Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17 |
|
#
a71ace35 |
| 01-Jan-2023 |
Lorenzo Bianconi <lorenzo@kernel.org> |
wifi: mt76: mt7603: avoid mcu_restart function pointer
Run mt7603_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible.
Signed-off-by: Lorenzo Bianconi <loren
wifi: mt76: mt7603: avoid mcu_restart function pointer
Run mt7603_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5 |
|
#
4bbd6d83 |
| 23-Nov-2021 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: introduce SAR support
Add SAR spec support to mt7603 driver to allow configuring SAR power limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lore
mt76: mt7603: introduce SAR support
Add SAR spec support to mt7603 driver to allow configuring SAR power limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31 |
|
#
53d35b1a |
| 15-Apr-2021 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: improve mcu error logging
Dump mcu command code in hex and related prefix to help debugging
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
Revision tags: v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
#
e637763b |
| 11-Nov-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: move mcu queues to mt76_dev q_mcu array
Move mcu queue to a dedicated array q_mcu in mt76_dev structure. This is a preliminary patch to move data queues in mt76_phy and properly support dbdc
mt76: move mcu queues to mt76_dev q_mcu array
Move mcu queue to a dedicated array q_mcu in mt76_dev structure. This is a preliminary patch to move data queues in mt76_phy and properly support dbdc
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
d95093a1 |
| 11-Nov-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: rely on mt76_queue in tx_queue_skb_raw signature
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Sig
mt76: rely on mt76_queue in tx_queue_skb_raw signature
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.8.17, v5.8.16 |
|
#
3cb43b66 |
| 14-Oct-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: move mt76_mcu_send_firmware in common module
Move mt76_mcu_send_firmware routine in common code since it is actually shared between mt7615, mt7663, mt7603 and mt7915 devices
Signed-off-by: Lo
mt76: move mt76_mcu_send_firmware in common module
Move mt76_mcu_send_firmware routine in common code since it is actually shared between mt7615, mt7663, mt7603 and mt7915 devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.8.15, v5.9, v5.8.14, v5.8.13 |
|
#
14b80ba2 |
| 29-Sep-2020 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt7603: switch to .mcu_skb_send_msg
Reduces code duplication
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
#
96a607b6 |
| 29-Sep-2020 |
Felix Fietkau <nbd@nbd.name> |
mt76: move mcu timeout handling to .mcu_parse_response
Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
#
f320d812 |
| 29-Sep-2020 |
Felix Fietkau <nbd@nbd.name> |
mt76: implement .mcu_parse_response in struct mt76_mcu_ops
Do not free skb inside that function Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
#
cb5cdd4c |
| 29-Sep-2020 |
Felix Fietkau <nbd@nbd.name> |
mt76: rename __mt76_mcu_send_msg to mt76_mcu_send_msg
Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
Revision tags: v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31 |
|
#
bb31a80e |
| 02-Apr-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: add headroom and tailroom to mt76_mcu_ops data structure
Introduce headroom and tailroom to mt76_mcu_ops data structure in order to unify the routine used for mcu message allocation. This is a
mt76: add headroom and tailroom to mt76_mcu_ops data structure
Introduce headroom and tailroom to mt76_mcu_ops data structure in order to unify the routine used for mcu message allocation. This is a preliminary patch to add mt7663u support
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26 |
|
#
3b64e41b |
| 17-Mar-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: always init to 0 mcu messages
Always initialize to 0 mcu messages since if they are not propely configured they could hang the firmware.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> S
mt76: always init to 0 mcu messages
Always initialize to 0 mcu messages since if they are not propely configured they could hang the firmware.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19 |
|
#
09872957 |
| 08-Feb-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: Introduce mt76_mcu data structure
Introduce mt76_mcu data structure to contain common fields between mt76u_mcu and mt76e_mcu. Initialize mcu common fields in mt76_alloc_device(). Rely on mt76_
mt76: Introduce mt76_mcu data structure
Introduce mt76_mcu data structure to contain common fields between mt76u_mcu and mt76e_mcu. Initialize mcu common fields in mt76_alloc_device(). Rely on mt76_mcu in mt76_mcu_rx_event and in mt76_mcu_get_response in order to reuse them in usb code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7 |
|
#
beaaeb6b |
| 16-Oct-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: move txpower and antenna mask to struct mt76_phy
Adds multiple wiphy support to mt76_get_txpower
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
#
96747a51 |
| 12-Oct-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: move channel state to struct mt76_phy
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concur
