net: mscc: ocelot: fix pMAC TX RMON stats for bucket 256-511 and above

[ Upstream commit 70f010da00f90415296f93fb47a561977eae41cb ]

The typo from ocelot_port_rmon_stats_cb() was also carried over t

net: mscc: ocelot: fix pMAC TX RMON stats for bucket 256-511 and above

[ Upstream commit 70f010da00f90415296f93fb47a561977eae41cb ]

The typo from ocelot_port_rmon_stats_cb() was also carried over to
ocelot_port_pmac_rmon_stats_cb() as well, leading to incorrect TX RMON
stats for the pMAC too.

Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: mscc: ocelot: fix eMAC TX RMON stats for bucket 256-511 and above

[ Upstream commit 52eda4641d041667fa059f4855c5f88dcebd8afe ]

There is a typo in the driver due to which we report incorrect TX

net: mscc: ocelot: fix eMAC TX RMON stats for bucket 256-511 and above

[ Upstream commit 52eda4641d041667fa059f4855c5f88dcebd8afe ]

There is a typo in the driver due to which we report incorrect TX RMON
counters for the 256-511 octet bucket and all the other buckets larger
than that.

Bug found with the selftest at
https://patchwork.kernel.org/project/netdevbpf/patch/20231211223346.2497157-9-tobias@waldekranz.com/

Fixes: e32036e1ae7b ("net: mscc: ocelot: add support for all sorts of standardized counters present in DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231214000902.545625-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: mscc: ocelot: fix ineffective WARN_ON() in ocelot_stats.c

Since it is hopefully now clear that, since "last" and "layout[i].reg"
are enum types and not addresses, the existing WARN_ON() is inef

net: mscc: ocelot: fix ineffective WARN_ON() in ocelot_stats.c

Since it is hopefully now clear that, since "last" and "layout[i].reg"
are enum types and not addresses, the existing WARN_ON() is ineffective
in checking that the _addresses_ are sorted in the proper order.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: strengthen type of "int i" in ocelot_stats.c

The "int i" used to index the struct ocelot_stat_layout array actually
has a specific type: enum ocelot_stat. Use it, so that the WARN

net: mscc: ocelot: strengthen type of "int i" in ocelot_stats.c

The "int i" used to index the struct ocelot_stat_layout array actually
has a specific type: enum ocelot_stat. Use it, so that the WARN()
comment from ocelot_prepare_stats_regions() makes more sense.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: strengthen type of "u32 reg" and "u32 base" in ocelot_stats.c

Use the specific enum ocelot_reg to make it clear that the region
registers are encoded and not plain addresses.

Sig

net: mscc: ocelot: strengthen type of "u32 reg" and "u32 base" in ocelot_stats.c

Use the specific enum ocelot_reg to make it clear that the region
registers are encoded and not plain addresses.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: remove blank line at the end of ocelot_stats.c

Commit a3bb8f521fd8 ("net: mscc: ocelot: remove unnecessary exposure of
stats structures") made an unnecessary change which was to a

net: mscc: ocelot: remove blank line at the end of ocelot_stats.c

Commit a3bb8f521fd8 ("net: mscc: ocelot: remove unnecessary exposure of
stats structures") made an unnecessary change which was to add a new
line at the end of ocelot_stats.c. Remove it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: debugging print for statistics regions

To make it easier to debug future issues with statistics counters not
getting aggregated properly into regions, like what happened in commit

net: mscc: ocelot: debugging print for statistics regions

To make it easier to debug future issues with statistics counters not
getting aggregated properly into regions, like what happened in commit
6acc72a43eac ("net: mscc: ocelot: fix stats region batching"), add some
dev_dbg() prints which show the regions that were dynamically
determined.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: add TX_MM_HOLD to ocelot_mm_stats_layout

The lack of a definition for this counter is what initially prompted me
to investigate a problem which really manifested itself as the pre

net: mscc: ocelot: add TX_MM_HOLD to ocelot_mm_stats_layout

The lack of a definition for this counter is what initially prompted me
to investigate a problem which really manifested itself as the previous
change, "net: mscc: ocelot: fix transfer from region->buf to ocelot->stats".

