wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready me

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready me

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready me

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready me

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready me

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready me

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready me

wifi: ath10k: poll service ready message before failing

[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]

Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:

[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110

And finally it causes WLAN interface bring up failure.

Change to give it one more chance here by polling CE rings,
before failing directly.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath10k: Use list_count_nodes()

ath10k_wmi_fw_stats_num_peers() and ath10k_wmi_fw_stats_num_vdevs() really
look the same as list_count_nodes(), so use the latter instead of hand
writing it.

Th

wifi: ath10k: Use list_count_nodes()

ath10k_wmi_fw_stats_num_peers() and ath10k_wmi_fw_stats_num_vdevs() really
look the same as list_count_nodes(), so use the latter instead of hand
writing it.

The first ones use list_for_each_entry() and the other list_for_each(), but
they both count the number of nodes in the list.

Compile tested only.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/e6ec525c0c5057e97e33a63f8a4aa482e5c2da7f.1682541872.git.christophe.jaillet@wanadoo.fr

show more ...

wifi: ath10k: Fix miscellaneous spelling errors

Fix misspellings flagged by 'codespell'.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
L

wifi: ath10k: Fix miscellaneous spelling errors

Fix misspellings flagged by 'codespell'.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220909145300.19223-1-quic_jjohnson@quicinc.com

show more ...

wifi: mac80211: return a beacon for a specific link

Pass the link id through to the get_beacon and return
the beacon for a specific link id.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>

wifi: mac80211: return a beacon for a specific link

Pass the link id through to the get_beacon and return
the beacon for a specific link id.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: move some future per-link data to bss_conf

To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.

Most transformatio

wifi: mac80211: move some future per-link data to bss_conf

To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.

Most transformations were done with the following spatch:

@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var

@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Revert "ath10k: drop beacon and probe response which leak from other channel"

This reverts commit 3bf2537ec2e33310b431b53fd84be8833736c256.

I was reported privately that this commit breaks AP and m

Revert "ath10k: drop beacon and probe response which leak from other channel"

This reverts commit 3bf2537ec2e33310b431b53fd84be8833736c256.

I was reported privately that this commit breaks AP and mesh mode on QCA9984
(firmware 10.4-3.9.0.2-00156). So revert the commit to fix the regression.

There was a conflict due to cfg80211 API changes but that was easy to fix.

Fixes: 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220315155455.20446-1-kvalo@kernel.org

show more ...

mac80211: fix struct ieee80211_tx_info size

The size of the status_driver_data field was not adjusted when
the is_valid_ack_signal field was added.
Since the size of struct ieee80211_tx_info is limi

mac80211: fix struct ieee80211_tx_info size

The size of the status_driver_data field was not adjusted when
the is_valid_ack_signal field was added.
Since the size of struct ieee80211_tx_info is limited, replace
the is_valid_ack_signal field with a flags field, and adjust the
struct size accordingly.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.0ff363d4fa56.I45792c0187034a6d0e1c99a7db741996ef7caba3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

ath10k: drop beacon and probe response which leak from other channel

When scan request on channel 1, it also receive beacon from other
channels, and the beacon also indicate to mac80211 and wpa_supp

ath10k: drop beacon and probe response which leak from other channel

When scan request on channel 1, it also receive beacon from other
channels, and the beacon also indicate to mac80211 and wpa_supplicant,
and then the bss info appears in radio measurement report of radio
measurement sent from wpa_supplicant, thus lead RRM case fail.

This is to drop the beacon and probe response which is not the same
channel of scanning.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211208061752.16564-1-quic_wgong@quicinc.com

show more ...

ath10k: Fix missing frame timestamp for beacon/probe-resp

When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac8

ath10k: Fix missing frame timestamp for beacon/probe-resp

When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)

This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629811733-7927-1-git-send-email-loic.poulain@linaro.org

show more ...

ath10k: Fix missing frame timestamp for beacon/probe-resp

[ Upstream commit e6dfbc3ba90cc2b619229be56b485f085a0a8e1c ]

When receiving a beacon or probe response, we should update the
boottime_ns fi

ath10k: Fix missing frame timestamp for beacon/probe-resp

[ Upstream commit e6dfbc3ba90cc2b619229be56b485f085a0a8e1c ]

When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)

This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).

Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629811733-7927-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ath10k: demote chan info without scan request warning

Some devices/firmwares cause this to be printed every 5-15 seconds,
though it has no impact on functionality. Demote this to a debug
message.

I

ath10k: demote chan info without scan request warning

Some devices/firmwares cause this to be printed every 5-15 seconds,
though it has no impact on functionality. Demote this to a debug
message.

I see this on SDM845 and MSM8998 platforms, specifically the OnePlus 6 devices,
PocoPhone F1 and OnePlus 5. On the OnePlus 6 (SDM845) we are stuck with the
following signed vendor fw:

[ 9.339873] ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
[ 9.339897] ath10k_snoc 18800000.wifi: qmi fw_version 0x20060029 fw_build_timestamp 2019-07-12 02:14 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c8-00041-QCAHLSWMTPLZ-1

The OnePlus 5 (MSM8998) is using firmware:

[ 6096.956799] ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002
[ 6096.956824] ath10k_snoc 18800000.wifi: qmi fw_version 0x1007007e fw_build_timestamp 2020-04-14 22:45 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0.c6-00126-QCAHLSWMTPLZ-1.211883.1.278648.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0.c8-00041-QCAHLSWMTPLZ-1
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.1.0.c6-00126-QCAHLSWMTPLZ-1.211883.1.278648

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522171609.299611-1-caleb@connolly.tech

show more ...

ath10k/ath11k: fix spelling mistake "requed" -> "requeued"

There are multiple occurrances of the misspelling of requeued in
the drivers with symbol names and debug text. Fix these.

Signed-off-by: C

ath10k/ath11k: fix spelling mistake "requed" -> "requeued"

There are multiple occurrances of the misspelling of requeued in
the drivers with symbol names and debug text. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210423134133.339751-1-colin.king@canonical.com

show more ...

ath10k: Add new debug level for sta related logs

Add new level ATH10K_DBG_STA debug_mask for printing
sta related logs. This will be useful to check the
debug logs of connection and changes related

ath10k: Add new debug level for sta related logs

Add new level ATH10K_DBG_STA debug_mask for printing
sta related logs. This will be useful to check the
debug logs of connection and changes related to
station.

Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612463738-16542-1-git-send-email-tamizhr@codeaurora.org

show more ...

ath10k: remove h from printk format specifier

This change fixes the checkpatch warning described in this commit
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
unnecessary %h[x

ath10k: remove h from printk format specifier

This change fixes the checkpatch warning described in this commit
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210127222344.2445641-1-trix@redhat.com

show more ...

ath10k: add atomic protection for device recovery

When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very easy to break the 1st restart work and lead
recovery fail.

Ad

ath10k: add atomic protection for device recovery

When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very easy to break the 1st restart work and lead
recovery fail.

Add a flag to allow only one restart work running untill
device successfully recovered.

It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this
flag again, because it is clear in ath10k_core_start. The function
ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do
many things and drv_start(call to ath10k_core_start) is 1st thing,
when drv_start complete, it does not mean restart complete. So it
add new flag and clear it in ath10k_reconfig_complete, because it
is the last thing called from drv_reconfig_complete of function
ieee80211_reconfig, after it, the restart process finished.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com

show more ...

ath10k: Fix the parsing error in service available event

The wmi service available event has been
extended to contain extra 128 bit for new services
to be indicated by firmware.

Currently the prese

ath10k: Fix the parsing error in service available event

The wmi service available event has been
extended to contain extra 128 bit for new services
to be indicated by firmware.

Currently the presence of any optional TLVs in
the wmi service available event leads to a parsing
error with the below error message:
ath10k_snoc 18800000.wifi: failed to parse svc_avail tlv: -71

The wmi service available event parsing should
not return error for the newly added optional TLV.
Fix this parsing for service available event message.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00720-QCAHLSWMTPL-1

Fixes: cea19a6ce8bf ("ath10k: add WMI_SERVICE_AVAILABLE_EVENT support")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605501291-23040-1-git-send-email-pillair@codeaurora.org

show more ...

ath10k: Don't iterate over not-sdata-in-driver interfaces.

This fixes possible crash scenario where interfaces that were not
set up in the driver yet might still be iterated over. When originally
d

ath10k: Don't iterate over not-sdata-in-driver interfaces.

