History log of /openbmc/linux/drivers/nubus/nubus.c (Results 1 – 25 of 62)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29
# 72b44f65 15-May-2023 Finn Thain <fthain@linux-m68k.org>

nubus: Don't list slot resources by default

Some Nubus card ROMs contain many slot resources. A single Radius video
card produced well over a thousand entries under /proc/bus/nubus/.
Populating /pro

nubus: Don't list slot resources by default

Some Nubus card ROMs contain many slot resources. A single Radius video
card produced well over a thousand entries under /proc/bus/nubus/.
Populating /proc/bus/nubus/ on a slow machine with several such cards
installed takes long enough that the user may think that the system is
wedged. All those procfs entries also consume significant RAM though
they are not normally needed (except by developers).
Omit these resources from /proc/bus/nubus/ by default and add a kernel
parameter to enable them when needed.
On the test machine, this saved 300 kB and 10 seconds.

Cc: Brad Boyer <flar@allandria.com>
Reviewed-by: Brad Boyer <flar@allandria.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/71ed7fb234a5f7381a50253b0d841a656d53e64c.1684200125.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


Revision tags: v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13
# 51b67a6e 27-Aug-2017 Himanshu Jha <himanshujha199640@gmail.com>

nubus: Remove cast to void pointer

Casting void pointers to other pointer types is unnecessary.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Link: https://lore.kernel.org/r/1503819148-

nubus: Remove cast to void pointer

Casting void pointers to other pointer types is unnecessary.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Link: https://lore.kernel.org/r/1503819148-11676-1-git-send-email-himanshujha199640@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# bdeeed09 08-May-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Call bus_register unconditionally

Loading a NuBus driver module on a non-NuBus machine triggers the
BUG_ON(!drv->bus->p) in driver_register(), because bus_register() was
not called, because i

nubus: Call bus_register unconditionally

Loading a NuBus driver module on a non-NuBus machine triggers the
BUG_ON(!drv->bus->p) in driver_register(), because bus_register() was
not called, because it is conditional on MACH_IS_MAC.

Fix the crash by calling bus_register() unconditionally. Call it from
a postcore_initcall(), like other busses do.

Hence, the bus type is available for device_register(), which happens
in a subsys initcall, and for driver_register(), which happens in a
device or module initcall.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 7f86c765a6a2 ("nubus: Add support for the driver model")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...


# 7f86c765 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Add support for the driver model

This patch brings basic support for the Linux Driver Model to the
NuBus subsystem.

For flexibility, the matching of boards with drivers is left up to the
dri

nubus: Add support for the driver model

This patch brings basic support for the Linux Driver Model to the
NuBus subsystem.

For flexibility, the matching of boards with drivers is left up to the
drivers. This is also the approach taken by NetBSD. A board may have
many functions, and drivers may have to consider many functional
resources and board resources in order to match a device.

This implementation does not bind drivers to resources (nor does it bind
many drivers to the same board). Apple's NuBus declaration ROM design
is flexible enough to allow that, but I don't see a need to support it
as we don't use the "slot zero" resources (in the main logic board ROM).

Eliminate the global nubus_boards linked list by rewriting the procfs
board iterator around bus_for_each_dev(). Hence the nubus device refcount
can be used to determine the lifespan of board objects.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 41b84816 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Adopt standard linked list implementation

This increases code re-use and improves readability.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung

nubus: Adopt standard linked list implementation

This increases code re-use and improves readability.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 189e19e8 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Rename struct nubus_dev

It is misleading to call a functional resource a "device". In adopting
the Linux Driver Model, the struct device will be embedded in struct
nubus_board. That will comp

nubus: Rename struct nubus_dev

It is misleading to call a functional resource a "device". In adopting
the Linux Driver Model, the struct device will be embedded in struct
nubus_board. That will compound the terminlogy problem because drivers
will bind with boards, not with functional resources. Avoid this by
renaming struct nubus_dev as struct nubus_rsrc. "Functional resource"
is the vendor's terminology so this helps avoid confusion.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 2f7dd07e 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Rework /proc/bus/nubus/s/ implementation

The /proc/bus/nubus/s/ directory tree for any slot s is missing a lot
of information. The struct file_operations methods have long been left
unimpleme

nubus: Rework /proc/bus/nubus/s/ implementation

The /proc/bus/nubus/s/ directory tree for any slot s is missing a lot
of information. The struct file_operations methods have long been left
unimplemented (hence the familiar compile-time warning, "Need to set
some I/O handlers here").

