|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23 |
|
| #
ec193b41 |
| 03-Apr-2023 |
Lorenzo Bianconi <lorenzo@kernel.org> |
wifi: mt76: move irq_tasklet in mt76_dev struct
irq_tasklet struct is used by most of the drivers (e.g. mt7915, mt7921,
mt7615, mt7663 and mt7996) so move it in common code.
Signed-off-by: Lorenzo
wifi: mt76: move irq_tasklet in mt76_dev struct
irq_tasklet struct is used by most of the drivers (e.g. mt7915, mt7921,
mt7615, mt7663 and mt7996) so move it in common code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8 |
|
| #
970be1df |
| 24-Sep-2021 |
Felix Fietkau <nbd@nbd.name> |
mt76: disable BH around napi_schedule() calls
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq
handling, so it must not be called in a pure process context with BH enable
mt76: disable BH around napi_schedule() calls
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq
handling, so it must not be called in a pure process context with BH enabled.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61 |
|
| #
a2e75961 |
| 22-Aug-2021 |
Christophe JAILLET <christophe.jaillet@wanadoo.fr> |
mt76: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below.
It has been compile tested.
@@
mt76: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below.
It has been compile tested.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
| #
7715a1d5 |
| 02-Feb-2021 |
Ryder Lee <ryder.lee@mediatek.com> |
mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open coded
Use PCI standard defines.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix
mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open coded
Use PCI standard defines.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
1755f6ad |
| 26-Jan-2021 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76_connac: move pm utility routines in mt76_connac_lib module
Move power_save common code shared between mt7663 and mt7921 in
mt76_connac module
Signed-off-by: Lorenzo Bianconi <lorenzo@ker
mt76: mt76_connac: move pm utility routines in mt76_connac_lib module
Move power_save common code shared between mt7663 and mt7921 in
mt76_connac module
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
55d4c19c |
| 26-Jan-2021 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76_connac: move WoW and suspend code in mt76_connac_mcu module
Move WoW and suspend code in mt76_connac_mcu module in order to be reused in
mt7615 and mt7921 drivers
Signed-off-by: Lorenzo
mt76: mt76_connac: move WoW and suspend code in mt76_connac_mcu module
Move WoW and suspend code in mt76_connac_mcu module in order to be reused in
mt7615 and mt7921 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
d0e274af |
| 26-Jan-2021 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76_connac: create mcu library
Introduce mt76_connac common mcu library for code sharing between mt7615 and
mt7921 devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by:
mt76: mt76_connac: create mcu library
Introduce mt76_connac common mcu library for code sharing between mt7615 and
mt7921 devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
| #
781eef5b |
| 24-Jul-2020 |
Felix Fietkau <nbd@nbd.name> |
mt76: convert from tx tasklet to tx worker thread
This improves performance by allowing the scheduler to move the tx scheduling
work to idle CPUs. Since tx scheduling work is very latency sensitive
mt76: convert from tx tasklet to tx worker thread
This improves performance by allowing the scheduler to move the tx scheduling
work to idle CPUs. Since tx scheduling work is very latency sensitive and
kept short via AQL, sched_set_fifo_low is used to keep worker priority above
normal tasks
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.7.10, v5.4.53 |
|
| #
186b659c |
| 20-Jul-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: move drv_own/fw_own in mt7615_mcu_ops
Introduce set_drv_ctrl and set_fw_ctrl function pointers in
mt7615_mcu_ops data structure. This is a preliminary patch to enable
runtime-pm for no
mt76: mt7615: move drv_own/fw_own in mt7615_mcu_ops
Introduce set_drv_ctrl and set_fw_ctrl function pointers in
mt7615_mcu_ops data structure. This is a preliminary patch to enable
runtime-pm for non-pci chipsets
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.52, v5.7.9, v5.7.8, v5.4.51 |
|
| #
3d0558c8 |
| 03-Jul-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: acquire driver_own before configuring device for suspend