This fixes possible crash scenario where interfaces that were not
set up in the driver yet might still be iterated over. When originally
debugged on the ath10k-ct driver, the crash looked like this:

kernel BUG at /home/greearb/git/linux-4.7.dev.y/drivers/net/wireless/ath/ath10k/wmi.c:1781!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
Modules linked in: nf_conntrack_netlink nf_conntrack nfnetlink nf_defrag_ipv4 bridge carl9170 mac80211_hwsim ath10k_pci ath10k_core ath5k ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 8021q garp mrp stp llc bnep bluetooth fuse macvlan pktgen rpcsec_gss_krb5 nfsv4 nfs fscache snd_hda_codec_hdmi coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek snd_hda_codec_generic kvm iTCO_wdt irqbypass iTCO_vendor_support joydev snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device pcspkr snd_pcm snd_timer shpchp snd i2c_i801 lpc_ich soundcore tpm_tis tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 serio_raw i2c_algo_bit drm_kms_helper ata_generic e1000e pata_acpi drm ptp pps_core i2c_core fjes video ipv6 [last unloaded: nf_conntrack]
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.10+ #15
Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013
task: ffff8801d4f20000 ti: ffff8801d4f28000 task.ti: ffff8801d4f28000
RIP: 0010:[<ffffffffa0efbcfb>] [<ffffffffa0efbcfb>] ath10k_wmi_tx_beacons_iter+0x28b/0x290 [ath10k_core]
RSP: 0018:ffff8801d6447a98 EFLAGS: 00010293
RAX: 0000000000000018 RBX: ffff8801ce97e1d8 RCX: 0000000000000000
RDX: 0000000000000018 RSI: 0000000000000003 RDI: ffffed003ac88f49
RBP: ffff8801d6447af0 R08: 0000000000000003 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: ffff8801ce97e320 R14: ffff8801ce97e378 R15: ffff8801ce97ca40
FS: 0000000000000000(0000) GS:ffff8801d6440000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007eff191ef1ab CR3: 000000000260a000 CR4: 00000000001406e0
Stack:
1ffff1003ac88f59 0000000041b58ab3 ffffffffa0f4d52a ffff8801d4f20000
0000000000000246 0000000000000002 ffff8801ce97e1d8 ffff8801bd5d39b8
0000000000000002 0000000000000001 ffff8801ce97ca40 ffff8801d6447b48
Call Trace:
<IRQ>
[<ffffffffa0d03e5c>] __iterate_interfaces+0xfc/0x1d0 [mac80211]
[<ffffffffa0efba70>] ? ath10k_wmi_cmd_send_nowait+0x260/0x260 [ath10k_core]
[<ffffffffa0efba70>] ? ath10k_wmi_cmd_send_nowait+0x260/0x260 [ath10k_core]
[<ffffffffa0d04477>] ieee80211_iterate_active_interfaces_atomic+0x67/0x100 [mac80211]
[<ffffffffa0d04410>] ? ieee80211_handle_reconfig_failure+0x140/0x140 [mac80211]
[<ffffffffa0ef4060>] ? ath10k_tpc_config_disp_tables+0x620/0x620 [ath10k_core]
[<ffffffffa0ef408b>] ath10k_wmi_op_ep_tx_credits+0x2b/0x50 [ath10k_core]
[<ffffffffa0ee2fd2>] ath10k_htc_rx_completion_handler+0x422/0x5c0 [ath10k_core]
[<ffffffffa0b4301e>] ath10k_pci_process_rx_cb+0x37e/0x430 [ath10k_pci]
[<ffffffffa0ee2bb0>] ? ath10k_htc_build_tx_ctrl_skb+0xc0/0xc0 [ath10k_core]
[<ffffffffa0b42ca0>] ? ath10k_pci_rx_post_pipe+0x550/0x550 [ath10k_pci]
[<ffffffff8120cbe5>] ? debug_lockdep_rcu_enabled+0x35/0x40
[<ffffffff811e1893>] ? mark_held_locks+0x23/0xc0
[<ffffffff8116019a>] ? __local_bh_enable_ip+0x6a/0xd0
[<ffffffff811e1abb>] ? trace_hardirqs_on_caller+0x18b/0x290
[<ffffffff811e1bcd>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff8116019a>] ? __local_bh_enable_ip+0x6a/0xd0
[<ffffffff81df11d0>] ? _raw_spin_unlock_bh+0x30/0x40
[<ffffffffa0b4902e>] ? ath10k_ce_per_engine_service+0xee/0x100 [ath10k_pci]
[<ffffffffa0b43139>] ath10k_pci_htt_htc_rx_cb+0x29/0x30 [ath10k_pci]
[<ffffffffa0b48fe6>] ath10k_ce_per_engine_service+0xa6/0x100 [ath10k_pci]
[<ffffffffa0b49116>] ath10k_ce_per_engine_service_any+0xd6/0xf0 [ath10k_pci]
[<ffffffffa0b45800>] ? ath10k_pci_enable_legacy_irq+0xe0/0xe0 [ath10k_pci]
[<ffffffffa0b4585f>] ath10k_pci_tasklet+0x5f/0xb0 [ath10k_pci]
[<ffffffff81160445>] tasklet_action+0x245/0x2b0
[<ffffffff81df4831>] __do_softirq+0x181/0x595
[<ffffffff8116137c>] irq_exit+0xbc/0xc0
[<ffffffff81df423c>] do_IRQ+0x7c/0x150
[<ffffffff81df23cc>] common_interrupt+0x8c/0x8c
<EOI>
[<ffffffff811e1abb>] ? trace_hardirqs_on_caller+0x18b/0x290
[<ffffffff81b722ae>] ? cpuidle_enter_state+0x1ae/0x4b0
[<ffffffff81b722a7>] ? cpuidle_enter_state+0x1a7/0x4b0
[<ffffffff81b72602>] cpuidle_enter+0x12/0x20
[<ffffffff811d0b6e>] call_cpuidle+0x4e/0x90
[<ffffffff811d10e7>] cpu_startup_entry+0x3f7/0x540
[<ffffffff811d0cf0>] ? default_idle_call+0x50/0x50
[<ffffffff81234bdf>] ? clockevents_config_and_register+0x5f/0x70
[<ffffffff81085a9a>] ? setup_APIC_timer+0xfa/0x110
[<ffffffff81083b63>] start_secondary+0x253/0x2b0
[<ffffffff81083910>] ? set_cpu_sibling_map+0x920/0x920
Code: 4d 49 e0 8b b3 48 01 00 00 48 c7 c7 a0 ee f3 a0 e8 d9 c2 3f e0 49 81 fd 3f 1f 00 00 76 0f 49 81 fc 3f 1f 00 00 0f 87 c0 fd ff ff <0f> 0b 0f 0b 90 55 48 89 e5 41 57 41 56 48 8d 85 58 ff ff ff 41
RIP [<ffffffffa0efbcfb>] ath10k_wmi_tx_beacons_iter+0x28b/0x290 [ath10k_core]
RSP <ffff8801d6447a98>
---[ end trace 6588464714e5163a ]---

