Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36 |
|
#
31949154 |
| 23-Apr-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove genphy_no_soft_reset
Since 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") we don't need genphy_no_soft_reset() any longer. Not setting callback soft_reset results in a no
net: phy: remove genphy_no_soft_reset
Since 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") we don't need genphy_no_soft_reset() any longer. Not setting callback soft_reset results in a no-op now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0 |
|
#
7be3ad84 |
| 02-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove gen10g_no_soft_reset
genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andre
net: phy: remove gen10g_no_soft_reset
genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
c5e91d39 |
| 02-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove gen10g_config_init
ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all users of gen10g_conf
net: phy: remove gen10g_config_init
ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all users of gen10g_config_init use PHY_10GBIT_FEATURES.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
#
a2443fd1 |
| 21-Jan-2019 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Convert some PHY and MDIO driver files to SPDX headers
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text.
Signed-off-
net: phy: Convert some PHY and MDIO driver files to SPDX headers
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
40f89ebf |
| 17-Jan-2019 |
Camelia Groza <camelia.groza@nxp.com> |
net: phy: add missing phy driver features
The phy drivers for CS4340 and TN2020 are missing their features attributes. Add them.
Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with
net: phy: add missing phy driver features
The phy drivers for CS4340 and TN2020 are missing their features attributes. Add them.
Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
aebc78a4 |
| 01-Mar-2018 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: teranetics: Utilize generic functions
Update teranetics_aneg_done() to use genphy_c45_aneg_done() instead of duplicating that code, and switch to gen10g_* functions where appropriate inste
net: phy: teranetics: Utilize generic functions
Update teranetics_aneg_done() to use genphy_c45_aneg_done() instead of duplicating that code, and switch to gen10g_* functions where appropriate instead of maintaining identical copies doing nothing.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4 |
|
#
be01da72 |
| 06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Centralize setting driver module owner
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure wi
phy: Centralize setting driver module owner
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
fb0801dc |
| 14-Oct-2015 |
Axel Lin <axel.lin@ingics.com> |
net: phy: aquantia/teranetics: Convert to use module_phy_driver macro
Use module_phy_driver macro to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: David S. M
net: phy: aquantia/teranetics: Convert to use module_phy_driver macro
Use module_phy_driver macro to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4 |
|
#
94724d10 |
| 24-Jul-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: phy: fix auto negotiation checking for teranetics
When using fiber port, the phy cannot report it's auto negotiation state, driver should always report auto negotiation is done when using fiber
net: phy: fix auto negotiation checking for teranetics
When using fiber port, the phy cannot report it's auto negotiation state, driver should always report auto negotiation is done when using fiber port.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.2-rc3 |
|
#
f61687c0 |
| 16-Jul-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
phylib: add driver for Teranetics TN2020
Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@da
phylib: add driver for Teranetics TN2020
Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36 |
|
#
31949154 |
| 23-Apr-2020 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove genphy_no_soft_reset Since 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") we don't need genphy_no_soft_reset() any longer. Not setting callback soft_reset
net: phy: remove genphy_no_soft_reset Since 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") we don't need genphy_no_soft_reset() any longer. Not setting callback soft_reset results in a no-op now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0 |
|
#
7be3ad84 |
| 02-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove gen10g_no_soft_reset genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com
net: phy: remove gen10g_no_soft_reset genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
c5e91d39 |
| 02-Mar-2019 |
Heiner Kallweit <hkallweit1@gmail.com> |
net: phy: remove gen10g_config_init ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all user
net: phy: remove gen10g_config_init ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all users of gen10g_config_init use PHY_10GBIT_FEATURES. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
#
a2443fd1 |
| 21-Jan-2019 |
Andrew Lunn <andrew@lunn.ch> |
net: phy: Convert some PHY and MDIO driver files to SPDX headers Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text.
net: phy: Convert some PHY and MDIO driver files to SPDX headers Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
40f89ebf |
| 17-Jan-2019 |
Camelia Groza <camelia.groza@nxp.com> |
net: phy: add missing phy driver features The phy drivers for CS4340 and TN2020 are missing their features attributes. Add them. Fixes: 719655a14971 ("net: phy: Replace phy driv
net: phy: add missing phy driver features The phy drivers for CS4340 and TN2020 are missing their features attributes. Add them. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
aebc78a4 |
| 01-Mar-2018 |
Florian Fainelli <f.fainelli@gmail.com> |
net: phy: teranetics: Utilize generic functions Update teranetics_aneg_done() to use genphy_c45_aneg_done() instead of duplicating that code, and switch to gen10g_* functions where a
net: phy: teranetics: Utilize generic functions Update teranetics_aneg_done() to use genphy_c45_aneg_done() instead of duplicating that code, and switch to gen10g_* functions where appropriate instead of maintaining identical copies doing nothing. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4 |
|
#
be01da72 |
| 06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Centralize setting driver module owner Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device
phy: Centralize setting driver module owner Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
fb0801dc |
| 14-Oct-2015 |
Axel Lin <axel.lin@ingics.com> |
net: phy: aquantia/teranetics: Convert to use module_phy_driver macro Use module_phy_driver macro to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signe
net: phy: aquantia/teranetics: Convert to use module_phy_driver macro Use module_phy_driver macro to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4 |
|
#
94724d10 |
| 24-Jul-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
net: phy: fix auto negotiation checking for teranetics When using fiber port, the phy cannot report it's auto negotiation state, driver should always report auto negotiation is done when
net: phy: fix auto negotiation checking for teranetics When using fiber port, the phy cannot report it's auto negotiation state, driver should always report auto negotiation is done when using fiber port. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.2-rc3 |
|
#
f61687c0 |
| 16-Jul-2015 |
Shaohui Xie <Shaohui.Xie@freescale.com> |
phylib: add driver for Teranetics TN2020 Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David
phylib: add driver for Teranetics TN2020 Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|