wifi: ath11k: decrease MHI channel buffer length to 8KB

[ Upstream commit 1cca1bddf9ef080503c15378cecf4877f7510015 ]

Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
with 0, making

wifi: ath11k: decrease MHI channel buffer length to 8KB

[ Upstream commit 1cca1bddf9ef080503c15378cecf4877f7510015 ]

Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
with 0, making MHI use a default size, 64KB, to allocate channel
buffers. This is likely to fail in some scenarios where system
memory is highly fragmented and memory compaction or reclaim is
not allowed.

There is a fail report which is caused by it:
kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb
Workqueue: events_unbound async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x60
warn_alloc+0x13a/0x1b0
? srso_alias_return_thunk+0x5/0xfbef5
? __alloc_pages_direct_compact+0xab/0x210
__alloc_pages_slowpath.constprop.0+0xd3e/0xda0
__alloc_pages+0x32d/0x350
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__kmalloc_large_node+0x72/0x110
__kmalloc+0x37c/0x480
? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
device_for_each_child+0x5c/0xa0
? __pfx_pci_pm_resume+0x10/0x10
ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e]
? srso_alias_return_thunk+0x5/0xfbef5
ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec]
? srso_alias_return_thunk+0x5/0xfbef5
dpm_run_callback+0x8c/0x1e0
device_resume+0x104/0x340
? __pfx_dpm_watchdog_handler+0x10/0x10
async_resume+0x1d/0x30
async_run_entry_fn+0x32/0x120
process_one_work+0x168/0x330
worker_thread+0x2f5/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe8/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>

Actually those buffers are used only by QMI target -> host communication.
And for WCN6855 and QCA6390, the largest packet size for that is less
than 6KB. So change buf_len field to 8KB, which results in order 1
allocation if page size is 4KB. In this way, we can at least save some
memory, and as well as decrease the possibility of allocation failure
in those scenarios.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Reported-by: Vlastimil Babka <vbabka@suse.cz>
Closes: https://lore.kernel.org/ath11k/96481a45-3547-4d23-ad34-3a8f1d90c1cd@suse.cz/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240223053111.29170-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath11k: decrease MHI channel buffer length to 8KB

[ Upstream commit 1cca1bddf9ef080503c15378cecf4877f7510015 ]

Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
with 0, making

wifi: ath11k: decrease MHI channel buffer length to 8KB

[ Upstream commit 1cca1bddf9ef080503c15378cecf4877f7510015 ]

Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
with 0, making MHI use a default size, 64KB, to allocate channel
buffers. This is likely to fail in some scenarios where system
memory is highly fragmented and memory compaction or reclaim is
not allowed.

There is a fail report which is caused by it:
kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb
Workqueue: events_unbound async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x60
warn_alloc+0x13a/0x1b0
? srso_alias_return_thunk+0x5/0xfbef5
? __alloc_pages_direct_compact+0xab/0x210
__alloc_pages_slowpath.constprop.0+0xd3e/0xda0
__alloc_pages+0x32d/0x350
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__kmalloc_large_node+0x72/0x110
__kmalloc+0x37c/0x480
? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
device_for_each_child+0x5c/0xa0
? __pfx_pci_pm_resume+0x10/0x10
ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e]
? srso_alias_return_thunk+0x5/0xfbef5
ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec]
? srso_alias_return_thunk+0x5/0xfbef5
dpm_run_callback+0x8c/0x1e0
device_resume+0x104/0x340
? __pfx_dpm_watchdog_handler+0x10/0x10
async_resume+0x1d/0x30
async_run_entry_fn+0x32/0x120
process_one_work+0x168/0x330
worker_thread+0x2f5/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe8/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>