Slot resources have a complex structure which varies depending on board
function. The logic for interpreting these ROM data structures is found
in nubus.c. Let's not duplicate that logic in proc.c.

Create the /proc/bus/nubus/s/ inodes while scanning slot s. During
descent through slot resource subdirectories, call the new
nubus_proc_add_foo() functions to create the procfs inodes.

Also add a new function, nubus_seq_write_rsrc_mem(), to write the
contents of a particular slot resource to a given seq_file. This is
used by the procfs file_operations methods, to finally give userspace
access to slot ROM information, such as the available video modes.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 883b8cb3 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Generalize block resource handling

Scrap the specialized code to unpack video mode name resources and
driver resources. It isn't useful.
Instead, add a re-usable function to handle lists of b

nubus: Generalize block resource handling

Scrap the specialized code to unpack video mode name resources and
driver resources. It isn't useful.
Instead, add a re-usable function to handle lists of block resources of
any kind, and descend into the video mode table resource directory.
Rename callers as nubus_get_foo(), consistent with their purpose and
with related functions in the same file.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 9f97977d 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Remove redundant code

Eliminate unused values from struct nubus_dev to save wasted memory
(a Radius PrecisionColor 24X card has about 95 functional resources
and up to six such cards may be f

nubus: Remove redundant code

Eliminate unused values from struct nubus_dev to save wasted memory
(a Radius PrecisionColor 24X card has about 95 functional resources
and up to six such cards may be fitted). Also remove redundant static
variable initialization, an unreachable !MACH_IS_MAC conditional,
the unused nubus_find_device() function, the bogus get_nubus_list()
prototype and the pointless card_present temporary variable.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# d7811a36 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Validate slot resource IDs

While we are here, include the slot number in the related error messages.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphic

nubus: Validate slot resource IDs

While we are here, include the slot number in the related error messages.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# f53bad08 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Fix log spam

Testing shows that a single Radius PrecisionColor 24X display board,
which has 95 functional resources, produces over a thousand lines of
log messages. Suppress these messages wi

nubus: Fix log spam

Testing shows that a single Radius PrecisionColor 24X display board,
which has 95 functional resources, produces over a thousand lines of
log messages. Suppress these messages with pr_debug().
Remove some redundant messages relating to nubus_get_subdir() calls.
Fix the format block debug messages as the sequence of entries is
backwards (my bad).
Move the "scanning slots" message to its proper location.

Fixes: 71ae40e4cf33 ("nubus: Clean up printk calls")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 460cf95e 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Use static functions where possible

This fixes a couple of warnings from 'make W=1':
drivers/nubus/nubus.c:790: warning: no previous prototype for 'nubus_probe_slot'
drivers/nubus/nubus.c:824

nubus: Use static functions where possible

This fixes a couple of warnings from 'make W=1':
drivers/nubus/nubus.c:790: warning: no previous prototype for 'nubus_probe_slot'
drivers/nubus/nubus.c:824: warning: no previous prototype for 'nubus_scan_bus'

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 2f828fb2 13-Jan-2018 Finn Thain <fthain@telegraphics.com.au>

nubus: Avoid array underflow and overflow

Check array indices. Avoid sprintf. Use buffers of sufficient size.
Use appropriate types for array length parameters.

