Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46 |
|
#
407d1a51 |
| 15-Aug-2023 |
Lizhi Hou <lizhi.hou@amd.com> |
PCI: Create device tree node for bridge
The PCI endpoint device such as Xilinx Alveo PCI card maps the register spaces from multiple hardware peripherals to its PCI BAR. Normally, the PCI core disco
PCI: Create device tree node for bridge
The PCI endpoint device such as Xilinx Alveo PCI card maps the register spaces from multiple hardware peripherals to its PCI BAR. Normally, the PCI core discovers devices and BARs using the PCI enumeration process. There is no infrastructure to discover the hardware peripherals that are present in a PCI device, and which can be accessed through the PCI BARs.
Apparently, the device tree framework requires a device tree node for the PCI device. Thus, it can generate the device tree nodes for hardware peripherals underneath. Because PCI is self discoverable bus, there might not be a device tree node created for PCI devices. Furthermore, if the PCI device is hot pluggable, when it is plugged in, the device tree nodes for its parent bridges are required. Add support to generate device tree node for PCI bridges.
Add an of_pci_make_dev_node() interface that can be used to create device tree node for PCI devices.
Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on, the kernel will generate device tree nodes for PCI bridges unconditionally.
Initially, add the basic properties for the dynamically generated device tree nodes which include #address-cells, #size-cells, device_type, compatible, ranges, reg.
Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org>
show more ...
|
Revision tags: v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56 |
|
#
9d24322e |
| 19-Jul-2022 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> |
PCI/DOE: Add DOE mailbox support functions
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based mailbox with standard protocol discovery. Each mailbox is accessed through a DOE Ex
PCI/DOE: Add DOE mailbox support functions
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based mailbox with standard protocol discovery. Each mailbox is accessed through a DOE Extended Capability.
Each DOE mailbox must support the DOE discovery protocol in addition to any number of additional protocols.
Define core PCIe functionality to manage a single PCIe DOE mailbox at a defined config space offset. Functionality includes iterating, creating, query of supported protocol, and task submission. Destruction of the mailboxes is device managed.
Cc: "Li, Ming" <ming4.li@intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-4-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
show more ...
|
Revision tags: v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26 |
|
#
1d38fe6e |
| 24-Feb-2022 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI/VGA: Move vgaarb to drivers/pci
The VGA arbiter is really PCI-specific and doesn't depend on any GPU things. Move it to the PCI subsystem.
Note that misc_init() must be called before vga_arb_d
PCI/VGA: Move vgaarb to drivers/pci
The VGA arbiter is really PCI-specific and doesn't depend on any GPU things. Move it to the PCI subsystem.
Note that misc_init() must be called before vga_arb_device_init(). These are both subsys_initcalls, so this ordering depends on the link order, which is determined by drivers/Makefile:
obj-y += pci/ obj-y += char/ <-- misc_init() obj-y += gpu/ <-- vga_arb_device_init() (before this commit)
The drivers/pci/ subsys_initcalls are called *before* misc_init(), so convert vga_arb_device_init() to subsys_initcall_sync(), which is called after *all* subsys_initcalls.
Link: https://lore.kernel.org/r/20220224224753.297579-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
Revision tags: v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7 |
|
#
288c81ce |
| 06-Dec-2021 |
Thomas Gleixner <tglx@linutronix.de> |
PCI/MSI: Move code into a separate directory
msi.c is getting larger and really could do with a splitup. Move it into its own directory to prepare for that.
Signed-off-by: Thomas Gleixner <tglx@lin
PCI/MSI: Move code into a separate directory
msi.c is getting larger and really could do with a splitup. Move it into its own directory to prepare for that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20211206210224.655043033@linutronix.de
show more ...
|
Revision tags: v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
e8e9aaba |
| 04-Feb-2021 |
Junhao He <hejunhao2@hisilicon.com> |
PCI: Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy
CONFIG_PCI_DEBUG=y adds -DDEBUG to CFLAGS, which enables things like pr_debug() and dev_dbg() (and hence pci_dbg()). Previously we added
PCI: Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy
CONFIG_PCI_DEBUG=y adds -DDEBUG to CFLAGS, which enables things like pr_debug() and dev_dbg() (and hence pci_dbg()). Previously we added -DDEBUG for files in drivers/pci/, but not files in subdirectories of drivers/pci/.