Actually those buffers are used only by QMI target -> host communication.
And for WCN6855 and QCA6390, the largest packet size for that is less
than 6KB. So change buf_len field to 8KB, which results in order 1
allocation if page size is 4KB. In this way, we can at least save some
memory, and as well as decrease the possibility of allocation failure
in those scenarios.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Reported-by: Vlastimil Babka <vbabka@suse.cz>
Closes: https://lore.kernel.org/ath11k/96481a45-3547-4d23-ad34-3a8f1d90c1cd@suse.cz/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240223053111.29170-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath11k: pci: cleanup debug logging

For better readability fix PCI debug messages to follow the preferred style.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-

wifi: ath11k: pci: cleanup debug logging

For better readability fix PCI debug messages to follow the preferred style.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-10-kvalo@kernel.org

show more ...

wifi: ath11k: remove manual mask names from debug messages

Now that the previous patch changed ath11k_dbg() to print the debug level
there's no need to have the level in the actual message anymore.

wifi: ath11k: remove manual mask names from debug messages

Now that the previous patch changed ath11k_dbg() to print the debug level
there's no need to have the level in the actual message anymore. So remove those.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-4-kvalo@kernel.org

show more ...

wifi: ath11k: reduce the MHI timeout to 20s

Currently ath11k breaks after hibernation, the reason being that ath11k expects
that the wireless device will have power during suspend and the firmware w

wifi: ath11k: reduce the MHI timeout to 20s

Currently ath11k breaks after hibernation, the reason being that ath11k expects
that the wireless device will have power during suspend and the firmware will
continue running. But of course during hibernation the power from the device is
cut off and firmware is not running when resuming, so ath11k will fail.

(The reason why ath11k needs the firmware running is the interaction between
mac80211 and MHI stack, it's a long story and more info in the bugzilla report.)

In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds:

CONFIG_DPM_WATCHDOG_TIMEOUT=60

But as the ath11k MHI timeout is 90 seconds the kernel will crash before will
ath11k will recover in resume callback. To avoid the crash reduce the MHI
timeout to just 20 seconds.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214649
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230329162038.8637-1-kvalo@kernel.org

show more ...

wifi: ath11k: mhi: fix potential memory leak in ath11k_mhi_register()

mhi_alloc_controller() allocates a memory space for mhi_ctrl. When gets
some error, mhi_ctrl should be freed with mhi_free_contr

wifi: ath11k: mhi: fix potential memory leak in ath11k_mhi_register()

mhi_alloc_controller() allocates a memory space for mhi_ctrl. When gets
some error, mhi_ctrl should be freed with mhi_free_controller(). But
when ath11k_mhi_read_addr_from_dt() fails, the function returns without
calling mhi_free_controller(), which will lead to a memory leak.

We can fix it by calling mhi_free_controller() when
ath11k_mhi_read_addr_from_dt() fails.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220907073704.58806-1-niejianglei2021@163.com

show more ...

ath11k: mhi: remove unnecessary goto from ath11k_mhi_start()

No need to have goto for a return statement, so simplify the code. While at it,
print warning messages if power up calls fail.

No functi

ath11k: mhi: remove unnecessary goto from ath11k_mhi_start()

No need to have goto for a return statement, so simplify the code. While at it,
print warning messages if power up calls fail.

No functional changes.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220401173042.17467-4-kvalo@kernel.org

show more ...

ath11k: mhi: add error handling for suspend and resume

While reviewing the mhi.c I noticed we were just ignoring the errors coming
from MHI subsystem during suspend and resume. Add proper checks and

ath11k: mhi: add error handling for suspend and resume

While reviewing the mhi.c I noticed we were just ignoring the errors coming
from MHI subsystem during suspend and resume. Add proper checks and warning
messages. Also pass the error value to callers.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220401173042.17467-3-kvalo@kernel.org

show more ...

ath11k: mhi: remove state machine

State machines are difficult to understand and in this case it's just useless,
which is shown by the diffstat. So remove it entirely to make the code simpler.

No f

ath11k: mhi: remove state machine

State machines are difficult to understand and in this case it's just useless,
which is shown by the diffstat. So remove it entirely to make the code simpler.