Similar logic was tested for years in ath10k-ct driver and various firmware.

Also tested with stock kernel plus this patch, with firmware
10.2.4-1.0-00037

This test case was to bring up 5 vap on a radio and fake a firmware
crash. Make sure ap interfaces continue to function properly.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200922191957.25257-2-greearb@candelatech.com

show more ...

ath10k: Fix the parsing error in service available event

[ Upstream commit c7cee9c0f499f27ec6de06bea664b61320534768 ]

The wmi service available event has been
extended to contain extra 128 bit for

ath10k: Fix the parsing error in service available event

[ Upstream commit c7cee9c0f499f27ec6de06bea664b61320534768 ]

The wmi service available event has been
extended to contain extra 128 bit for new services
to be indicated by firmware.

Currently the presence of any optional TLVs in
the wmi service available event leads to a parsing
error with the below error message:
ath10k_snoc 18800000.wifi: failed to parse svc_avail tlv: -71

The wmi service available event parsing should
not return error for the newly added optional TLV.
Fix this parsing for service available event message.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00720-QCAHLSWMTPL-1

Fixes: cea19a6ce8bf ("ath10k: add WMI_SERVICE_AVAILABLE_EVENT support")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605501291-23040-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ath10k: wmi: Use struct_size() helper in ath10k_wmi_alloc_skb()

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes. Also, remove unne

ath10k: wmi: Use struct_size() helper in ath10k_wmi_alloc_skb()

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes. Also, remove unnecessary
variable _len_.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200616225132.GA19873@embeddedor

show more ...