controller for GPIO bankA to K. -1 controller for GPIO bankZ. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13 |
|
#
8db63f53 |
| 11-Jul-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on Drivers that need IRQ_DOMAIN_HIERARCHY should "select" it, but drivers/pinctrl/stm32/Kconfig is the only exception that
pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on Drivers that need IRQ_DOMAIN_HIERARCHY should "select" it, but drivers/pinctrl/stm32/Kconfig is the only exception that uses "depends on" syntax. This prevents GPIO drivers from select'ing IRQ_DOMAIN_HIERARCHY. For example, if I add "select IRQ_DOMAIN_HIERARCHY" to GPIO_XGENE_SB, I get the following recursive dependency error. drivers/gpio/Kconfig:13:error: recursive dependency detected! For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpio/Kconfig:13: symbol GPIOLIB is selected by PINCTRL_STM32 For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/pinctrl/stm32/Kconfig:3: symbol PINCTRL_STM32 is selected by PINCTRL_STM32F429 For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/pinctrl/stm32/Kconfig:11: symbol PINCTRL_STM32F429 depends on IRQ_DOMAIN_HIERARCHY For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" kernel/irq/Kconfig:67: symbol IRQ_DOMAIN_HIERARCHY is selected by GPIO_XGENE_SB For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpio/Kconfig:502: symbol GPIO_XGENE_SB depends on GPIOLIB Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9 |
|
#
ca028dbb |
| 07-Apr-2017 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: stm32: Add STM32F469 MCU support This patch which adds STM32F469 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Alexandre TORGUE <
pinctrl: stm32: Add STM32F469 MCU support This patch which adds STM32F469 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
deb30f51 |
| 31-Jan-2017 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: stm32: Add STM32H743 MCU support This patch adds STM32H743 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Alexandre TORGUE <alexan
pinctrl: stm32: Add STM32H743 MCU support This patch adds STM32H743 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4 |
|
#
49cf2f29 |
| 14-Sep-2016 |
Arnd Bergmann <arnd@arndb.de> |
pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependency The newly added irqchip support for the stm32 pinctrl driver uses hierarchical IRQ domains as provided by the NVIC primary irqchip.
pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependency The newly added irqchip support for the stm32 pinctrl driver uses hierarchical IRQ domains as provided by the NVIC primary irqchip. This works great for any configuration that may be relevant on stm32, but when doing compile-testing (randconfig), we can enable it without NVIC or any other primary irqchip that enables IRQ_DOMAIN_HIERARCHY: drivers/pinctrl/stm32/pinctrl-stm32.c:212:13: error: 'irq_chip_eoi_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:213:20: error: 'irq_chip_mask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:214:20: error: 'irq_chip_unmask_parent' undeclared here (not in a function) drivers/pinctrl/stm32/pinctrl-stm32.c:215:20: error: 'irq_chip_set_type_parent' undeclared here (not in a function) This adds a Kconfig dependency to limit compile-testing to configurations that have IRQ_DOMAIN_HIERARCHY already enabled. It's not obvious whether we should use 'depends on' or 'select' here, I think either one works, with 'depends on' being more intuitive, while 'select' would be less likely to cause dependency loops. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
0eb9f683 |
| 09-Sep-2016 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: Add IRQ support to STM32 gpios This patch adds IRQ support to STM32 gpios. The EXTI controller has 16 lines dedicated to GPIOs. EXTI line n can be connected to only lin
pinctrl: Add IRQ support to STM32 gpios This patch adds IRQ support to STM32 gpios. The EXTI controller has 16 lines dedicated to GPIOs. EXTI line n can be connected to only line n of one of the GPIO ports, for example EXTI0 can be connected to either PA0, or PB0, or PC0... This port selection is done by specifying the port number into System Config registers. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4 |
|
#
25af8bfa |
| 11-Jul-2016 |
Alexandre TORGUE <alexandre.torgue@st.com> |
pinctrl: Add STM32F746 MCU support This patch which adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Maxime Coquelin <mcoqueli
pinctrl: Add STM32F746 MCU support This patch which adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1 |
|
#
aceb16dc |
| 14-Jan-2016 |
Maxime Coquelin <mcoquelin.stm32@gmail.com> |
pinctrl: Add STM32 MCUs support This patch adds pinctrl and GPIO support to STMicroelectronic's STM32 family of MCUs. While it only supports STM32F429 for now, it has been desig
pinctrl: Add STM32 MCUs support This patch adds pinctrl and GPIO support to STMicroelectronic's STM32 family of MCUs. While it only supports STM32F429 for now, it has been designed to enable support of other MCUs of the family (e.g. STM32F746). Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|