Tested-by: Stan Johnson <userm57@yah

nubus: Avoid array underflow and overflow

Check array indices. Avoid sprintf. Use buffers of sufficient size.
Use appropriate types for array length parameters.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 8ee90c5c 26-Oct-2017 Finn Thain <fthain@telegraphics.com.au>

m68k/mac: Disentangle VIA/RBV and NuBus initialization

The Nubus subsystem should not be concerned with differences between VIA,
RBV and OSS platforms. It should be portable across Macs and PowerMac

m68k/mac: Disentangle VIA/RBV and NuBus initialization

The Nubus subsystem should not be concerned with differences between VIA,
RBV and OSS platforms. It should be portable across Macs and PowerMacs.
This goal has implications for the initialization code relating to bus
locking and slot interrupts.

During Nubus initialization, bus transactions are "unlocked": on VIA2 and
RBV machines, via_nubus_init() sets a bit in the via2[gBufB] register to
allow bus-mastering Nubus cards to arbitrate for the bus. This happens
upon subsys_initcall(nubus_init). But because nubus_init() has no effect
on card state, this sequence is arbitrary.

Moreover, when Penguin is used to boot Linux, the bus is already unlocked
when Linux starts. On OSS machines there's no attempt to unlock Nubus
transactions at all. (Maybe there's no benefit on that platform or maybe
no-one knows how.)

All of this demonstrates that there's no benefit in locking out
bus-mastering cards, as yet. (If the need arises, we could lock the bus
for the duration of a timing-critical operation.) NetBSD unlocks the
Nubus early (at VIA initialization) and we can do the same.

via_nubus_init() is also responsible for some VIA interrupt setup that
should happen earlier than subsys_initcall(nubus_init). And actually, the
Nubus subsystem need not be involved with slot interrupts: SLOT2IRQ
works fine because Nubus slot IRQs are geographically assigned
(regardless of platform).

For certain platforms with PDS slots, some Nubus IRQs may be platform
IRQs and this is not something that the NuBus subsystem should worry
about. So let's invoke via_nubus_init() earlier and make the platform
responsible for bus unlocking and interrupt setup instead of the NuBus
subsystem.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# b2441318 01-Nov-2017 Greg Kroah-Hartman <gregkh@linuxfoundation.org>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...


Revision tags: v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13
# 85cc313a 22-Apr-2017 Finn Thain <fthain@telegraphics.com.au>

nubus: Fix pointer validation

Fix bounds checking on slot-space pointer movement.
Remove redundant test for zero byte-lanes value.
Fix broken byte-lanes vs. address validation.

This patch changes t

nubus: Fix pointer validation

Fix bounds checking on slot-space pointer movement.
Remove redundant test for zero byte-lanes value.
Fix broken byte-lanes vs. address validation.

This patch changes the circumstances under which an error is printed to
the console and fixes the address validation.

The validation code should work correctly now: the broken test for a
valid bytelanes value is replaced with a working test (which eliminates
false negatives) and the 24-bit directory offset bounds check is fixed
(which eliminates false positives).

Please see "Designing Cards and Drivers for the Macintosh Family"
ch. 8, "NuBus Card Firmware" for an explanation of the bytelanes check
and directory offset value.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# 475e6e15 22-Apr-2017 David Huggins-Daines <dhd@debian.org>

nubus: Remove slot zero probe

Some long forgotten changes from the linux-mac68k CVS:

Remove the slot 0 (ROM) probing.
Remove the pointless White Screen Of Death crap.

The original commit is here:

nubus: Remove slot zero probe

Some long forgotten changes from the linux-mac68k CVS:

Remove the slot 0 (ROM) probing.
Remove the pointless White Screen Of Death crap.

The original commit is here:

http://linux-mac68k.cvs.sourceforge.net/viewvc/linux-mac68k/linux-mac68k/drivers/nubus/nubus.c?r1=1.22.2.1&r2=1.22.2.2&pathrev=linux-2_2

This is mostly dead code removal. It is also a reversion to the
pre-v2.3.17 version. The old code was thoroughly tested in Debian Sarge.

