wifi: brcmfmac: Check for probe() id argument being NULL

The probe() id argument may be NULL in 2 scenarios:

1. brcmf_pcie_pm_leave_D3() calling brcmf_pcie_probe() to reprobe
the device.

2. If

wifi: brcmfmac: Check for probe() id argument being NULL

The probe() id argument may be NULL in 2 scenarios:

1. brcmf_pcie_pm_leave_D3() calling brcmf_pcie_probe() to reprobe
the device.

2. If a user tries to manually bind the driver from sysfs then the sdio /
pcie / usb probe() function gets called with NULL as id argument.

1. Is being hit by users causing the following oops on resume and causing
wifi to stop working:

BUG: kernel NULL pointer dereference, address: 0000000000000018
<snip>
Hardware name: Dell Inc. XPS 13 9350/0PWNCR, BIDS 1.13.0 02/10/2020
Workgueue: events_unbound async_run_entry_fn
RIP: 0010:brcmf_pcie_probe+Ox16b/0x7a0 [brcmfmac]
<snip>
Call Trace:
<TASK>
brcmf_pcie_pm_leave_D3+0xc5/8x1a0 [brcmfmac be3b4cefca451e190fa35be8f00db1bbec293887]
? pci_pm_resume+0x5b/0xf0
? pci_legacy_resume+0x80/0x80
dpm_run_callback+0x47/0x150
device_resume+0xa2/0x1f0
async_resume+0x1d/0x30
<snip>

Fix this by checking for id being NULL.

In the PCI and USB cases try a manual lookup of the id so that manually
binding the driver through sysfs and more importantly brcmf_pcie_probe()
on resume will work.

For the SDIO case there is no helper to do a manual sdio_device_id lookup,
so just directly error out on a NULL id there.

Fixes: da6d9c8ecd00 ("wifi: brcmfmac: add firmware vendor info in driver info")
Reported-by: Felix <nimrod4garoa@gmail.com>
Link: https://lore.kernel.org/regressions/4ef3f252ff530cbfa336f5a0d80710020fc5cb1e.camel@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230510141856.46532-1-hdegoede@redhat.com

show more ...

wifi: brcmfmac: add Cypress 43439 SDIO ids

Add SDIO ids for use with the muRata 1YN (Cypress CYW43439).
The odd thing about this is that the previous 1YN populated
on M.2 card for evaluation purpose

wifi: brcmfmac: add Cypress 43439 SDIO ids

Add SDIO ids for use with the muRata 1YN (Cypress CYW43439).
The odd thing about this is that the previous 1YN populated
on M.2 card for evaluation purposes had BRCM SDIO vendor ID,
while the chip populated on real hardware has a Cypress one.
The device ID also differs between the two devices. But they
are both 43439 otherwise, so add the IDs for both.

On-device 1YN (43439), the new one, chip label reads "1YN":
```
/sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device
0x04b4
0xbd3d
```

EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4":
```
/sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device
0x02d0
0xa9a6
```

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de

show more ...

wifi: brcmfmac: Fix SDIO suspend/resume regression

After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on suspend

wifi: brcmfmac: Fix SDIO suspend/resume regression

After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on suspend
and then re-probed on resume.

In at least 2 model x86/acpi tablets with brcmfmac43430a1 wifi adapters,
the newly added re-probe on resume fails like this:

brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed

It seems this specific brcmfmac model does not like being reprobed without
it actually being turned off first.

And the adapter is not being turned off during suspend because of
commit f0992ace680c ("brcmfmac: prohibit ACPI power management for brcmfmac
driver").

Now that the driver is being reprobed on resume, the disabling of ACPI
pm is no longer necessary, except when WOWL is used (in which case there
is no-reprobe).

Move the dis-/en-abling of ACPI pm to brcmf_sdio_wowl_config(), this fixes
the brcmfmac43430a1 suspend/resume regression and should help save some
power when suspended.

