net: stmmac: clarify difference between "interface" and "phy_interface"

Clarify the difference between "interface" and "phy_interface" in
struct plat_stmmacenet_data, both by adding a comment, and a

net: stmmac: clarify difference between "interface" and "phy_interface"

Clarify the difference between "interface" and "phy_interface" in
struct plat_stmmacenet_data, both by adding a comment, and also
renaming "interface" to be "mac_interface". The difference between
these are:

MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media
^ ^
mac_interface phy_interface

Note that phylink currently only deals with phy_interface.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZq83-005tts-6K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: stmmac: add new mode parameter for fix_mac_speed

A mode parameter has been added to the callback function of fix_mac_speed
to indicate the physical layer type.

The mode can be one the followin

net: stmmac: add new mode parameter for fix_mac_speed

A mode parameter has been added to the callback function of fix_mac_speed
to indicate the physical layer type.

The mode can be one the following:
MLO_AN_PHY - Conventional PHY
MLO_AN_FIXED - Fixed-link mode
MLO_AN_INBAND - In-band protocol

Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dwmac_socfpga: initialize local data for mdio regmap configuration

Explicitly zero-ize the local mdio_regmap_config data, and explicitly
set the .autoscan parameter, as we only have a PCS on th

net: dwmac_socfpga: initialize local data for mdio regmap configuration

Explicitly zero-ize the local mdio_regmap_config data, and explicitly
set the .autoscan parameter, as we only have a PCS on this bus.

Fixes: 5d1f3fe7d2d5 ("net: stmmac: dwmac-sogfpga: use the lynx pcs driver")
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: stmmac: make the pcs_lynx cleanup sequence specific to dwmac_socfpga

So far, only the dwmac_socfpga variant of stmmac uses PCS Lynx. Use a
dedicated cleanup sequence for dwmac_socfpga instead o

net: stmmac: make the pcs_lynx cleanup sequence specific to dwmac_socfpga

So far, only the dwmac_socfpga variant of stmmac uses PCS Lynx. Use a
dedicated cleanup sequence for dwmac_socfpga instead of using the
generic stmmac one.

Fixes: 5d1f3fe7d2d5 ("net: stmmac: dwmac-sogfpga: use the lynx pcs driver")
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: stmmac: dwmac-sogfpga: use the lynx pcs driver

dwmac_socfpga re-implements support for the TSE PCS, which is identical
to the already existing TSE PCS, which in turn is the same as the Lynx
PCS

net: stmmac: dwmac-sogfpga: use the lynx pcs driver

dwmac_socfpga re-implements support for the TSE PCS, which is identical
to the already existing TSE PCS, which in turn is the same as the Lynx
PCS. Drop the existing TSE re-implemenation and use the Lynx PCS
instead, relying on the regmap-mdio driver to translate MDIO accesses
into mmio accesses.

Add a lynx_pcs reference in the stmmac's internal structure, and use
.mac_select_pcs() to return the relevant PCS to be used.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: Make stmmac_pltfr_remove() return void

The function returns zero unconditionally. Change it to return void instead
which simplifies some callers as error handing becomes unnecessary.

T

net: stmmac: Make stmmac_pltfr_remove() return void

The function returns zero unconditionally. Change it to return void instead
which simplifies some callers as error handing becomes unnecessary.

The function is also used for some drivers as remove callback. Switch these
to the .remove_new() callback. For some others no error can happen in the
remove callback now, convert them to .remove_new(), too.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: ethernet: stmmac: fix write to sgmii_adapter_base

I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac:
fix altr_tse_pcs function when using a fixed-link"). I should have
teste

net: ethernet: stmmac: fix write to sgmii_adapter_base

I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac:
fix altr_tse_pcs function when using a fixed-link"). I should have
tested against both scenario of having a SGMII interface and one
without.

Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is
NULL, thus a write to this address will fail.

Cc: stable@vger.kernel.org
Fixes: a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link

When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_

net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link

When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.

Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.

Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform

According to upstream commit 5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
ma

net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform

According to upstream commit 5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
management for stmmac driver. So, it is necessary to implement
the runtime callback in dwmac-socfpga driver because it doesn't
use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks
are not disabled when system enters suspend status.

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: ethernet: stmmac: fix write to sgmii_adapter_base

commit 5fd1fe4807f91ea0cca043114d929faa11bd4190 upstream.

I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac:
fix altr_tse_

net: ethernet: stmmac: fix write to sgmii_adapter_base

commit 5fd1fe4807f91ea0cca043114d929faa11bd4190 upstream.

I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac:
fix altr_tse_pcs function when using a fixed-link"). I should have
tested against both scenario of having a SGMII interface and one
without.

Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is
NULL, thus a write to this address will fail.

Cc: stable@vger.kernel.org
Fixes: a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link

[ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ]

When using a fixed-link, the altr_tse_pcs driver crashes
due to

net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link

[ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ]

When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.

Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.

Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform

commit 9119570039481d56350af1c636f040fb300b8cf3 upstream.

According to upstream commit 5ec55823438e("net: stmmac:
ad

net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform

commit 9119570039481d56350af1c636f040fb300b8cf3 upstream.

According to upstream commit 5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
management for stmmac driver. So, it is necessary to implement
the runtime callback in dwmac-socfpga driver because it doesn't
use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks
are not disabled when system enters suspend status.

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

of: net: pass the dst buffer to of_get_mac_address()

of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
B

of: net: pass the dst buffer to of_get_mac_address()

of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.

There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.

Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().

Usually the code looks like:

const char *addr;
addr = of_get_mac_address(np);
if (!IS_ERR(addr))
ether_addr_copy(ndev->dev_addr, addr);

This can then be simply rewritten as:

of_get_mac_address(np, ndev->dev_addr);

Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.

The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!

<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
<...
- ether_addr_copy(z, x);
...>

@@
identifier a.x;
@@
- if (<+... x ...+>) {}

@@
identifier a.x;
@@
if (<+... x ...+>) {
...
}
- else {}

@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
- {}
- else
+ if (!(e))
{...}

@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
... when != x
</spml>

All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: fix enabling socfpga's ptp_ref_clock

There are 2 registers to write to enable a ptp ref clock coming from the
fpga.
One that enables the usage of the clock from the fpga for emac0 and e

net: stmmac: fix enabling socfpga's ptp_ref_clock

There are 2 registers to write to enable a ptp ref clock coming from the
fpga.
One that enables the usage of the clock from the fpga for emac0 and emac1
as a ptp ref clock, and the other to allow signals from the fpga to reach
emac0 and emac1.
Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will
be written and the ptp ref clock will be set as coming from the fpga.
Separate the 2 register writes to only enable signals from the fpga to
reach emac0 or emac1 when ptp ref clock is not coming from the fpga.

Signed-off-by: Julien Beraud <julien.beraud@orolia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: socfpga: Allow all RGMII modes

Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.c

net: stmmac: socfpga: Allow all RGMII modes

Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: socfpga: re-use the `interface` parameter from platform data

The socfpga sub-driver defines an `interface` field in the `socfpga_dwmac`
struct and parses it on init.

The shared `stmmac

net: stmmac: socfpga: re-use the `interface` parameter from platform data

The socfpga sub-driver defines an `interface` field in the `socfpga_dwmac`
struct and parses it on init.

The shared `stmmac_probe_config_dt()` function also parses this from the
device-tree and makes it available on the returned `plat_data` (which is
the same data available via `netdev_priv()`).

All that's needed now is to dig that information out, via some
`dev_get_drvdata()` && `netdev_priv()` calls and re-use it.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

net: stmmac: socfpga: fix phy and ptp_ref setup for Arria10/Stratix10

On the Arria10, Agilex, and Stratix10 SoC, there are a few differences from
the Cyclone5 and Arria5:
- The emac PHY setup bits

net: stmmac: socfpga: fix phy and ptp_ref setup for Arria10/Stratix10

On the Arria10, Agilex, and Stratix10 SoC, there are a few differences from
the Cyclone5 and Arria5:
- The emac PHY setup bits are in separate registers.
- The PTP reference clock select mask is different.
- The register to enable the emac signal from FPGA is different.

