wifi: ath9k: work around memset overflow warning

[ Upstream commit 61752ac69b69ed2e04444d090f6917c77ab36d42 ]

gcc-9 and some other older versions produce a false-positive warning
for zeroing two fi

wifi: ath9k: work around memset overflow warning

[ Upstream commit 61752ac69b69ed2e04444d090f6917c77ab36d42 ]

gcc-9 and some other older versions produce a false-positive warning
for zeroing two fields

In file included from include/linux/string.h:369,
from drivers/net/wireless/ath/ath9k/main.c:18:
In function 'fortify_memset_chk',
inlined from 'ath9k_ps_wakeup' at drivers/net/wireless/ath/ath9k/main.c:140:3:
include/linux/fortify-string.h:462:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
462 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Using a struct_group seems to reliably avoid the warning and
not make the code much uglier. The combined memset() should even
save a couple of cpu cycles.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-3-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

wifi: ath: Silence memcpy run-time false positive warning

The memcpy() in ath_key_config() was attempting to write across
neighboring struct members in struct ath_keyval. Introduce a wrapping
struct

wifi: ath: Silence memcpy run-time false positive warning

The memcpy() in ath_key_config() was attempting to write across
neighboring struct members in struct ath_keyval. Introduce a wrapping
struct_group, kv_values, to be the addressable target of the memcpy
without overflowing an individual member. Silences the false positive
run-time warning:

memcpy: detected field-spanning write (size 32) of single field "hk.kv_val" at drivers/net/wireless/ath/key.c:506 (size 16)

Link: https://bbs.archlinux.org/viewtopic.php?id=282254
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230210054310.never.554-kees@kernel.org

show more ...

ath: Modify ath_key_delete() to not need full key entry

tkip_keymap can be used internally to avoid the reference to key->cipher
and with this, only the key index value itself is needed. This allows

ath: Modify ath_key_delete() to not need full key entry

tkip_keymap can be used internally to avoid the reference to key->cipher
and with this, only the key index value itself is needed. This allows
ath_key_delete() call to be postponed to be handled after the upper
layer STA and key entry have already been removed. This is needed to
make ath9k key cache management safer.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214172118.18100-5-jouni@codeaurora.org

show more ...

ath: Export ath_hw_keysetmac()

ath9k is going to use this for safer management of key cache entries.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.

ath: Export ath_hw_keysetmac()

ath9k is going to use this for safer management of key cache entries.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214172118.18100-4-jouni@codeaurora.org

show more ...

ath: Modify ath_key_delete() to not need full key entry

commit 144cd24dbc36650a51f7fe3bf1424a1432f1f480 upstream.

tkip_keymap can be used internally to avoid the reference to key->cipher
and with t

ath: Modify ath_key_delete() to not need full key entry

commit 144cd24dbc36650a51f7fe3bf1424a1432f1f480 upstream.

tkip_keymap can be used internally to avoid the reference to key->cipher
and with this, only the key index value itself is needed. This allows
ath_key_delete() call to be postponed to be handled after the upper
layer STA and key entry have already been removed. This is needed to
make ath9k key cache management safer.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214172118.18100-5-jouni@codeaurora.org
Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ath: Export ath_hw_keysetmac()

commit d2d3e36498dd8e0c83ea99861fac5cf9e8671226 upstream.

ath9k is going to use this for safer management of key cache entries.

Signed-off-by: Jouni Malinen <jouni@c

ath: Export ath_hw_keysetmac()

commit d2d3e36498dd8e0c83ea99861fac5cf9e8671226 upstream.

ath9k is going to use this for safer management of key cache entries.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214172118.18100-4-jouni@codeaurora.org
Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ath: Remove unnecessary ath_bcast_mac and use eth_broadcast_addr

Remove the static array and use the generic routine to set the
Ethernet broadcast address.

Signed-off-by: Joe Perches <joe@perches.c

ath: Remove unnecessary ath_bcast_mac and use eth_broadcast_addr

Remove the static array and use the generic routine to set the
Ethernet broadcast address.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

ath9k: add a helper to get the string representation of ath_bus_type

This can be used when the ath_bus_type has to be presented in a log
message or firmware filename.