This change means that the code now also may re-enable ACPI pm when WOWL
gets disabled. ACPI pm should only be re-enabled if it was enabled by
the ACPI core originally. Add a brcmf_sdiod_acpi_save_power_manageable()
to save the original state for this.

This has been tested on the following devices:

Asus T100TA brcmfmac43241b4-sdio
Acer Iconia One 7 B1-750 brcmfmac43340-sdio
Chuwi Hi8 brcmfmac43430a0-sdio
Chuwi Hi8 brcmfmac43430a1-sdio

(the Asus T100TA is the device for which the prohibiting of ACPI pm
was originally added)

Fixes: 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card unless WOWL is used")
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320122252.240070-1-hdegoede@redhat.com

show more ...

wifi: brcmfmac: add support for Cypress firmware api

Cypress uses the brcmfmac driver and releases firmware which will
likely diverge over time (or already has). So adding support for
handling that.

wifi: brcmfmac: add support for Cypress firmware api

Cypress uses the brcmfmac driver and releases firmware which will
likely diverge over time (or already has). So adding support for
handling that.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129135446.151065-5-arend.vanspriel@broadcom.com

show more ...

wifi: brcmfmac: add firmware vendor info in driver info

In order to determine the vendor that released a firmware image for
a specific device, the device table now sets the vendor identifier
in driv

wifi: brcmfmac: add firmware vendor info in driver info

In order to determine the vendor that released a firmware image for
a specific device, the device table now sets the vendor identifier
in driver info and it is stored in struct brcmf_bus::fwvid during
probe.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129135446.151065-3-arend.vanspriel@broadcom.com

show more ...

wifi: brcmfmac: add 43439 SDIO ids and initialization

Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
Add the firmware mapping structures for the CYW43439 chipset.
The 43439 need

wifi: brcmfmac: add 43439 SDIO ids and initialization

Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
Add the firmware mapping structures for the CYW43439 chipset.
The 43439 needs some things setup similar to the 43430 chipset.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220827024903.617294-1-marex@denx.de

show more ...

wifi: brcmfmac: prevent double-free on hardware-reset

In case of buggy firmware, brcmfmac may perform a hardware reset. If during
reset and subsequent probing an early failure occurs, a memory regio

wifi: brcmfmac: prevent double-free on hardware-reset

In case of buggy firmware, brcmfmac may perform a hardware reset. If during
reset and subsequent probing an early failure occurs, a memory region is
accidentally double-freed. With hardened memory allocation enabled, this error
will be detected.

- return early where appropriate to skip unnecessary clean-up.
- set '.freezer' pointer to NULL to prevent double-freeing under possible
other circumstances and to re-align result under various different
behaviors of memory allocation freeing.
- correctly claim host on func1 for disabling func2.
- after reset, do not initiate probing immediately, but rely on events.

Given a firmware crash, function 'brcmf_sdio_bus_reset' is called. It calls
'brcmf_sdiod_remove', then follows up with 'brcmf_sdiod_probe' to reinitialize
the hardware. If 'brcmf_sdiod_probe' fails to "set F1 blocksize", it exits
early, which includes calling 'brcmf_sdiod_remove'. In both cases
'brcmf_sdiod_freezer_detach' is called to free allocated '.freezer', which
has not yet been re-allocated the second time.