No functional changes.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220401173042.17467-2-kvalo@kernel.org

show more ...

ath11k: Remove core PCI references from PCI common code

Remove core PCI and ath11k PCI references(struct ath11k_pci)
from PCI common code. Since, PCI common code will be used
by hybrid bus devices,

ath11k: Remove core PCI references from PCI common code

Remove core PCI and ath11k PCI references(struct ath11k_pci)
from PCI common code. Since, PCI common code will be used
by hybrid bus devices, this code should be independent
from ATH11K PCI references and Linux core PCI references
like struct pci_dev.

Since this change introduces function callbacks for bus wakeup
and bus release operations, wakeup_mhi HW param is no longer
needed and hence it is removed completely. Alternatively, bus
wakeup/release ops for QCA9074 are initialized to NULL as
QCA9704 does not need bus wakeup/release for register accesses.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328055714.6449-6-quic_mpubbise@quicinc.com

show more ...

ath11k: Refactor MSI logic to support WCN6750

Refactor MSI logic in order to support hybrid bus devices
like WCN6750.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LIT

ath11k: Refactor MSI logic to support WCN6750

Refactor MSI logic in order to support hybrid bus devices
like WCN6750.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328055714.6449-5-quic_mpubbise@quicinc.com

show more ...

ath11k: Refactor PCI code to support WCN6750

Unlike other ATH11K PCIe devices which are enumerated by APSS
processor (Application Processor SubSystem), WCN6750 gets
enumerated by the WPSS Q6 process

ath11k: Refactor PCI code to support WCN6750

Unlike other ATH11K PCIe devices which are enumerated by APSS
processor (Application Processor SubSystem), WCN6750 gets
enumerated by the WPSS Q6 processor (Wireless Processor SubSystem);
In simple terms, though WCN6750 is PCIe device, it is not attached
to the APSS processor, APSS will not know of such a device being
present in the system and therefore WCN6750 will be registered as
a platform device to the kernel core like other supported AHB
devices.

WCN6750 needs both AHB and PCI APIs for it's operation, it uses
AHB APIs for device probe/boot and PCI APIs for device setup and
register accesses. Because of this nature, it is referred as a
hybrid bus device.

Refactor PCI code to support hybrid bus devices like WCN6750.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328055714.6449-3-quic_mpubbise@quicinc.com

show more ...

ath11k: add support for device recovery for QCA6390/WCN6855

Currently ath11k has device recovery logic, it is introduced by this
patch "ath11k: Add support for subsystem recovery" which is upstream

ath11k: add support for device recovery for QCA6390/WCN6855

Currently ath11k has device recovery logic, it is introduced by this
patch "ath11k: Add support for subsystem recovery" which is upstream
by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad.

The patch is for AHB devices such as IPQ8074, it has remote proc module
which is used to download the firmware and boots the processor which
firmware is running on. If firmware crashed, remote proc module will
detect it and download and boot firmware again. Below command will
trigger a firmware crash, and then user can test feature of device
recovery.

Test command:
echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash
echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash

Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc
module, it use mhi module to communicate between firmware and ath11k.
So ath11k does not support device recovery for QCA6390 currently.

This patch is to add the extra logic which is different for QCA6390.
When firmware crashed, MHI_CB_EE_RDDM event will be indicate by
firmware and then ath11k_mhi_op_status_cb which is the callback of
mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k
will start to do recovery process, ath11k_core_reset() calls
ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k
will start to download and boot firmware. There are some logic to
avoid deadloop recovery and two simultaneous recovery operations.
And because it has muti-radios for the soc, so it add some logic
in ath11k_mac_op_reconfig_complete() to make sure all radios has
reconfig complete and then complete the device recovery.