Add -DDEBUG to CFLAGS for all files below drivers/pci/ so CONFIG_PCI_DEBUG applies to the entire hierarchy.
[bhelgaas: commit log] Link: https://lore.kernel.org/r/1612438215-33105-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Junhao He <hejunhao2@hisilicon.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
show more ...
|
Revision tags: v5.10 |
|
#
cbc40d5c |
| 03-Dec-2020 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI/MSI: Move MSI/MSI-X init to msi.c
Move pci_msi_setup_pci_dev(), which disables MSI and MSI-X interrupts, from probe.c to msi.c so it's with all the other MSI code and more consistent with other
PCI/MSI: Move MSI/MSI-X init to msi.c
Move pci_msi_setup_pci_dev(), which disables MSI and MSI-X interrupts, from probe.c to msi.c so it's with all the other MSI code and more consistent with other capability initialization. This means we must compile msi.c always, even without CONFIG_PCI_MSI, so wrap the rest of msi.c in an #ifdef and adjust the Makefile accordingly. No functional change intended.
Link: https://lore.kernel.org/r/20201203185110.1583077-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10 |
|
#
b7da3d4d |
| 06-Nov-2019 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI: Allow building PCIe things without PCIEPORTBUS
Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is no
PCI: Allow building PCIe things without PCIEPORTBUS
Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is not selected. Remove the PCIEPORTBUS guard from building pcie/.
Link: https://lore.kernel.org/r/20191106222420.10216-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
show more ...
|
Revision tags: v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5 |
|
#
40e5d614 |
| 25-Mar-2019 |
Kishon Vijay Abraham I <kishon@ti.com> |
PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
of_pci_get_max_link_speed() is built only if CONFIG_PCI is enabled. Make of_pci_get_max_link_speed() to be also used by
PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
of_pci_get_max_link_speed() is built only if CONFIG_PCI is enabled. Make of_pci_get_max_link_speed() to be also used by PCI Endpoint controllers with just CONFIG_PCI_ENDPOINT enabled.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
Revision tags: v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12 |
|
#
5d32a665 |
| 19-Dec-2018 |
Sinan Kaya <okaya@kernel.org> |
PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
We are compiling PCI code today for systems with ACPI and no PCI device present. Remove the useless code and reduce the tight dependency.
Sig
PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
We are compiling PCI code today for systems with ACPI and no PCI device present. Remove the useless code and reduce the tight dependency.
Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
show more ...
|
Revision tags: v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16 |
|
#
23a5fba4 |
| 18-Oct-2018 |
Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
PCI: Introduce PCI bridge emulated config space common logic
Some PCI host controllers do not expose a configuration space for the root port PCI bridge. Due to this, the Marvell Armada 370/38x/XP PC
PCI: Introduce PCI bridge emulated config space common logic
Some PCI host controllers do not expose a configuration space for the root port PCI bridge. Due to this, the Marvell Armada 370/38x/XP PCI controller driver (pci-mvebu) emulates a root port PCI bridge configuration space, and uses that to (among other things) dynamically create the memory windows that correspond to the PCI MEM and I/O regions.
Since we now need to add a very similar logic for the Marvell Armada 37xx PCI controller driver (pci-aardvark), instead of duplicating the code, we create in this commit a common logic called pci-bridge-emul.
The idea of this logic is to emulate a root port PCI bridge configuration space by providing configuration space read/write operations, and faking behind the scenes the configuration space of a PCI bridge. A PCI host controller driver simply has to call pci_bridge_emul_conf_read() and pci_bridge_emul_conf_write() to read/write the configuration space of the bridge.