Thus, this patch creates a separate function for setting the phy modes on
Arria10/Agilex/Stratix10. The separation is based a new DTS binding:
"altr,socfpga-stmmac-a10-s10".

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: socfpga: add RMII phy mode

Add option for enabling RMII phy mode.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wei Liang Lim <wei.liang.lim@intel.com>
Signed-off

net: stmmac: socfpga: add RMII phy mode

Add option for enabling RMII phy mode.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wei Liang Lim <wei.liang.lim@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: socfpga: Use shared System Manager driver

The ARM64 System Manager requires a different method of reading
the System Manager than ARM32. A new System Manager driver was
created to steer

net: stmmac: socfpga: Use shared System Manager driver

The ARM64 System Manager requires a different method of reading
the System Manager than ARM32. A new System Manager driver was
created to steer ARM32 System Manager calls to regmap_mmio and
ARM64 System Manager calls to the new access method.

Convert from syscon to the shared System Manager driver so that
both ARM64 and ARM32 are supported.

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

show more ...

net: stmmac: socfpga: add additional ocp reset line for Stratix10

The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ether

net: stmmac: socfpga: add additional ocp reset line for Stratix10

The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ethernet controller to work.
Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
dwmac-socfpga.

Also, remove the redundant check for the reset controller pointer. The
reset driver already checks for the pointer and returns 0 if the pointer
is NULL.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: stmmac: socfgpa: Ensure emac bit set in sys manager for MII/GMII/SGMII.

When using MII/GMII/SGMII in the Altera SoC, the phy needs to be
wired through the FPGA. To ensure correct behavior, the

net: stmmac: socfgpa: Ensure emac bit set in sys manager for MII/GMII/SGMII.

When using MII/GMII/SGMII in the Altera SoC, the phy needs to be
wired through the FPGA. To ensure correct behavior, the appropriate
bit in the System Manager FPGA Interface Group register needs to be
set.

Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure

This patch moves stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to the
plat_stmmacenet_data structure. It also moves the

stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure

This patch moves stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to the
plat_stmmacenet_data structure. It also moves these platform variables
initialization to stmmac_platform. This was done for two reasons:

a) If PCI is used, platform related code is being executed in stmmac_main
resulting in warnings that have no sense and conceptually was not right

b) stmmac as a synopsys reference ethernet driver stack will be hosting
more and more drivers to its structure like synopsys/dwc_eth_qos.c.
These drivers have their own DT bindings that are not compatible with
stmmac's. One of the most important are the clock names, and so they need
to be parsed in the glue logic and initialized there, and that is the main
reason why the clocks were passed to the platform structure.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Reviewed-by: Lars Persson <larper@axis.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks

Make sure to deregister and free any fixed-link phy registered during
probe on probe errors and on driver unbind by adding a new glue h

net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks

Make sure to deregister and free any fixed-link phy registered during
probe on probe errors and on driver unbind by adding a new glue helper
function.

Drop the of-node reference taken in the same path also on late probe
errors (and not just on driver unbind) by moving the put from
stmmac_dvr_remove() to the new helper.

Fixes: 277323814e49 ("stmmac: add fixed-link device-tree support")
Fixes: 4613b279bee7 ("ethernet: stmicro: stmmac: add missing of_node_put
after calling of_parse_phandle")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: ethernet: stmmac: dwmac-socfpga: fix use-after-free on probe errors

Make sure to call stmmac_dvr_remove() before returning on late probe
errors so that memory is freed, clocks are disabled, and

net: ethernet: stmmac: dwmac-socfpga: fix use-after-free on probe errors

Make sure to call stmmac_dvr_remove() before returning on late probe
errors so that memory is freed, clocks are disabled, and the netdev is
deregistered before its resources go away.

Fixes: 3c201b5a84ed ("net: stmmac: socfpga: Remove re-registration of
reset controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...