Also it add workqueue_aux, because ab->workqueue is used when receive
ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue,
&ab->restart_work)), and ath11k_core_reset will wait for max
ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if
ath11k_core_reset also queued in ab->workqueue, then it will delay
restart_work of previous recovery and lead previous recovery fail.

ath11k recovery success for QCA6390/WCN6855 after apply this patch.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com

show more ...

ath11k: configure RDDM size to mhi for recovery by firmware

The rddm_size is needed by firmware while mhi enter RDDM state, add it
to support recovery when ath11k receive MHI_CB_EE_RDDM message.

Te

ath11k: configure RDDM size to mhi for recovery by firmware

The rddm_size is needed by firmware while mhi enter RDDM state, add it
to support recovery when ath11k receive MHI_CB_EE_RDDM message.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220209060012.32478-4-quic_wgong@quicinc.com

show more ...

ath11k: mhi: use mhi_sync_power_up()

If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any er

ath11k: mhi: use mhi_sync_power_up()

If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.

I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.

[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org

show more ...

ath11k: add missing of_node_put() to avoid leak

The node pointer is returned by of_find_node_by_type()
or of_parse_phandle() with refcount incremented. Calling
of_node_put() to aovid the refcount le

ath11k: add missing of_node_put() to avoid leak

The node pointer is returned by of_find_node_by_type()
or of_parse_phandle() with refcount incremented. Calling
of_node_put() to aovid the refcount leak.

Fixes: 6ac04bdc5edb ("ath11k: Use reserved host DDR addresses from DT for PCI devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211221114003.335557-1-yangyingliang@huawei.com

show more ...

ath11k: Use reserved host DDR addresses from DT for PCI devices

Host DDR memory (contiguous 45 MB in mode-0 or 15 MB in mode-2)
is reserved through DT entries for firmware usage. Send the base
addre

ath11k: Use reserved host DDR addresses from DT for PCI devices

Host DDR memory (contiguous 45 MB in mode-0 or 15 MB in mode-2)
is reserved through DT entries for firmware usage. Send the base
address from DT entries.
If DT entry is available, PCI device will work with
fixed_mem_region else host allocates multiple segments.

IPQ8074 on HK10 board supports multiple PCI devices.
IPQ8074 + QCN9074 is tested with this patch.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1638789319-2950-2-git-send-email-akolli@codeaurora.org

show more ...

bus: mhi: core: Add support for forced PM resume

For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state during PM resume, but still functional. The
mhi_pm_resume sh

bus: mhi: core: Add support for forced PM resume

For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state during PM resume, but still functional. The
mhi_pm_resume should then not fail in those cases, and let the higher
level device specific stack continue resuming process.

Add an API mhi_pm_resume_force(), to force resuming irrespective of the
current MHI state. This fixes a regression with non functional ath11k WiFi
after suspend/resume cycle on some machines.

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179

Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/
Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state")
Cc: stable@vger.kernel.org #5.13
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[mani: Switched to API, added bug report, reported-by tags and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ath11k: add support for WCN6855 hw2.1

Ath11k fails to probe WCN6855 hw2.1 chip:

[ 6.983821] ath11k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 6.983841] ath11k_pci 0000:06:00.0: Unsupported

ath11k: add support for WCN6855 hw2.1

Ath11k fails to probe WCN6855 hw2.1 chip:

[ 6.983821] ath11k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 6.983841] ath11k_pci 0000:06:00.0: Unsupported WCN6855 SOC hardware version: 18 17

This is caused by the wrong bit mask setting of hardware major version:
for QCA6390/QCN6855, it should be BIT8-11, not BIT8-16, so change the
definition to GENMASK(11, 8).

Also, add a separate entry for WCN6855 hw2.1 in ath11k_hw_params.