The present code for probing fake slot resources in Apple's on-board
(slot zero) ROMs could be useful if replaced the macintosh_config struct.
But it can't do so and we don't want two mechanisms for identifying
on-board hardware.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


Revision tags: v4.10.12, v4.10.11, v4.10.10
# f42e5550 08-Apr-2017 Finn Thain <fthain@telegraphics.com.au>

nubus: Clean up whitespace

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
[geert: rebased]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>


# 71ae40e4 08-Apr-2017 David Huggins-Daines <dhd@debian.org>

nubus: Clean up printk calls

Some long forgotten changes from the linux-mac68k CVS:

Fix swapped DrvrSW and DrvrHW values in printk message.
Suppress debug printk messages.
Avoid console_loglevel mi

nubus: Clean up printk calls

Some long forgotten changes from the linux-mac68k CVS:

Fix swapped DrvrSW and DrvrHW values in printk message.
Suppress debug printk messages.
Avoid console_loglevel misuse.

The original commits are these:

http://linux-mac68k.cvs.sourceforge.net/viewvc/linux-mac68k/linux-mac68k/drivers/nubus/nubus.c?r1=1.22.2.1&r2=1.22.2.2&pathrev=linux-2_2
http://linux-mac68k.cvs.sourceforge.net/viewvc/linux-mac68k/linux-mac68k/drivers/nubus/nubus.c?r1=1.21&r2=1.22&pathrev=linux-2_2

The CVS commits fell short of removing all of the misuse of
console_loglevel in nubus_add_board() so I finished the job.
I've also added some missing message severity levels and converted
a printk loop to the MAC address "%pM" format specifier.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


# e36b9913 08-Apr-2017 David Huggins-Daines <dhd@debian.org>

nubus: Fix nubus_rewinddir

A long forgotten fix from the linux-mac68k CVS:

Initialize dir->done pointer in nubus_rewinddir().

The original commit is here:

http://linux-mac68k.cvs.sourceforge.net/

nubus: Fix nubus_rewinddir

A long forgotten fix from the linux-mac68k CVS:

Initialize dir->done pointer in nubus_rewinddir().

The original commit is here:

http://linux-mac68k.cvs.sourceforge.net/viewvc/linux-mac68k/linux-mac68k/drivers/nubus/nubus.c?r1=1.22&r2=1.22.2.1&pathrev=linux-2_2

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


Revision tags: v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7
# bcf8eb09 28-Sep-2014 Geert Uytterhoeven <geert@linux-m68k.org>

nubus: Remove superfluous interrupt disable/restore

As of commit e4dc601bf99ccd1c ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.

Signed-off-by: Gee

nubus: Remove superfluous interrupt disable/restore

As of commit e4dc601bf99ccd1c ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

show more ...


Revision tags: v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15
# a8fe19eb 04-Jun-2014 Borislav Petkov <bp@suse.de>

kernel/printk: use symbolic defines for console loglevels

... instead of naked numbers.

Stuff in sysrq.c used to set it to 8 which is supposed to mean above
default level so set it to DEBUG instead

kernel/printk: use symbolic defines for console loglevels

... instead of naked numbers.

Stuff in sysrq.c used to set it to 8 which is supposed to mean above
default level so set it to DEBUG instead as we're terminating/killing all
tasks and we want to be verbose there.

Also, correct the check in x86_64_start_kernel which should be >= as
we're clearly issuing the string there for all debug levels, not only
the magical 10.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...


Revision tags: v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7
# 11db656a 10-Apr-2013 David Howells <dhowells@redhat.com>

nubus: Don't use create_proc_read_entry()

Don't use create_proc_read_entry() as that is deprecated, but rather use
proc_create_data() and seq_file instead.

Signed-off-by: David Howells <dhowells@re

nubus: Don't use create_proc_read_entry()

Don't use create_proc_read_entry() as that is deprecated, but rather use
proc_create_data() and seq_file instead.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...


Revision tags: v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1
# 9ffc93f2 28-Mar-2012 David Howells <dhowells@redhat.com>

Remove all #inclusions of asm/system.h

Remove all #inclusions of asm/system.h preparatory to splitting and killing
it. Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/sy

Remove all #inclusions of asm/system.h

Remove all #inclusions of asm/system.h preparatory to splitting and killing
it. Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>

show more ...


Revision tags: v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3
# 5a0e3ad6 24-Mar-2010 Tejun Heo <tj@kernel.org>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

show more ...


123