Make sure to wake the device in mt7615_pci_suspend in order to properly
configure device registers before suspend
Signed-off-b
mt76: mt7615: acquire driver_own before configuring device for suspend
Make sure to wake the device in mt7615_pci_suspend in order to properly
configure device registers before suspend
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43 |
|
| #
f473b42a |
| 24-May-2020 |
Felix Fietkau <nbd@nbd.name> |
mt76: only iterate over initialized rx queues
Fixes the following reported crash:
[ 2.361127] BUG: spinlock bad magic on CPU#0, modprobe/456
[ 2.361583] lock: 0xffffa1287525b3b8, .magic: 000
mt76: only iterate over initialized rx queues
Fixes the following reported crash:
[ 2.361127] BUG: spinlock bad magic on CPU#0, modprobe/456
[ 2.361583] lock: 0xffffa1287525b3b8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 2.362250] CPU: 0 PID: 456 Comm: modprobe Not tainted 4.14.177 #5
[ 2.362751] Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.75.0 06/17/2019
[ 2.363343] Call Trace:
[ 2.363552] dump_stack+0x97/0xdb
[ 2.363826] ? spin_bug+0xa6/0xb3
[ 2.364096] do_raw_spin_lock+0x6a/0x9a
[ 2.364417] mt76_dma_rx_fill+0x44/0x1de [mt76]
[ 2.364787] ? mt76_dma_kick_queue+0x18/0x18 [mt76]
[ 2.365184] mt76_dma_init+0x53/0x85 [mt76]
[ 2.365532] mt7615_dma_init+0x3d7/0x546 [mt7615e]
[ 2.365928] mt7615_register_device+0xe6/0x1a0 [mt7615e]
[ 2.366364] mt7615_mmio_probe+0x14b/0x171 [mt7615e]
[ 2.366771] mt7615_pci_probe+0x118/0x13b [mt7615e]
[ 2.367169] pci_device_probe+0xaf/0x13d
[ 2.367491] driver_probe_device+0x284/0x2ca
[ 2.367840] __driver_attach+0x7a/0x9e
[ 2.368146] ? driver_attach+0x1f/0x1f
[ 2.368451] bus_for_each_dev+0xa0/0xdb
[ 2.368765] bus_add_driver+0x132/0x204
[ 2.369078] driver_register+0x8e/0xcd
[ 2.369384] do_one_initcall+0x160/0x257
[ 2.369706] ? 0xffffffffc0240000
[ 2.369980] do_init_module+0x60/0x1bb
[ 2.370286] load_module+0x18c2/0x1a2b
[ 2.370596] ? kernel_read_file+0x141/0x1b9
[ 2.370937] ? kernel_read_file_from_fd+0x46/0x71
[ 2.371320] SyS_finit_module+0xcc/0xf0
[ 2.371636] do_syscall_64+0x6b/0xf7
[ 2.371930] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 2.372344] RIP: 0033:0x7da218ae4199
[ 2.372637] RSP: 002b:00007fffd0608398 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 2.373252] RAX: ffffffffffffffda RBX: 00005a705449df90 RCX: 00007da218ae4199
[ 2.373833] RDX: 0000000000000000 RSI: 00005a7052e73bd8 RDI: 0000000000000006
[ 2.374411] RBP: 00007fffd06083e0 R08: 0000000000000000 R09: 00005a705449d540
[ 2.374989] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000
[ 2.375569] R13: 00005a705449def0 R14: 00005a7052e73bd8 R15: 0000000000000000
Reported-by: Sean Wang <sean.wang@mediatek.com>
Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
e47f2245 |
| 23-May-2020 |
DENG Qingfang <dqfext@gmail.com> |
mt76: mt7615: add support for MT7611N
MT7611N is basically the same as MT7615N, except it only supports 5GHz
It is used by some TP-Link and Mercury wireless routers
Signed-off-by: DENG Qingfang <dq
mt76: mt7615: add support for MT7611N
MT7611N is basically the same as MT7615N, except it only supports 5GHz
It is used by some TP-Link and Mercury wireless routers
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37 |
|
| #
6dd4072c |
| 01-May-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: introduce PM support
Introduce suspend/resume to mt7615e driver
Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com>
Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.co
mt76: mt7615: introduce PM support
Introduce suspend/resume to mt7615e driver
Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com>
Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
a69b0b30 |
| 30-Apr-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: free pci_vector if mt7615_pci_probe fails
Always free pci irq vector if mt7615_pci_probe routine fails
Moreover free irq in mt7615_pci_remove routine
Co-developed-by: Soul Huang <sean
mt76: mt7615: free pci_vector if mt7615_pci_probe fails
Always free pci irq vector if mt7615_pci_probe routine fails
Moreover free irq in mt7615_pci_remove routine
Co-developed-by: Soul Huang <sean.wang@mediatek.com>
Signed-off-by: Soul Huang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.36 |
|
| #
f2dc8ea1 |
| 28-Apr-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7663: add the possibility to load firmware v2
mt7663 firmware v2 is used for embedded devices since it has more completed
features in AP mode.