Please note that currently WCN6855 hw2.1 shares the same firmwares
as hw2.0, so users of this chip need to create a symlink as below:

ln -s hw2.0 hw2.1

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Fixes: 18ac1665e785 ("ath11k: pci: check TCSR_SOC_HW_VERSION")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211129025613.21594-1-quic_bqiang@quicinc.com

show more ...

ath11k: add support one MSI vector

On some platforms it's not possible to allocate 32 MSI vectors for various
reasons, be it kernel configuration, VT-d disabled, buggy BIOS etc. So
ath11k was not ab

ath11k: add support one MSI vector

On some platforms it's not possible to allocate 32 MSI vectors for various
reasons, be it kernel configuration, VT-d disabled, buggy BIOS etc. So
ath11k was not able to use QCA6390 PCI devices on those platforms. Add
support for one MSI vector to solve that.

In case of one MSI vector, interrupt migration needs to be disabled. This
is because when interrupt migration happens, the msi_data may change.
However, msi_data is already programmed to rings during initial phase and
ath11k has no way to know that msi_data is changed during run time and
reprogram again.

In case of one MSI vector, MHI subsystem should not use IRQF_NO_SUSPEND
as QCA6390 doesn't set this flag too. Ath11k doesn't need to leave
IRQ enabled in suspend state.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Link: https://lore.kernel.org/r/20211026041714.5219-1-bqiang@codeaurora.org

show more ...

ath11k: mhi: use mhi_sync_power_up()

[ Upstream commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d ]

If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that

ath11k: mhi: use mhi_sync_power_up()

[ Upstream commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d ]

If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.

I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.

[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

bus: mhi: core: Add support for forced PM resume

commit cab2d3fd6866e089b5c50db09dece131f85bfebd upstream.

For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state d

bus: mhi: core: Add support for forced PM resume

commit cab2d3fd6866e089b5c50db09dece131f85bfebd upstream.

For whatever reason, some devices like QCA6390, WCN6855 using ath11k
are not in M3 state during PM resume, but still functional. The
mhi_pm_resume should then not fail in those cases, and let the higher
level device specific stack continue resuming process.

Add an API mhi_pm_resume_force(), to force resuming irrespective of the
current MHI state. This fixes a regression with non functional ath11k WiFi
after suspend/resume cycle on some machines.

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179

Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/
Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state")
Cc: stable@vger.kernel.org #5.13
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[mani: Switched to API, added bug report, reported-by tags and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ath11k: set register access length for MHI driver

MHI driver requires register space length to add range checks and
prevent memory region accesses outside of that for MMIO space.
Set it before regis

ath11k: set register access length for MHI driver

MHI driver requires register space length to add range checks and
prevent memory region accesses outside of that for MMIO space.
Set it before registering the MHI controller.

Link: https://lore.kernel.org/r/1620330705-40192-5-git-send-email-bbhatt@codeaurora.org
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210802051255.5771-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ath11k: add support for WCN6855

This patch is to add support for WCN6855. For station mode,
WCN6855 is able to connect to an AP, and ping works well.
For AP mode, hostapd is able to bringup an SAP i

ath11k: add support for WCN6855

This patch is to add support for WCN6855. For station mode,
WCN6855 is able to connect to an AP, and ping works well.
For AP mode, hostapd is able to bringup an SAP interface with
WCN6855, a normal station can connect to this AP and
ping works well.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-7-jouni@codeaurora.org

show more ...

ath11k: fix warning in ath11k_mhi_config

Initialize static variable ath11k_mhi_config for all hw_rev,
return error for unknown hw_rev.
This patch fixes below Smatch warning:
drivers/net/wireless

ath11k: fix warning in ath11k_mhi_config

Initialize static variable ath11k_mhi_config for all hw_rev,
return error for unknown hw_rev.
This patch fixes below Smatch warning:
drivers/net/wireless/ath/ath11k/mhi.c:357 ath11k_mhi_register()
error: uninitialized symbol 'ath11k_mhi_config'.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1

Fixes: a233811ef600 ("ath11k: Add qcn9074 mhi controller config")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1617857830-19315-1-git-send-email-akolli@codeaurora.org

show more ...