wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64

[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ]

We don't actually support >64 even for HE devices, so revert
back to 64. This fixes

wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64

[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ]

We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.

Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64

[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ]

We don't actually support >64 even for HE devices, so revert
back to 64. This fixes

wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64

[ Upstream commit 4a7aace2899711592327463c1a29ffee44fcc66e ]

We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.

Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: iwlwifi: mvm: remove RS rate init update argument

Track instead whether or not the station was authorized, that's
clearer than trying to indicate in the code whether or not the
full bandwidth

wifi: iwlwifi: mvm: remove RS rate init update argument

Track instead whether or not the station was authorized, that's
clearer than trying to indicate in the code whether or not the
full bandwidth should be used via an 'update' argument.

While at it, give rs_fw_rate_init() the iwl_mvm_ prefix.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.92bd8d36e311.I1877a109104d5ffeaaad6a623e89f0c44decc38e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: iwlwifi: mvm: initialize per-link STA ratescale data

When allocating a new link station, initialize the ratescaling
data for it. To do that, refactor the initialization code out
into a new iwl

wifi: iwlwifi: mvm: initialize per-link STA ratescale data

When allocating a new link station, initialize the ratescaling
data for it. To do that, refactor the initialization code out
into a new iwl_mvm_rs_add_sta_link() function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.441b6a8c60fd.I34f1b3555c25aaa22cc34d1112fc3b6393a20b7c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: iwlwifi: mvm: only clients can be 20MHz-only

Since only clients to an AP can be 20MHz-only STAs, adjust the
code to not make the use of EHT capabilities depend on only the
bandwidth, but also

wifi: iwlwifi: mvm: only clients can be 20MHz-only

Since only clients to an AP can be 20MHz-only STAs, adjust the
code to not make the use of EHT capabilities depend on only the
bandwidth, but also the type of interface.

Fixes: 701404f1091d ("wifi: iwlwifi: rs: add support for parsing max MCS per NSS/BW in 11be")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.a3a4c931e4a3.I693a07f4d88044c889eee04793883a83bc5ee362@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta

This field is used only for host TLC, so it can reside inside
the corresponding lq_sta struct. Also, TLC lq_sta is cleared
in iwl_mvm_rs

wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta

This field is used only for host TLC, so it can reside inside
the corresponding lq_sta struct. Also, TLC lq_sta is cleared
in iwl_mvm_rs_rate_init() upon association, but max_agg_bufsize
is set earlier in iwl_mvm_sta_init(). Thus, place this field
in the persistent part of lq_sta to retain its value.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.d55361064e39.Ib79d30f27d94607d097f0192af2aacd455a17958@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: iwlwifi: mvm: adjust rs init to MLO

Rate scale initialization needs some parameters stored
separately for each link. Pass link_conf and link_sta
pointers and adjust the relevant code according

wifi: iwlwifi: mvm: adjust rs init to MLO

Rate scale initialization needs some parameters stored
separately for each link. Pass link_conf and link_sta
pointers and adjust the relevant code accordingly.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.e2f458198844.I98bf3ea807dd8ae8d703915ce9c01e7b7d5ccb42@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

iwlwifi: mvm: Support version 3 of tlc_update_notif.

As part of the new rate_n_flags, a new version of tlc_update_notif
was added in FW in order to support the new rate_n_flags.
Add support for the

iwlwifi: mvm: Support version 3 of tlc_update_notif.

As part of the new rate_n_flags, a new version of tlc_update_notif
was added in FW in order to support the new rate_n_flags.
Add support for the new version, and move the all API to use the
new rate_n_flags only (if FW supports the old one - convert it).

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: remove contact information

The list address is going away, and the postal address isn't
useful, remove all the contact information.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S

iwlwifi: remove contact information

The list address is going away, and the postal address isn't
useful, remove all the contact information.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.f73e3b6384cb.I967fd394995461277eafa149bb25cefd1673751e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: in VHT connection use only VHT capabilities

mac80211 limits amsdu size to the minimum of HT and VHT capabilities
but since in a VHT connection we don't transmit HT frames we can discar

iwlwifi: mvm: in VHT connection use only VHT capabilities

mac80211 limits amsdu size to the minimum of HT and VHT capabilities
but since in a VHT connection we don't transmit HT frames we can discard
HT limits.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

iwlwifi: mvm: remove leftover rs_remove_sta_debugfs() prototype

This prototype is no longer used, remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <lucia

iwlwifi: mvm: remove leftover rs_remove_sta_debugfs() prototype

This prototype is no longer used, remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: replace RS mutex with a spin_lock

The solution with the worker still had a bug, as in order
to get sta, rcu_read_lock should be used and thus no mutex
can be used inside iwl_mvm_rs_rat

iwlwifi: mvm: replace RS mutex with a spin_lock

The solution with the worker still had a bug, as in order
to get sta, rcu_read_lock should be used and thus no mutex
can be used inside iwl_mvm_rs_rate_init.