Stacktrace of (failing) hardware reset after firmware-crash:

Code: b9402b82 8b0202c0 eb1a02df 54000041 (d4210000)
ret_from_fork+0x10/0x20
kthread+0x154/0x160
worker_thread+0x188/0x504
process_one_work+0x1f4/0x490
brcmf_core_bus_reset+0x34/0x44 [brcmfmac]
brcmf_sdio_bus_reset+0x68/0xc0 [brcmfmac]
brcmf_sdiod_probe+0x170/0x21c [brcmfmac]
brcmf_sdiod_remove+0x48/0xc0 [brcmfmac]
kfree+0x210/0x220
__slab_free+0x58/0x40c
Call trace:
x2 : 0000000000000040 x1 : fffffc00002d2b80 x0 : ffff00000b4aee40
x5 : ffff8000013fa728 x4 : 0000000000000001 x3 : ffff00000b4aee00
x8 : ffff800009967ce0 x7 : ffff8000099bfce0 x6 : 00000006f8005d01
x11: ffff8000099bfce0 x10: 00000000fffff000 x9 : ffff8000083401d0
x14: 0000000000000000 x13: 657a69736b636f6c x12: 6220314620746573
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000030
x20: fffffc00002d2ba0 x19: fffffc00002d2b80 x18: 0000000000000000
x23: ffff00000b4aee00 x22: ffff00000b4aee00 x21: 0000000000000001
x26: ffff00000b4aee00 x25: ffff0000f7753705 x24: 000000000001288a
x29: ffff80000a22bbf0 x28: ffff000000401200 x27: 000000008020001a
sp : ffff80000a22bbf0
lr : kfree+0x210/0x220
pc : __slab_free+0x58/0x40c
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
Workqueue: events brcmf_core_bus_reset [brcmfmac]
Hardware name: Pine64 Pinebook Pro (DT)
CPU: 2 PID: 639 Comm: kworker/2:2 Tainted: G C 5.16.0-0.bpo.4-arm64 #1 Debian 5.16.12-1~bpo11+1
nvmem_rockchip_efuse industrialio_triggered_buffer videodev snd_soc_core snd_pcm_dmaengine kfifo_buf snd_pcm io_domain mc industrialio mt>
Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reje>
Internal error: Oops - BUG: 0 [#1] SMP
kernel BUG at mm/slub.c:379!

Signed-off-by: Danny van Heumen <danny@dannyvanheumen.nl>
Reviewed-by: Arend van Spriel <aspriel.gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/id1HN6qCMAirApBzTA6fT7ZFWBBGCJhULpflxQ7NT6cgCboVnn3RHpiOFjA9SbRqzBRFLk9ES0C4FNvO6fUQsNg7pqF6ZSNAYUo99nHy8PY=@dannyvanheumen.nl

show more ...

wifi: brcmfmac: Remove #ifdef guards for PM related functions

Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.

These macros allow the suspe

wifi: brcmfmac: Remove #ifdef guards for PM related functions

Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

Some other functions not directly called by the .suspend/.resume
callbacks, but still related to PM were also taken outside #ifdef
guards.

The advantage is then that these functions are now always compiled
independently of any Kconfig option, and thanks to that bugs and
regressions are easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220627193701.31074-1-paul@crapouillou.net

show more ...

brcmfmac: Avoid keeping power to SDIO card unless WOWL is used

Keeping the power to the SDIO card during system wide suspend, consumes
energy. Especially on battery driven embedded systems, this can

brcmfmac: Avoid keeping power to SDIO card unless WOWL is used

Keeping the power to the SDIO card during system wide suspend, consumes
energy. Especially on battery driven embedded systems, this can be a
problem. Therefore, let's change the behaviour into allowing the SDIO card
to be powered off, unless WOWL is supported and enabled.

Note that, the downside from this change, is that during system resume the
SDIO card needs to be re-initialized and the FW must be re-programmed. Even
if this may take some time to complete, it should we worth it, rather than
draining the battery.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220323083950.414783-1-ulf.hansson@linaro.org

show more ...

brcmfmac: add 43752 SDIO ids and initialization

Add HW and SDIO ids for use with the SparkLan AP6275S
Add the firmware mapping structures for the BRCM43752 chipset.
The 43752 needs some things setup

brcmfmac: add 43752 SDIO ids and initialization

Add HW and SDIO ids for use with the SparkLan AP6275S
Add the firmware mapping structures for the BRCM43752 chipset.
The 43752 needs some things setup similar to the 43012 chipset.
The WATERMARK shows better performance when initialized to the 4373 value.

