Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10 |
|
#
6c95dd8f |
| 04-Oct-2021 |
Prabhakar Kushwaha <pkushwaha@marvell.com> |
qed: Update debug related changes
qed_debug features are updated to support FW version 8.59.1.0 along with few enhancements. - Removal of _BB_K2 from register defines. - Add new condition cond14
qed: Update debug related changes
qed_debug features are updated to support FW version 8.59.1.0 along with few enhancements. - Removal of _BB_K2 from register defines. - Add new condition cond14. - Add dump of new area sw-platform, epoch, iscsi_task_pages, fcoe_task_pages, roce_task_pages and eth_task_pages. - Introduced new functions qed_dbg_phy_size(). - Update in qed_mcp_nvm_rd_cmd() declaration. - Allow QED to control init/exit at pf level. - Dump partial "ILT-dump" if buffer size is not sufficient.
This patch also fixes the existing checkpatch warnings and few important checks.
Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
19198e4e |
| 04-Oct-2021 |
Prabhakar Kushwaha <pkushwaha@marvell.com> |
qed: Fix kernel-doc warnings
This patch fixes all the qed and qede kernel-doc warnings according to the guidelines that are described in Documentation/doc-guide/kernel-doc.rst.
Signed-off-by: Ariel
qed: Fix kernel-doc warnings
This patch fixes all the qed and qede kernel-doc warnings according to the guidelines that are described in Documentation/doc-guide/kernel-doc.rst.
Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42 |
|
#
1bd4f571 |
| 02-Jun-2021 |
Omkar Kulkarni <okulkarni@marvell.com> |
qed: Add TCP_ULP FW resource layout
Add TCP_ULP as a storage common TCP offload FW resource layout. This will be used by the core driver (QED) for both the NVMeTCP and iSCSI.
Acked-by: Igor Russkik
qed: Add TCP_ULP FW resource layout
Add TCP_ULP as a storage common TCP offload FW resource layout. This will be used by the core driver (QED) for both the NVMeTCP and iSCSI.
Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
#
93be5261 |
| 16-Nov-2020 |
Dmitry Bogdanov <dbogdanov@marvell.com> |
qed: fix ILT configuration of SRC block
The code refactoring of ILT configuration was not complete, the old unused variables were used for the SRC block. That could lead to the memory corruption by
qed: fix ILT configuration of SRC block
The code refactoring of ILT configuration was not complete, the old unused variables were used for the SRC block. That could lead to the memory corruption by HW when rx filters are configured. This patch completes that refactoring.
Fixes: 8a52bbab39c9 (qed: Debug feature: ilt and mdump) Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Link: https://lore.kernel.org/r/20201116132944.2055-1-dbogdanov@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7 |
|
#
663eacd8 |
| 29-Jun-2020 |
Alexander Lobakin <alobakin@marvell.com> |
net: qed: update copyright years
Set the actual copyright holder and years in all qed source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@m
net: qed: update copyright years
Set the actual copyright holder and years in all qed source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
1f4d4ed6 |
| 29-Jun-2020 |
Alexander Lobakin <alobakin@marvell.com> |
net: qed: convert to SPDX License Identifiers
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the cor
net: qed: convert to SPDX License Identifiers
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42 |
|
#
b8204ad8 |
| 19-May-2020 |
Yuval Basson <ybason@marvell.com> |
qed: changes to ILT to support XRC
First ILT page for TSDM client is allocated for XRC-SRQ's. For regular SRQ's skip first ILT page that is reserved for XRC-SRQ's.
Signed-off-by: Michal Kalderon <m
qed: changes to ILT to support XRC
First ILT page for TSDM client is allocated for XRC-SRQ's. For regular SRQ's skip first ILT page that is reserved for XRC-SRQ's.
Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Bason <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16 |
|
#
8a52bbab |
| 27-Jan-2020 |
Michal Kalderon <michal.kalderon@marvell.com> |
qed: Debug feature: ilt and mdump
Part of the FW drop includes new debug capabilities implemented in the qed_debug file. This patch dumps additional information during ethtool -d for better debuggin
qed: Debug feature: ilt and mdump
Part of the FW drop includes new debug capabilities implemented in the qed_debug file. This patch dumps additional information during ethtool -d for better debugging. The data dumped is the ilt (internal logical table) and information gathered by the management firmware incase there was a crash and driver was not able to extract the information (mdump).
