Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22 |
|
#
8c086312 |
| 14-Feb-2019 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtlwifi: btcoex: Replace old-style license information
The old-style license information is replaced by the SPDX form. There are no code changes.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.
rtlwifi: btcoex: Replace old-style license information
The old-style license information is replaced by the SPDX form. There are no code changes.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
Revision tags: v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
9177c336 |
| 19-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Add wifi_only series ops to control solo card
Originally, btcoex controls the antenna of combo card, but solo card is also needed to setup properly. The new ops are named with suffi
rtlwifi: btcoex: Add wifi_only series ops to control solo card
Originally, btcoex controls the antenna of combo card, but solo card is also needed to setup properly. The new ops are named with suffix '_wifi_only' opposited to original btc_ops, and new structures and definitions are also introduced. The wifi_only oly contains four ops that are initial variable, hw config, scan notify, and switch band notify.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
17bf8510 |
| 19-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Add switch band notify for btc
BT shares 2.4G band but not 5G band, so inform current band to btcoex to setup antenna properly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Ack
rtlwifi: btcoex: Add switch band notify for btc
BT shares 2.4G band but not 5G band, so inform current band to btcoex to setup antenna properly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
40d9dd4f |
| 17-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Remove global variables from btcoex
Remove global variables, so btcoexist can support multiple instances simultaneously.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off
rtlwifi: btcoex: Remove global variables from btcoex
Remove global variables, so btcoexist can support multiple instances simultaneously.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
a44709bb |
| 17-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Add power_on_setting routine
After mac power-on sequence, wifi will start to work so notify btcoex the event to configure registers especially related to antenna. This will not only
rtlwifi: btcoex: Add power_on_setting routine
After mac power-on sequence, wifi will start to work so notify btcoex the event to configure registers especially related to antenna. This will not only help to assign antenna but also to yield better user experience.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
610247f4 |
| 29-Dec-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: Improve debugging by using debugfs
Use debugfs to dump register and btcoex status, and also write registers and h2c.
We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address
rtlwifi: Improve debugging by using debugfs
Use debugfs to dump register and btcoex status, and also write registers and h2c.
We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address as subdirectory with several entries to dump mac_reg, bb_reg, rf_reg etc. An example is /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/mac_0
This change permits examination of device registers in a dynamic manner, a feature not available with the current debug mechanism.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
6aad6075 |
| 02-Jul-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: Add BT_MP_INFO to c2h handler.
We use H2C to ask BT's status, and C2H will return the status.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwf
rtlwifi: Add BT_MP_INFO to c2h handler.
We use H2C to ask BT's status, and C2H will return the status.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
42213f2f |
| 18-Jun-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoexist control to enter/leave LPS
To yield better user experience, have btcoex control LPS's parameters.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <La
rtlwifi: btcoexist control to enter/leave LPS
To yield better user experience, have btcoex control LPS's parameters.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
c692205d |
| 18-Jun-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: add btc_is_bt_lps_on() for btcoexist
If LPS is controlled by btcoex, this function tell driver LPS is on or off.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finge
rtlwifi: add btc_is_bt_lps_on() for btcoexist
If LPS is controlled by btcoex, this function tell driver LPS is on or off.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
2635664e |
| 18-Jun-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: Add rx ampdu cfg for btcoexist.
If RX ampdu is too long, BT will have less time.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc
rtlwifi: Add rx ampdu cfg for btcoexist.