mt76: move channel state to struct mt76_phy
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3 |
|
#
7f17b86a |
| 24-Jul-2019 |
Ryder Lee <ryder.lee@mediatek.com> |
mt76: mt7603: fix some checkpatch warnings
This fixes the following checkpatch warnings:
WARNING: Improper SPDX comment style CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ry
mt76: mt7603: fix some checkpatch warnings
This fixes the following checkpatch warnings:
WARNING: Improper SPDX comment style CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.2.2, v5.2.1, v5.2, v5.1.16 |
|
#
676fabd1 |
| 27-Jun-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types)
Fix the following sparse warning in mt7603_mcu_set_eeprom: drivers/net/wireless/mediatek/mt76/mt7603/m
mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types)
Fix the following sparse warning in mt7603_mcu_set_eeprom: drivers/net/wireless/mediatek/mt76/mt7603/mcu.c:376:30: sparse: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7603/mcu.c:376:30: sparse: expected unsigned short [usertype] addr drivers/net/wireless/mediatek/mt76/mt7603/mcu.c:376:30: sparse: got restricted __le16 [usertype]
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11 |
|
#
4d2a6f7b |
| 30-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: dynamically alloc mcu req in mt7603_mcu_set_eeprom
Do not allocate mcu requests on the stack in mt7603_mcu_set_eeprom in order to avoid the following warning:
Warning: the frame size
mt76: mt7603: dynamically alloc mcu req in mt7603_mcu_set_eeprom
Do not allocate mcu requests on the stack in mt7603_mcu_set_eeprom in order to avoid the following warning:
Warning: the frame size of 1032 bytes is larger than 1024 bytes Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
4d0fe26f |
| 27-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: report firmware version using ethtool
Print fw_ver and build_date members of struct mt7603_fw_trailer similarly to what appears in the output of 'dmesg' when the MCU firmware is loaded
mt76: mt7603: report firmware version using ethtool
Print fw_ver and build_date members of struct mt7603_fw_trailer similarly to what appears in the output of 'dmesg' when the MCU firmware is loaded.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.0.10, v5.0.9 |
|
#
d422bb26 |
| 18-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: run __mt76_mcu_send_msg in mt7603_mcu_send_firmware
Run __mt76_mcu_send_msg instead of __mt7603_mcu_msg_send and remove duplicated code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kerne
mt76: mt7603: run __mt76_mcu_send_msg in mt7603_mcu_send_firmware
Run __mt76_mcu_send_msg instead of __mt7603_mcu_msg_send and remove duplicated code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.0.8 |
|
#
a4834814 |
| 13-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: init mcu_restart function pointer
Use common function wrapper in mt7603_mcu_exit since the code is shared with mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signe
mt76: mt7603: init mcu_restart function pointer
Use common function wrapper in mt7603_mcu_exit since the code is shared with mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
cc173875 |
| 13-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: initialize mt76_mcu_ops data structure
Use __mt76_mcu_send_msg wrapper instead of mt7603_mcu_msg_send. This is a preliminary patch for mt7615-mt7603 mcu code unification
Signed-off-by
mt76: mt7603: initialize mt76_mcu_ops data structure
Use __mt76_mcu_send_msg wrapper instead of mt7603_mcu_msg_send. This is a preliminary patch for mt7615-mt7603 mcu code unification
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
11ca82d7 |
| 13-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: use standard signature for mt7603_mcu_msg_send
Use mt76 common signature for mt7603_mcu_msg_send. Move skb allocation in mt7603_mcu_msg_send and remove duplicated code. This is a preli
mt76: mt7603: use standard signature for mt7603_mcu_msg_send
Use mt76 common signature for mt7603_mcu_msg_send. Move skb allocation in mt7603_mcu_msg_send and remove duplicated code. This is a preliminary patch for mt7615-mt7603 mcu code unification
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
114fe5e3 |
| 13-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt7603: remove query from mt7603_mcu_msg_send signature
Remove query parameter from mt7603_mcu_msg_send/__mt7603_mcu_msg_send routine signature since it can be obtained from cmd value. This is
mt76: mt7603: remove query from mt7603_mcu_msg_send signature
Remove query parameter from mt7603_mcu_msg_send/__mt7603_mcu_msg_send routine signature since it can be obtained from cmd value. This is a preliminary patch for mcu code unification between mt7615 and mt7603 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3 |
|
#
047348fb |
| 16-Mar-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt7603: remove mt7603_mcu_init routine
Remove mt7603_mcu_init since mcu.mutex has been already initialized in mt76_mmio_init. Run mt7603_load_firmware directly in mt7603_init_hardware
Signed-off-by
mt7603: remove mt7603_mcu_init routine
Remove mt7603_mcu_init since mcu.mutex has been already initialized in mt76_mmio_init. Run mt7603_load_firmware directly in mt7603_init_hardware
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|