By default, the PCI bridge configuration space is simply emulated by a chunk of memory, but the PCI host controller can override the behavior of the read and write operations on a per-register basis to do additional actions if needed. We take care of complying with the behavior of the PCI configuration space registers in terms of bits that are read-write, read-only, reserved and write-1-to-clear.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
show more ...
|
Revision tags: v4.18.15, v4.18.14, v4.18.13 |
|
#
52916982 |
| 04-Oct-2018 |
Logan Gunthorpe <logang@deltatee.com> |
PCI/P2PDMA: Support peer-to-peer memory
Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be r
PCI/P2PDMA: Support peer-to-peer memory
Some PCI devices may have memory mapped in a BAR space that's intended for use in peer-to-peer transactions. To enable such transactions the memory must be registered with ZONE_DEVICE pages so it can be used by DMA interfaces in existing drivers.
Add an interface for other subsystems to find and allocate chunks of P2P memory as necessary to facilitate transfers between two PCI peers:
struct pci_dev *pci_p2pmem_find[_many](); int pci_p2pdma_distance[_many](); void *pci_alloc_p2pmem();
The new interface requires a driver to collect a list of client devices involved in the transaction then call pci_p2pmem_find() to obtain any suitable P2P memory. Alternatively, if the caller knows a device which provides P2P memory, they can use pci_p2pdma_distance() to determine if it is usable. With a suitable p2pmem device, memory can then be allocated with pci_alloc_p2pmem() for use in DMA transactions.
Depending on hardware, using peer-to-peer memory may reduce the bandwidth of the transfer but can significantly reduce pressure on system memory. This may be desirable in many cases: for example a system could be designed with a small CPU connected to a PCIe switch by a small number of lanes which would maximize the number of lanes available to connect to NVMe devices.
The code is designed to only utilize the p2pmem device if all the devices involved in a transfer are behind the same PCI bridge. This is because we have no way of knowing whether peer-to-peer routing between PCIe Root Ports is supported (PCIe r4.0, sec 1.3.1). Additionally, the benefits of P2P transfers that go through the RC is limited to only reducing DRAM usage and, in some cases, coding convenience. The PCI-SIG may be exploring adding a new capability bit to advertise whether this is possible for future hardware.
This commit includes significant rework and feedback from Christoph Hellwig.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: fold in fix from Keith Busch <keith.busch@intel.com>: https://lore.kernel.org/linux-pci/20181012155920.15418-1-keith.busch@intel.com, to address comment from Dan Carpenter <dan.carpenter@oracle.com>, fold in https://lore.kernel.org/linux-pci/20181017160510.17926-1-logang@deltatee.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
Revision tags: v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3 |
|
#
68bb22e9 |
| 22-Jun-2018 |
Alan Douglas <adouglas@cadence.com> |
PCI: Initialize endpoint library before controllers
The endpoint library must be initialized before its users, which are in drivers/pci/controllers. The endpoint initialization currently depends on
PCI: Initialize endpoint library before controllers
The endpoint library must be initialized before its users, which are in drivers/pci/controllers. The endpoint initialization currently depends on link order.
This corrects a kernel crash when loading the Cadence EP driver, since it calls devm_pci_epc_create() and this is only valid once the endpoint library has been initialized.
Fixes: 6e0832fa432e ("PCI: Collect all native drivers under drivers/pci/controller/") Signed-off-by: Alan Douglas <adouglas@cadence.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
Revision tags: v4.17.2, v4.17.1, v4.17 |
|
#
6e0832fa |
| 30-May-2018 |
Shawn Lin <shawn.lin@rock-chips.com> |
PCI: Collect all native drivers under drivers/pci/controller/
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in end
PCI: Collect all native drivers under drivers/pci/controller/
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.
These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there.
No functional change intended.
Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
#
a8ccf8a6 |
| 24-Apr-2018 |
Alexander Duyck <alexander.h.duyck@intel.com> |
PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs
Some SR-IOV PF devices provide no functionality other than acting as a means of enabling VFs. For these devices, we want to enable the V
PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs
Some SR-IOV PF devices provide no functionality other than acting as a means of enabling VFs. For these devices, we want to enable the VFs and assign them to guest virtual machines, but there's no need to have a driver for the PF itself.
Add a new pci-pf-stub driver to claim those PF devices and provide the generic VF enable functionality. An administrator can use the sysfs "sriov_numvfs" file to enable VFs, then assign them to guests.
For now I only have one example ID provided by Amazon in terms of devices that require this functionality. The general idea is that in the future we will see other devices added as vendors come up with devices where the PF is more or less just a lightweight shim used to allocate VFs.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
show more ...
|
Revision tags: v4.16 |
|
#
3133e6dd |
| 09-Mar-2018 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI: Tidy Makefiles
Indent things so they line up neatly and remove extra blank lines and superfluous comments. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
37dddf14 |
| 30-Jan-2018 |
Cyrille Pitchen <cyrille.pitchen@free-electrons.com> |
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
This patch adds support to the Cadence PCIe controller in endpoint mode.
Since pieces of source code are shared with the hos
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
This patch adds support to the Cadence PCIe controller in endpoint mode.
Since pieces of source code are shared with the host driver (Root Complex mode), we create a new directory under drivers/pci dedicated to the Cadence PCIe controller. The common code is placed into drivers/pci/cadence/pcie-cadence.c and used by both the host and endpoint controller drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
show more ...
|
#
9de0eec2 |
| 30-Jan-2018 |
Cyrille Pitchen <cyrille.pitchen@free-electrons.com> |
PCI: Regroup all PCI related entries into drivers/pci/Makefile
Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries from drivers/Makefile into drivers/pci/Makefile.
Since we don
PCI: Regroup all PCI related entries into drivers/pci/Makefile
Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries from drivers/Makefile into drivers/pci/Makefile.
Since we don't want to introduce any dependency between CONFIG_PCI and CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile.
Hence all Makefiles in drivers/pci/ were updated accordingly so no file is compiled when CONFIG_PCI is not defined.
Also, we add a comment to reinforce that EPC and EPF libraries must be initialized before their users. Hence built-in EPC drivers, such as those of Designware, are linked after the endpoint core libraries.
Finally, we add another comment to explain why obj-y has been chosen instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
show more ...
|
Revision tags: v4.15, v4.13.16 |
|
#
fd2fa6c1 |
| 22-Nov-2017 |
Bjorn Helgaas <bhelgaas@google.com> |
x86/PCI: Remove unused HyperTransport interrupt support
There are no in-tree callers of ht_create_irq(), the driver interface for HyperTransport interrupts, left. Remove the unused entry point and
x86/PCI: Remove unused HyperTransport interrupt support
There are no in-tree callers of ht_create_irq(), the driver interface for HyperTransport interrupts, left. Remove the unused entry point and all the supporting code.
See 8b955b0dddb3 ("[PATCH] Initial generic hypertransport interrupt support").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-pci@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: https://lkml.kernel.org/r/20171122221337.3877.23362.stgit@bhelgaas-glaptop.roam.corp.google.com
show more ...
|
Revision tags: v4.14 |
|
#
95e3ba97 |
| 13-Oct-2017 |
Mika Westerberg <mika.westerberg@linux.intel.com> |
PCI: Move pci_hp_add_bridge() to drivers/pci/probe.c
There is not much point of having a file with a single function in it. Instead we can just move pci_hp_add_bridge() to drivers/pci/probe.c and ma
PCI: Move pci_hp_add_bridge() to drivers/pci/probe.c
There is not much point of having a file with a single function in it. Instead we can just move pci_hp_add_bridge() to drivers/pci/probe.c and make it available always when PCI core is enabled.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: convert printk to dev_err()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
#
b2441318 |
| 01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license identifiers to apply.