Also, spin_lock is a simpler solution, no need to spawn a
dedicated worker.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

iwlwifi: mvm: avoid races in rate init and rate perform

Rate perform uses the lq_sta table to calculate the next rate to scale
while rate init resets the same table,

Rate perform is done in soft ir

iwlwifi: mvm: avoid races in rate init and rate perform

Rate perform uses the lq_sta table to calculate the next rate to scale
while rate init resets the same table,

Rate perform is done in soft irq context in parallel to rate init
that can be called in case we are doing changes like AP changes BW
or moving state for auth to assoc.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 322

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of ve

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 322

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details the full gnu general public license is included in
this distribution in the file called license

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 29 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000435.438503728@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

iwlwifi: mvm: always init rs_fw with 20MHz bandwidth rates

As with the non-offloaded rs case, during assoc on the ap side the phy
context is set to 20MHz until authorization of a client that support

iwlwifi: mvm: always init rs_fw with 20MHz bandwidth rates

As with the non-offloaded rs case, during assoc on the ap side the phy
context is set to 20MHz until authorization of a client that supports
wider channel-widths. Support this by sending the initial
tlc_config_cmd with max supported channel width of 20MHz until
authorization succeeds.

Fixes: 6b7a5aea71b3 ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: Send LQ command as async when necessary

The parameter that indicated whether the LQ command should be sent
as sync or async was removed, causing the LQ command to be sent as
sync from

iwlwifi: mvm: Send LQ command as async when necessary

The parameter that indicated whether the LQ command should be sent
as sync or async was removed, causing the LQ command to be sent as
sync from interrupt context (e.g. from the RX path). This resulted
in a kernel warning: "scheduling while atomic" and failing to send
the LQ command, which ultimately leads to a queue hang.

Fix it by adding back the required parameter to send the command as
sync only when it is allowed.

Fixes: d94c5a820d10 ("iwlwifi: mvm: open BA session only when sta is authorized")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: add support for IEEE802.11ax

Add support for the HE in the iwlwifi driver conforming with
P802.11ax_D2.0.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: open BA session only when sta is authorized

Currently, a BA session is opened when the tx traffic exceeds
10 frames per second. As a result of inter-op problems with some
APs, add a co

iwlwifi: mvm: open BA session only when sta is authorized

Currently, a BA session is opened when the tx traffic exceeds
10 frames per second. As a result of inter-op problems with some
APs, add a condition to open BA session only when station is
already authorized.

Fixes: 482e48440a0e ("iwlwifi: mvm: change open and close criteria of a BA session")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: update rs-fw API

Update rs-fw API to match changes in FW. Specifically, the
TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF
notification are removed, the A-MSDU related i

iwlwifi: mvm: update rs-fw API

Update rs-fw API to match changes in FW. Specifically, the
TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF
notification are removed, the A-MSDU related info is received from FW
via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version
2 of its data structure.

Additionally, constify some arguments in a couple of functions.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: support offload of AMSDU rate control

Support the new APIs and activate AMSDU based on the
offloaded TLC decisions.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: L

iwlwifi: mvm: support offload of AMSDU rate control

Support the new APIs and activate AMSDU based on the
offloaded TLC decisions.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: rs: new rate scale API - add FW notifications

This patch sends to the FW notification configuration command and
handles the update responses.

Signed-off-by: Gregory Greenman <gregory.

iwlwifi: mvm: rs: new rate scale API - add FW notifications

This patch sends to the FW notification configuration command and
handles the update responses.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: rs: add basic implementation of the new RS API handlers

This patch adds rate scaling configuration command and
implements a few other handlers.

Signed-off-by: Gregory Greenman <gregor

iwlwifi: mvm: rs: add basic implementation of the new RS API handlers

This patch adds rate scaling configuration command and
implements a few other handlers.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: rs: add ops for the new rate scaling in the FW

This patch introduces a new instance of rate_control_ops for
the new API (adding only empty stubs here and the subsequent
patches in the

iwlwifi: mvm: rs: add ops for the new rate scaling in the FW

This patch introduces a new instance of rate_control_ops for
the new API (adding only empty stubs here and the subsequent
patches in the series will fill in the implementation).
The decision which API to use is done during the register
step according to FW TLV.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: rs: introduce new API for rate scaling

New devices will have rate scaling algorithm running in the firmware.
With this feature, the driver's responsiblity is to provide an initial
conf

iwlwifi: mvm: rs: introduce new API for rate scaling

New devices will have rate scaling algorithm running in the firmware.
With this feature, the driver's responsiblity is to provide an initial
configuration and to handle notifications regarding recent rates and
some other parameters. Debugfs hooks will be still available for
reading the current rate/statistics and setting a fixed rate.
The old API is supported so far, though both APIs cannot be used
simultaneously.

This is the first patch in the series. It adds a new TLV specifying
FW support for the new API and updates lq_sta to support two types
of rate scaling.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: support aggs of 64 frames in A000 family

A SCD bug was fixed in the A000 family, allowing to
support aggregations of 64 frames (rather than 63).

Signed-off-by: Liad Kaufman <liad.kauf

iwlwifi: mvm: support aggs of 64 frames in A000 family

A SCD bug was fixed in the A000 family, allowing to
support aggregations of 64 frames (rather than 63).

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...