Signed-off-by: Martin Blumenst

ath9k: add a helper to get the string representation of ath_bus_type

This can be used when the ath_bus_type has to be presented in a log
message or firmware filename.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

cfg80211: remove enum ieee80211_band

This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reas

cfg80211: remove enum ieee80211_band

This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

ath9k: Add a new debug flag for FFT spectral scan

FFT spectral scan is a functionality that makes sense to have its own
debug flag.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-b

ath9k: Add a new debug flag for FFT spectral scan

FFT spectral scan is a functionality that makes sense to have its own
debug flag.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

ath9k_htc: add new WMI_REG_RMW_CMDID command

Since usb bus add extra delay on each request, a command
with read + write requests is too expensive. We can dramtically
reduce usb load by moving this c

ath9k_htc: add new WMI_REG_RMW_CMDID command

Since usb bus add extra delay on each request, a command
with read + write requests is too expensive. We can dramtically
reduce usb load by moving this command to firmware.

In my tests, this patch will reduce channel scan time
for about 5-10 seconds.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

ath9k: Check WOW triggers properly

This patch makes sure that valid WOW triggers
are present before trying to suspend the device.
Also, introduce and use ATH_OP_WOW_ENABLED to
bypass PCI suspend and

ath9k: Check WOW triggers properly

This patch makes sure that valid WOW triggers
are present before trying to suspend the device.
Also, introduce and use ATH_OP_WOW_ENABLED to
bypass PCI suspend and clear it in resume().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

ath: add struct ath_ps_ops

we will need it to make common code

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix address management

Since both the arguments need to satisfy
the alignment requirements of ether_addr_copy(),
use memcpy() in cases where there will be no
big performance benefit and make

ath9k: Fix address management

Since both the arguments need to satisfy
the alignment requirements of ether_addr_copy(),
use memcpy() in cases where there will be no
big performance benefit and make sure that
ether_addr_copy() calls use properly aligned
arguments.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath: use CTL region from cfg80211 if unset in EEPROM

Many AP devices do not have the proper regulatory domain programmed in
EEPROM. Instead they expect the software to set the appropriate region.
Fo

ath: use CTL region from cfg80211 if unset in EEPROM

Many AP devices do not have the proper regulatory domain programmed in
EEPROM. Instead they expect the software to set the appropriate region.
For these devices, the country code defaults to US, and the driver uses
the US CTL tables as well.
On devices bought in Europe this can lead to tx power being set too high
on the band edges, even if the cfg80211 regdomain is set correctly.
Fix this issue by taking into account the DFS region, but only when the
EEPROM regdomain is set to default.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath: Add support for tracing

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: add dynamic ACK timeout estimation

Add dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp,
TX frame timestamp and frame duration.

Signed-off-by: Lorenzo Bianconi <loren

ath9k: add dynamic ACK timeout estimation

Add dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp,
TX frame timestamp and frame duration.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Tested-by: Philippe Duchein <wireless-dev@duchein.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath9k: Add a debug level for channel context

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Add ATH_OP_MULTI_CHANNEL

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: move sc_flags to ath_common

we will need it for ath9k_htc, may be other drivers too

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver

ath9k: move sc_flags to ath_common

we will need it for ath9k_htc, may be other drivers too

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath9k: move ath9k_init_channels_rates to common-init

and rename it to ath9k_cmn_init_channels_rates.
sbands are move to ath_common as well.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Si

ath9k: move ath9k_init_channels_rates to common-init

and rename it to ath9k_cmn_init_channels_rates.
sbands are move to ath_common as well.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath: remove camel case from struct reg_dmn_pair_mapping

Fixes a checkpatch warning in ath10k:

drivers/net/wireless/ath/ath10k/mac.c:1636: WARNING: Avoid CamelCase: <regpair->regDmnEnum>

Signed-off

ath: remove camel case from struct reg_dmn_pair_mapping

Fixes a checkpatch warning in ath10k:

drivers/net/wireless/ath/ath10k/mac.c:1636: WARNING: Avoid CamelCase: <regpair->regDmnEnum>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath: add last_rssi to ath_common

we need access to this variable from common functions.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.co

ath: add last_rssi to ath_common

we need access to this variable from common functions.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath: add common function ath_is_mybeacon

this function is used by most ath driver, so it can be moved here.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <l

ath: add common function ath_is_mybeacon

this function is used by most ath driver, so it can be moved here.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...

ath9k: Cleanup WLAN/BT RX diversity

For single-chain WLAN+BT cards, the BT antenna can be used for
WLAN RX when the BT interface is disabled. Rename the modparam
"antenna_diversity" to "bt_ant_diver

ath9k: Cleanup WLAN/BT RX diversity

For single-chain WLAN+BT cards, the BT antenna can be used for
WLAN RX when the BT interface is disabled. Rename the modparam
"antenna_diversity" to "bt_ant_diversity" to clarify this.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

show more ...