- when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary:
SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became the concluded license(s).
- when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.
In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.13.5, v4.13, v4.12 |
|
#
be0ce12e |
| 28-Jun-2017 |
Matthew Minter <matt@masarand.com> |
PCI: Build setup-irq.o on all arches
The functions included in setup-irq.o currently apply only to a selection of architectures which share common IRQ assignment code. However this code needs to be
PCI: Build setup-irq.o on all arches
The functions included in setup-irq.o currently apply only to a selection of architectures which share common IRQ assignment code. However this code needs to be generalised for all arches to allow deferred IRQ assignment. So the first step is to build it on all architectures.
Signed-off-by: Matthew Minter <matt@masarand.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11 |
|
#
f7195824 |
| 12-Apr-2017 |
David Woodhouse <dwmw@amazon.co.uk> |
PCI: Add pci_mmap_resource_range() and use it for ARM64
Starting to leave behind the legacy of the pci_mmap_page_range() interface which takes "user-visible" BAR addresses. This takes just the reso
PCI: Add pci_mmap_resource_range() and use it for ARM64
Starting to leave behind the legacy of the pci_mmap_page_range() interface which takes "user-visible" BAR addresses. This takes just the resource and offset.
For now, both APIs coexist and depending on the platform, one is implemented as a wrapper around the other.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
Revision tags: v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2 |
|
#
080b47de |
| 06-Mar-2017 |
Logan Gunthorpe <logang@deltatee.com> |
MicroSemi Switchtec management interface driver
Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec d
MicroSemi Switchtec management interface driver
Microsemi's "Switchtec" line of PCI switch devices is already well supported by the kernel with standard PCI switch drivers. However, the Switchtec device advertises a special management endpoint with a separate PCI function address and class code. This endpoint enables some additional functionality which includes:
* Packet and Byte Counters * Switch Firmware Upgrades * Event and Error logs * Querying port link status * Custom user firmware commands
Add a switchtec kernel module which provides PCI driver that exposes a char device. The char device provides userspace access to this interface through read, write and (optionally) poll calls.
A userspace tool and library which utilizes this interface is available at [1]. This tool takes inspiration (and borrows some code) from nvme-cli [2]. The tool is largely complete at this time but additional features may be added in the future.
[1] https://github.com/sbates130272/switchtec-user [2] https://github.com/linux-nvme/nvme-cli
[Dan Carpenter <dan.carpenter@oracle.com>: don't invert error codes] [Christophe JAILLET <christophe.jaillet@wanadoo.fr>: fix switchtec_dev_open() error handling] Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <stephen.bates@microsemi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Zhang <wzhang@fb.com> Reviewed-by: Jens Axboe <axboe@fb.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.10.1, v4.10 |
|
#
7a2b3f02 |
| 15-Feb-2017 |
Kishon Vijay Abraham I <kishon@ti.com> |
PCI: dwc: Remove dependency of designware on CONFIG_PCI
CONFIG_PCI is used to enable host mode PCI. In preparation for adding endpoint mode support to designware driver, remove the dependency of des
PCI: dwc: Remove dependency of designware on CONFIG_PCI
CONFIG_PCI is used to enable host mode PCI. In preparation for adding endpoint mode support to designware driver, remove the dependency of designware on CONFIG_PCI and make only the host-specific part depend on CONFIG_PCI.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
show more ...
|
#
950bf638 |
| 06-Jan-2017 |
Kishon Vijay Abraham I <kishon@ti.com> |
PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
Group all the PCI drivers that use DesignWare core in dwc directory. dwc IP is capable of operating in both host mode and device mod
PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
Group all the PCI drivers that use DesignWare core in dwc directory. dwc IP is capable of operating in both host mode and device mode and keeping it inside the *host* directory is misleading.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Minghuan Lian <minghuan.Lian@freescale.com> Cc: Mingkai Hu <mingkai.hu@freescale.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
show more ...
|