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca

show more ...

brcmfmac: support chipsets with different core enumeration space

Historically the broadcom wifi chipsets always had enumeration
space containing all core information at same place. However, for
new

brcmfmac: support chipsets with different core enumeration space

Historically the broadcom wifi chipsets always had enumeration
space containing all core information at same place. However, for
new chipsets the ASIC developers moved away from that given fact.
So we have to accommodate that it can differ per chipset.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1627505434-9544-5-git-send-email-arend.vanspriel@broadcom.com

show more ...

brcmfmac: properly check for bus register errors

The brcmfmac driver ignores any errors on initialization with the
different busses by deferring the initialization to a workqueue and
ignoring all po

brcmfmac: properly check for bus register errors

The brcmfmac driver ignores any errors on initialization with the
different busses by deferring the initialization to a workqueue and
ignoring all possible errors that might happen. Fix up all of this by
only allowing the module to load if all bus registering worked properly.

Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'

Fixes the following W=1 kernel build warning(s):

drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Function

brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'

Fixes the following W=1 kernel build warning(s):

drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Function parameter or member 'pktlist' not described in 'brcmf_sdiod_sglist_rw'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Excess function parameter 'pkt' description in 'brcmf_sdiod_sglist_rw'

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201102112410.1049272-7-lee.jones@linaro.org

show more ...

brcmfmac: properly check for bus register errors

[ Upstream commit 419b4a142a7ece36cebcd434f8ce2af59ef94b85 ]

The brcmfmac driver ignores any errors on initialization with the
different busses by d

brcmfmac: properly check for bus register errors

[ Upstream commit 419b4a142a7ece36cebcd434f8ce2af59ef94b85 ]

The brcmfmac driver ignores any errors on initialization with the
different busses by deferring the initialization to a workqueue and
ignoring all possible errors that might happen. Fix up all of this by
only allowing the module to load if all bus registering worked properly.

Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: brcmfmac: Replace in_interrupt()

brcmf_sdio_isr() is using in_interrupt() to distinguish if it is called
from a interrupt service routine or from a worker thread.

Passing such information from

net: brcmfmac: Replace in_interrupt()

brcmf_sdio_isr() is using in_interrupt() to distinguish if it is called
from a interrupt service routine or from a worker thread.

Passing such information from the calling context is preferred and
requested by Linus, so add an argument `in_isr' to brcmf_sdio_isr() and let
the callers pass the information about the calling context.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

brcmfmac: set F2 SDIO block size to 128 bytes for BCM4329

Setting F2 block size to 128 bytes for BCM4329 allows to significantly
improve RX throughput on NVIDIA Tegra20. Before this change the throu

brcmfmac: set F2 SDIO block size to 128 bytes for BCM4329

Setting F2 block size to 128 bytes for BCM4329 allows to significantly
improve RX throughput on NVIDIA Tegra20. Before this change the throughput
was capped to 30 Mbit/s on Tegra, now throughput is at 40 Mbit/s, which is
a maximum throughput for the BCM4329 chip. The F2 block size is borrowed
from the downstream BCMDHD driver. The comment in the BCMDHD driver says
that 128B improves throughput and turns out that it works for the brcmfmac
as well.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200830191439.10017-4-digetx@gmail.com

show more ...

brcmfmac: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through mar

brcmfmac: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821063758.GA17783@embeddedor

show more ...

brcmfmac: reset SDIO bus on a firmware crash

commit 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
adds a reset function to recover firmware trap for PCIe bus. This commit
adds an imp

brcmfmac: reset SDIO bus on a firmware crash

commit 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
adds a reset function to recover firmware trap for PCIe bus. This commit
adds an implementation for SDIO bus.