Add the capability to specify which firmware lo
mt76: mt7663: add the possibility to load firmware v2
mt7663 firmware v2 is used for embedded devices since it has more completed
features in AP mode.
Add the capability to specify which firmware load first (v3 or v2)
using prefer_offload_fw kernel parameter and fallback to the other one
if the selected firmware fails to load
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.35, v5.4.34 |
|
| #
450affca |
| 17-Apr-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: disable aspm by default
The vendor SDK also disables ASPM by default
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Revision tags: v5.4.33, v5.4.32 |
|
| #
9fbb4b86 |
| 09-Apr-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: enable MSI by default
Enable MSI/MSI-X PCI interrupts by default. This patch has been tested
using Banana Pi r64 board
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-
mt76: mt7615: enable MSI by default
Enable MSI/MSI-X PCI interrupts by default. This patch has been tested
using Banana Pi r64 board
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26 |
|
| #
f40ac0f3 |
| 17-Mar-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: introduce mt7663e support
Introduce support for mt7663e 802.11ac 2x2:2 chipset to mt7615 driver.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wan
mt76: mt7615: introduce mt7663e support
Introduce support for mt7663e 802.11ac 2x2:2 chipset to mt7615 driver.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
94f83b66 |
| 17-Mar-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: introduce mt7615_register_map
In order to reuse mt7615 code adding support for mt7663e driver,
introduce mt7615e_reg_map since mt7663e and mt7615 rely on a
different base registers def
mt76: mt7615: introduce mt7615_register_map
In order to reuse mt7615 code adding support for mt7663e driver,
introduce mt7615e_reg_map since mt7663e and mt7615 rely on a
different base registers definitions.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5 |
|
| #
35da599f |
| 18-Dec-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt7615: implement probing and firmware loading on MT7622
MT7622 does not have a CR4 microcontroller, so it only uses its own N9
firmware.
Co-developed-by: Shayne Chen <shayne.chen@mediatek.co
mt76: mt7615: implement probing and firmware loading on MT7622
MT7622 does not have a CR4 microcontroller, so it only uses its own N9
firmware.
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.4 |
|
| #
57ec55e9 |
| 16-Dec-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt7615: move mmio related code from pci.c to mmio.c
Will be shared with MT7622 SoC support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
| #
a3f657ec |
| 29-Dec-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: move dev_irq tracepoint in mt76 module
Move dev_irq tracepoint in common code in order to be reused by mt7603
and mt7615 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-of
mt76: move dev_irq tracepoint in mt76 module
Move dev_irq tracepoint in common code in order to be reused by mt7603
and mt7615 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.4.3 |
|
| #
3e384828 |
| 05-Dec-2019 |
Felix Fietkau <nbd@nbd.name> |
mt7615: replace sta_state callback with sta_add/sta_remove
The MT7615 firmware needs to know the association id at creation time,
which is unavailable during the transition from notexist to none in
mt7615: replace sta_state callback with sta_add/sta_remove
The MT7615 firmware needs to know the association id at creation time,
which is unavailable during the transition from notexist to none in
.sta_state.
This can cause a number of issues, probably also breaking powersave
support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
|
Revision tags: v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7 |
|
| #
011849e0 |
| 16-Oct-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: move state from struct mt76_dev to mt76_phy
Allows keeping per-wiphy state separate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Revision tags: v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1 |
|
| #
6bfa6e38 |
| 18-Sep-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7615: report tx_time, bss_rx and busy time to mac80211
Report tx time/rx time and obss time from hw mib counters to fill survey
info requested by mac80211
Co-developed-by: Felix Fietkau <nb
mt76: mt7615: report tx_time, bss_rx and busy time to mac80211
Report tx time/rx time and obss time from hw mib counters to fill survey
info requested by mac80211
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|