|
Revision tags: v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26 |
|
| #
2858f60a |
| 25-Feb-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt76x2: unify mt76x2[u]_mac_resume
They are now the same and short enough to be turned into an inline function
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
| #
4606a26c |
| 25-Feb-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt76x02: fix ED/CCA enabling/disabling
ED/CCA needs to be disable before stopping the MAC to avoid hangs from tx
being blocked. It must only be enabled again after the MAC has been
mt76: mt76x02: fix ED/CCA enabling/disabling
ED/CCA needs to be disable before stopping the MAC to avoid hangs from tx
being blocked. It must only be enabled again after the MAC has been started
again.
In many places this wasn't done properly, so fix this by always clearing
the relevant ED/CCA bits in mt76x2_mac_stop and set it up again after
channel change or calibration is done
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18 |
|
| #
4ece1e0a |
| 09-Nov-2018 |
Stanislaw Gruszka <sgruszka@redhat.com> |
mt76: remove wait argument from mt76x02_mcu_calibrate
We always wait for CMD_CALIBRATION_OP mcu message, but wait argument is used
for do additional MT_MCU_COM_REG0 register operations,
mt76: remove wait argument from mt76x02_mcu_calibrate
We always wait for CMD_CALIBRATION_OP mcu message, but wait argument is used
for do additional MT_MCU_COM_REG0 register operations, which are needed
for mt76x2e devices and we can use appropriate check instead of wait argument.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
04289783 |
| 06-Nov-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2u: phy: run phy_channel_calibrate after channel switch
Perform channel calibration after each channel switch and not only after
connection establishment since NetworkManager perfor
mt76x2u: phy: run phy_channel_calibrate after channel switch
Perform channel calibration after each channel switch and not only after
connection establishment since NetworkManager perform multiple frequency
scanning if RSSI in lower a given threshold
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
4f833fad |
| 06-Nov-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2u: phy: add TX_SHAPING calibration
Add MCU_CAL_TX_SHAPING calibration in mt76x2u_phy_channel_calibrate
routine since now mt76x2 and mt76x2u driver run the same firmware
Si
mt76x2u: phy: add TX_SHAPING calibration
Add MCU_CAL_TX_SHAPING calibration in mt76x2u_phy_channel_calibrate
routine since now mt76x2 and mt76x2u driver run the same firmware
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15 |
|
| #
989582e5 |
| 14-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2u: align channel gain logic to mt76x2 one
Update vga tuning algorithm to the one used in mt76x2 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed
mt76x2u: align channel gain logic to mt76x2 one
Update vga tuning algorithm to the one used in mt76x2 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v4.18.14 |
|
| #
4afeb396 |
| 12-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x0: eeprom: introduce mt76x0_tssi_enabled routine
Add mt76x0_tssi_enabled in order to check if tssi compensation
is enabled since mt76x0 condition differs from mt76x2 one.
Moreov
mt76x0: eeprom: introduce mt76x0_tssi_enabled routine
Add mt76x0_tssi_enabled in order to check if tssi compensation
is enabled since mt76x0 condition differs from mt76x2 one.
Moreover move back mt76x02_temp_tx_alc_enabled and mt76x02_tssi_enabled
routines in mt76x2/eeprom.h since they are mt76x2 specific
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
370c6415 |
| 12-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: move mt76x02_phy_set_band in mt76x02-lib module
Move mt76x02_phy_set_band routine in mt76x02_phy.c since
it is shared between mt76x0 and mt76x2 drivers and remove
duplicated co
mt76: move mt76x02_phy_set_band in mt76x02-lib module
Move mt76x02_phy_set_band routine in mt76x02_phy.c since
it is shared between mt76x0 and mt76x2 drivers and remove
duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
032c08f4 |
| 12-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: move mt76x02_phy_set_bw in mt76x02-lib module
Move mt76x02_phy_set_bw routine in mt76x02_phy.c since
it is shared between mt76x0 and mt76x2 drivers and remove
duplicated code
mt76: move mt76x02_phy_set_bw in mt76x02-lib module
Move mt76x02_phy_set_bw routine in mt76x02_phy.c since
it is shared between mt76x0 and mt76x2 drivers and remove
duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v4.18.13 |
|
| #
26a9daa6 |
| 07-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
bfdff5d0 |
| 07-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c
Use mt76x02_dev data structure as reference in mt76x02_phy.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lore
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c
Use mt76x02_dev data structure as reference in mt76x02_phy.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
499cd0aa |
| 07-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c
Use mt76x02_dev data structure as reference in mt76x02_mcu.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lore
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c
Use mt76x02_dev data structure as reference in mt76x02_mcu.c
instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
e40803f2 |
| 04-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2: move mt76x2_dev in mt76x02_util.h
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev
in order to be shared between mt76x2 and mt76x0 driver
Signed-off-by: Lo
mt76x2: move mt76x2_dev in mt76x02_util.h
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev
in order to be shared between mt76x2 and mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
50b9e8d5 |
| 04-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c
Move mt76x02_phy_get_min_avg_rssi in mt76x02-lib module since
it will be used by mt76x0 driver in order to unify rxwi parsing
mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c
Move mt76x02_phy_get_min_avg_rssi in mt76x02-lib module since
it will be used by mt76x0 driver in order to unify rxwi parsing
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v4.18.12 |
|
| #
1613c621 |
| 01-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2: move mt76x2 source files to mt76x2 folder
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and
leave just shared code in mt76 root folder
Acked-by: Stanislaw Gruszka
mt76x2: move mt76x2 source files to mt76x2 folder
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and
leave just shared code in mt76 root folder
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|