Upon SDIO firmware trap, do below:
- Remove the device
- Reset hardware
- Probe the device again

Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200622144851.165248-1-chi-hsien.lin@cypress.com

show more ...

brcmfmac: set F2 blocksize and watermark for 4354/4356 SDIO

Set F2 blocksize to 256 bytes and watermark to 0x40 for 4354/4356 SDIO.
Also enable and configure F1 MesBusyCtrl. It would resolve random

brcmfmac: set F2 blocksize and watermark for 4354/4356 SDIO

Set F2 blocksize to 256 bytes and watermark to 0x40 for 4354/4356 SDIO.
Also enable and configure F1 MesBusyCtrl. It would resolve random driver
crash issue.

Signed-off-by: Frank Kao <frank.kao@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-4-chi-hsien.lin@cypress.com

show more ...

brcmfmac: set F2 blocksize for 4373

Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having
UDP bi-directional traffic. Also use a defined F1 MesBusyCtrl value.

Signed-off-by: Wrigh

brcmfmac: set F2 blocksize for 4373

Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having
UDP bi-directional traffic. Also use a defined F1 MesBusyCtrl value.

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-2-chi-hsien.lin@cypress.com

show more ...

mmc: sdio: Fix Cypress SDIO IDs macros in common include file

All macro names for SDIO device IDs are prefixed by vendor name to which
device ID belongs. So for consistency add Broadcom string vendo

mmc: sdio: Fix Cypress SDIO IDs macros in common include file

All macro names for SDIO device IDs are prefixed by vendor name to which
device ID belongs. So for consistency add Broadcom string vendor prefix to
all Cypress macro names as they belong to SDIO Broadcom vendor ID.

Change also Cypress 43012 value from decimal do hexadecimal notation to be
consistent with all other values.

Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200522144412.19712-11-pali@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

brcmfmac: remove leading space

Signed-off-by: Nils ANDRÉ-CHANG <nils@nilsand.re>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200412171900.xzedxhzd56gox5kf@nixos

brcmfmac: Keep OOB wake-interrupt disabled when it shouldn't be enabled

NVIDIA Tegra SoCs do not like when OOB wake is enabled and WiFi interface
is in DOWN state during suspend. This results in a C

brcmfmac: Keep OOB wake-interrupt disabled when it shouldn't be enabled

NVIDIA Tegra SoCs do not like when OOB wake is enabled and WiFi interface
is in DOWN state during suspend. This results in a CPU hang on programming
OOB wake-up state of the GPIO controller during of system's suspend.

The solution is trivial: don't enable wake for the OOB interrupt when it
should be disabled.

This fixes hang on Tegra20 (Acer A500) and Tegra30 (Nexus 7) devices which
are using BCM4329 and BCM4330 WiFi chips respectively.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

brcmfmac: add support for BCM4359 SDIO chipset

BCM4359 is a 2x2 802.11 abgn+ac Dual-Band HT80 combo chip and it
supports Real Simultaneous Dual Band feature.

Based on a similar patch by: Wright Fen

brcmfmac: add support for BCM4359 SDIO chipset

BCM4359 is a 2x2 802.11 abgn+ac Dual-Band HT80 combo chip and it
supports Real Simultaneous Dual Band feature.

Based on a similar patch by: Wright Feng <wright.feng@cypress.com>

Signed-off-by: Soeren Moch <smoch@web.de>
Acked-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

brcmfmac: set F2 blocksize and watermark for 4359

Set F2 blocksize to 256 bytes and watermark to 0x40 for 4359. Also
enable and configure F1 MesBusyCtrl. It fixes DMA error while having
UDP bi-direc

brcmfmac: set F2 blocksize and watermark for 4359

Set F2 blocksize to 256 bytes and watermark to 0x40 for 4359. Also
enable and configure F1 MesBusyCtrl. It fixes DMA error while having
UDP bi-directional traffic.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
[slightly adapted for rebase on mainline linux]
Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...