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
39dbc646 |
| 03-Jun-2018 |
Yuval Bason <yuval.bason@cavium.com> |
qed: Add srq core support for RoCE and iWARP
This patch adds support for configuring SRQ and provides the necessary APIs for rdma upper layer driver (qedr) to enable the SRQ feature.
Signed-off-by:
qed: Add srq core support for RoCE and iWARP
This patch adds support for configuring SRQ and provides the necessary APIs for rdma upper layer driver (qedr) to enable the SRQ feature.
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.16, v4.15 |
|
#
da090917 |
| 27-Dec-2017 |
Tomer Tayar <Tomer.Tayar@cavium.com> |
qed*: Utilize FW 8.33.1.0
Advance the qed* drivers to use firmware 8.33.1.0: Modify core driver (qed) to utilize the new FW and initialize the device with it. This is the lion's share of the patch,
qed*: Utilize FW 8.33.1.0
Advance the qed* drivers to use firmware 8.33.1.0: Modify core driver (qed) to utilize the new FW and initialize the device with it. This is the lion's share of the patch, and includes changes to FW interface files, device initialization flows, FW interaction flows, and debug collection flows. Modify Ethernet driver (qede) to make use of new FW in fastpath. Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath. Modify FCoE driver (qedf) to make use of new FW in fastpath. Modify iSCSI driver (qedi) to make use of new FW in fastpath.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
6bea61da |
| 04-Jun-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed: Add bitmaps for VF CIDs
Each PF has a bitmap for its own ranges of CIDs, to allow easy grabbing of an available CID when such is needed. But VFs are not using the same mechanism, instead relyin
qed: Add bitmaps for VF CIDs
Each PF has a bitmap for its own ranges of CIDs, to allow easy grabbing of an available CID when such is needed. But VFs are not using the same mechanism, instead relying on hard-coded CIDs [ queue-index == cid ].
As an infrastructure step toward increasing number of CIDs of VFs, the PF is going to maintain bitmaps for the VF CIDs as well - the bitmaps would be per-VF and the ranges would be the same [in HW all VFs of a given PF have the same mapping of CIDs, and the HW is capable of distinguishing between those according to the VF index]
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9 |
|
#
15582962 |
| 06-Apr-2017 |
Rahul Verma <Rahul.Verma@cavium.com> |
qed: Don't use main-ptt in unrelated flows
In order to access HW registers driver needs to acquire a PTT entry [mapping between bar memory and internal chip address]. Since acquiring PTT entries cou
qed: Don't use main-ptt in unrelated flows
In order to access HW registers driver needs to acquire a PTT entry [mapping between bar memory and internal chip address]. Since acquiring PTT entries could fail [at least in theory] as their number is finite and other flows can hold them, we reserve special PTT entries for 'important' enough flows - ones we want to guarantee that would not be susceptible to such issues.
One such special entry is the 'main' PTT which is meant to be used in flows such as chip initialization and de-initialization. However, there are other flows that are also using that same entry for their own purpose, and might run concurrently with the original flows [notice that for most cases using the main-ptt by mistake, such a race is still impossible, at least today].
This patch re-organizes the various functions that currently use the main_ptt in one of two ways:
- If a function shouldn't use the main_ptt it starts acquiring and releasing it's own PTT entry and use it instead. Notice if those functions previously couldn't fail, they now can [as acquisition might fail].
- Change the prototypes so that the main_ptt would be received as a parameter [instead of explicitly accessing it]. This prevents the future risk of adding codes that introduces new use-cases for flows using the main_ptt, ones that might be in race with the actual 'main' flows.
Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
f9dc4d1f |
| 03-Apr-2017 |
Ram Amrani <Ram.Amrani@cavium.com> |
qed: Manage with less memory regions for RoCE
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how m
qed: Manage with less memory regions for RoCE
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how many memory regions would have to be dropped due to limit, and manage without those.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
1e128c81 |
| 15-Feb-2017 |
Arun Easi <arun.easi@qlogic.com> |
qed: Add support for hardware offloaded FCoE.
This adds the backbone required for the various HW initalizations which are necessary for the FCoE driver (qedf) for QLogic FastLinQ 4xxxx line of adapt
qed: Add support for hardware offloaded FCoE.
This adds the backbone required for the various HW initalizations which are necessary for the FCoE driver (qedf) for QLogic FastLinQ 4xxxx line of adapters - FW notification, resource initializations, etc.
Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
e8f1cb50 |
| 01-Jan-2017 |
Mintz, Yuval <Yuval.Mintz@cavium.com> |
qed*: Update to dual-license
Since the submission of the qedr driver, there's inconsistency in the licensing of the various qed/qede files - some are GPLv2 and some are dual-license. Since qedr requ
qed*: Update to dual-license
Since the submission of the qedr driver, there's inconsistency in the licensing of the various qed/qede files - some are GPLv2 and some are dual-license. Since qedr requires dual-license and it's dependent on both, we're updating the licensing of all qed/qede source files.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8 |
|
#
f1093940 |
| 01-Oct-2016 |
Ram Amrani <Ram.Amrani@caviumnetworks.com> |
qed: Add support for QP verbs
Add support for the slowpath configurations of Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs.
Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetw
qed: Add support for QP verbs
Add support for the slowpath configurations of Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs.
Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
51ff1725 |
| 01-Oct-2016 |
Ram Amrani <Ram.Amrani@caviumnetworks.com> |
qed: Add support for RoCE hw init
This adds the backbone required for the various HW initalizations which are necessary for the qedr driver - FW notification, resource initializations, etc.
Signed-
qed: Add support for RoCE hw init
This adds the backbone required for the various HW initalizations which are necessary for the qedr driver - FW notification, resource initializations, etc.
Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1 |
|
#
dbb799c3 |
| 03-Jun-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Initialize hardware for new protocols
RoCE and iSCSI would require some added/changed hw configuration in order to properly run; The biggest single change being the requirement of allocating an
qed: Initialize hardware for new protocols
RoCE and iSCSI would require some added/changed hw configuration in order to properly run; The biggest single change being the requirement of allocating and mapping host memory for several HW blocks that aren't being used by qede [SRC, QM, TM, etc.].
In addition, whereas qede is only using context memory for HW blocks, the new protocol would also require task memories to be added.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1 |
|
#
39651abd |
| 17-May-2016 |
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> |
qed: add support for dcbx.
This patch adds the necessary driver support for Management Firmware to configure the device/firmware with the dcbx results. Management Firmware is responsible for communi
qed: add support for dcbx.
This patch adds the necessary driver support for Management Firmware to configure the device/firmware with the dcbx results. Management Firmware is responsible for communicating the DCBX and driving the negotiation, but the driver has responsibility of receiving async notification and configuring the results in hw/fw. This patch also adds the dcbx support for future protocols (e.g., FCoE) as preparation to their imminent submission.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.6 |
|
#
1408cc1f |
| 11-May-2016 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Introduce VFs
This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security de
qed: Introduce VFs
This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them.
This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
fe56b9e6 |
| 26-Oct-2015 |
Yuval Mintz <Yuval.Mintz@qlogic.com> |
qed: Add module with basic common support
The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic.
This module serves two main purposes: 1. It's responsible to c
qed: Add module with basic common support
The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic.
This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category.
2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI.
This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
#
93be5261 |
| 16-Nov-2020 |
Dmitry Bogdanov <dbogdanov@marvell.com> |
qed: fix ILT configuration of SRC block The code refactoring of ILT configuration was not complete, the old unused variables were used for the SRC block. That could lead to the memory
qed: fix ILT configuration of SRC block The code refactoring of ILT configuration was not complete, the old unused variables were used for the SRC block. That could lead to the memory corruption by HW when rx filters are configured. This patch completes that refactoring. Fixes: 8a52bbab39c9 (qed: Debug feature: ilt and mdump) Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Link: https://lore.kernel.org/r/20201116132944.2055-1-dbogdanov@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7 |
|
#
663eacd8 |
| 29-Jun-2020 |
Alexander Lobakin <alobakin@marvell.com> |
net: qed: update copyright years Set the actual copyright holder and years in all qed source files. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor R
net: qed: update copyright years Set the actual copyright holder and years in all qed source files. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
1f4d4ed6 |
| 29-Jun-2020 |
Alexander Lobakin <alobakin@marvell.com> |
net: qed: convert to SPDX License Identifiers QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace
net: qed: convert to SPDX License Identifiers QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the correct SPDX tag. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42 |
|
#
b8204ad8 |
| 19-May-2020 |
Yuval Basson <ybason@marvell.com> |
qed: changes to ILT to support XRC First ILT page for TSDM client is allocated for XRC-SRQ's. For regular SRQ's skip first ILT page that is reserved for XRC-SRQ's. Signed-of
qed: changes to ILT to support XRC First ILT page for TSDM client is allocated for XRC-SRQ's. For regular SRQ's skip first ILT page that is reserved for XRC-SRQ's. Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Bason <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|