If RX ampdu is too long, BT will have less time.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
54685f9c |
| 18-Jun-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: Add btcoex record_pwr_mode
Add btcoex record pwr mode to control LPS's parameters and share time with BT.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larr
rtlwifi: Add btcoex record_pwr_mode
Add btcoex record pwr mode to control LPS's parameters and share time with BT.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
7fe1fe75 |
| 06-Feb-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: rtl8723be: btcoex: add package_type function to btcoex
The new code handles the package-type of the chip.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larr
rtlwifi: rtl8723be: btcoex: add package_type function to btcoex
The new code handles the package-type of the chip.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
0de9b5db |
| 06-Feb-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: move btcoex's ant_num declaration
File halbtcoutsrc.c is a better place for routine rtl_get_hwpg_ant_num() than file rtl_btc.c.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-
rtlwifi: move btcoex's ant_num declaration
File halbtcoutsrc.c is a better place for routine rtl_get_hwpg_ant_num() than file rtl_btc.c.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
db8cb009 |
| 06-Feb-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: rtl8723be: btcoexist: Add single_ant_path
Some devices with RTL8732BE wifi/Bluetooth adapters are shipped with only a single antenna. On a subset of these, the EEPROM is incorectly coded to
rtlwifi: rtl8723be: btcoexist: Add single_ant_path
Some devices with RTL8732BE wifi/Bluetooth adapters are shipped with only a single antenna. On a subset of these, the EEPROM is incorectly coded to indicate the wrong connection. The resulting problems have been fixed for wifi. This change handles them for BT.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1 |
|
#
f1d2b4d3 |
| 07-Sep-2015 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtlwifi: rtl818x: Move drivers into new realtek directory
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having di
rtlwifi: rtl818x: Move drivers into new realtek directory
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22 |
|
#
8c086312 |
| 14-Feb-2019 |
Larry Finger <Larry.Finger@lwfinger.net> |
rtlwifi: btcoex: Replace old-style license information The old-style license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <La
rtlwifi: btcoex: Replace old-style license information The old-style license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
Revision tags: v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
9177c336 |
| 19-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Add wifi_only series ops to control solo card Originally, btcoex controls the antenna of combo card, but solo card is also needed to setup properly. The new ops are name
rtlwifi: btcoex: Add wifi_only series ops to control solo card Originally, btcoex controls the antenna of combo card, but solo card is also needed to setup properly. The new ops are named with suffix '_wifi_only' opposited to original btc_ops, and new structures and definitions are also introduced. The wifi_only oly contains four ops that are initial variable, hw config, scan notify, and switch band notify. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
17bf8510 |
| 19-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Add switch band notify for btc BT shares 2.4G band but not 5G band, so inform current band to btcoex to setup antenna properly. Signed-off-by: Ping-Ke Shih <pks
rtlwifi: btcoex: Add switch band notify for btc BT shares 2.4G band but not 5G band, so inform current band to btcoex to setup antenna properly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
40d9dd4f |
| 17-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Remove global variables from btcoex Remove global variables, so btcoexist can support multiple instances simultaneously. Signed-off-by: Ping-Ke Shih <pkshih@rea
rtlwifi: btcoex: Remove global variables from btcoex Remove global variables, so btcoexist can support multiple instances simultaneously. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
a44709bb |
| 17-Jan-2018 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoex: Add power_on_setting routine After mac power-on sequence, wifi will start to work so notify btcoex the event to configure registers especially related to antenna. This w
rtlwifi: btcoex: Add power_on_setting routine After mac power-on sequence, wifi will start to work so notify btcoex the event to configure registers especially related to antenna. This will not only help to assign antenna but also to yield better user experience. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
610247f4 |
| 29-Dec-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: Improve debugging by using debugfs Use debugfs to dump register and btcoex status, and also write registers and h2c. We create topdir in /sys/kernel/debug/rtlwifi/, and
rtlwifi: Improve debugging by using debugfs Use debugfs to dump register and btcoex status, and also write registers and h2c. We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address as subdirectory with several entries to dump mac_reg, bb_reg, rf_reg etc. An example is /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/mac_0 This change permits examination of device registers in a dynamic manner, a feature not available with the current debug mechanism. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
6aad6075 |
| 02-Jul-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: Add BT_MP_INFO to c2h handler. We use H2C to ask BT's status, and C2H will return the status. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Fing
rtlwifi: Add BT_MP_INFO to c2h handler. We use H2C to ask BT's status, and C2H will return the status. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
42213f2f |
| 18-Jun-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: btcoexist control to enter/leave LPS To yield better user experience, have btcoex control LPS's parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-
rtlwifi: btcoexist control to enter/leave LPS To yield better user experience, have btcoex control LPS's parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
c692205d |
| 18-Jun-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: add btc_is_bt_lps_on() for btcoexist If LPS is controlled by btcoex, this function tell driver LPS is on or off. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed
rtlwifi: add btc_is_bt_lps_on() for btcoexist If LPS is controlled by btcoex, this function tell driver LPS is on or off. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
#
2635664e |
| 18-Jun-2017 |
Ping-Ke Shih <pkshih@realtek.com> |
rtlwifi: Add rx ampdu cfg for btcoexist. If RX ampdu is too long, BT will have less time. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Fin
rtlwifi: Add rx ampdu cfg for btcoexist. If RX ampdu is too long, BT will have less time. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|