When TX_MM_HOLD is defined in enum ocelot_stat but not in struct
ocelot_stat_layout ocelot_mm_stats_layout, this creates a hole, which
due to the aforementioned bug, makes all counters following TX_MM_HOLD
be recorded off by one compared to their correct position. So for
example, a non-zero TX_PMAC_OCTETS would be reported as TX_MERGE_FRAGMENTS,
TX_PMAC_UNICAST would be reported as TX_PMAC_OCTETS, TX_PMAC_64 would be
reported as TX_PMAC_PAUSE, etc etc. This is because the size of the hole
(1) is much smaller than the size of the region, so the phenomenon where
the stats are off-by-one, rather than lost, prevails.

However, the phenomenon where stats are lost can be seen too, for
example with DROP_LOCAL, which is at the beginning of its own region
(offset 0x000400 vs the previous 0x0002b0 constitutes a discontinuity).
This is also reported as off by one and saved to TX_PMAC_1527_MAX, but
that counter is not reported to the unstructured "ethtool -S", as
opposed to DROP_LOCAL which is (as "drop_local").

Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: fix transfer from region->buf to ocelot->stats

To understand the problem, we need some definitions.

The driver is aware of multiple counters (enum ocelot_stat), yet not all
switc

net: mscc: ocelot: fix transfer from region->buf to ocelot->stats

To understand the problem, we need some definitions.

The driver is aware of multiple counters (enum ocelot_stat), yet not all
switches supported by the driver implement all counters. There are 2
statistics layouts: ocelot_stats_layout and ocelot_mm_stats_layout, the
latter having 36 counters more than the former.

ocelot->stats[] is not a compact array, i.e. there are elements within
it which are not going to be populated for ocelot_stats_layout. On the
other hand, ocelot->stats[] is easily indexable, for example "tx_octets"
for port 3 can be found at ocelot->stats[3 * OCELOT_NUM_STATS +
OCELOT_STAT_TX_OCTETS], and that is why we keep it sparse.

Regions, as created by ocelot_prepare_stats_regions(), are compact
(every element from region->buf will correspond to a counter that is
present in this switch's layout) but are not easily indexable.

Let's define holes as the ranges of values of enum ocelot_stat for which
ocelot_stats_layout doesn't have a "reg" defined. For example, there is
a hole between OCELOT_STAT_RX_GREEN_PRIO_7 and OCELOT_STAT_TX_OCTETS
which is of 23 elements that are only present on ocelot_mm_stats_layout,
and as such, they are also present in enum ocelot_stat. Let's define the
left extremity of the hole - the last enum ocelot_stat still defined -
as A (in this case OCELOT_STAT_RX_GREEN_PRIO_7) and the right extremity -
the first enum ocelot_stat that is defined after a series of undefined
ones - as B (in this case OCELOT_STAT_TX_OCTETS).

There is a bug in the procedure which transfers stats from region->buf[]
to ocelot->stats[].

For each hole in the ocelot_stats_layout, the logic transfers the stats
starting with enum ocelot_stat B to ocelot->stats[] index A + 1. So all
stats after a hole are saved to a position which is off by B - A + 1
elements.

This causes 2 kinds of issues:
(a) counters which shouldn't increment increment
(b) counters which should increment don't

Holes in the ocelot_stat_layout automatically imply the end of a region
and the beginning of a new one; however the reverse is not necessarily
true. For example, for ocelot_mm_stat_layout, there could be multiple
regions (which indicate discontinuities in register addresses) while
there is no hole (which indicates discontinuities in enum ocelot_stat
values).

In the example above, the stats from the second region->buf[] are not
transferred to ocelot->stats starting with index
"port * OCELOT_NUM_STATS + OCELOT_STAT_TX_OCTETS" as they should, but
rather, starting with element
"port * OCELOT_NUM_STATS + OCELOT_STAT_RX_GREEN_PRIO_7 + 1".

That stats[] array element is not reported to user space for switches
that use ocelot_stat_layout, and that is how issue (b) occurs.

However, if the length of the second region is larger than the hole,
then some stats will start to be transferred to the ocelot->stats[]
indices which *are* reported to user space, but those indices contain
wrong values (corresponding to unexpected counters). This is how issue
(a) occurs.

The procedure, as it was introduced in commit d87b1c08f38a ("net: mscc:
ocelot: use bulk reads for stats"), was not buggy, because there were no
holes in the struct ocelot_stat_layout instances at that time. The
problem is that when those holes were introduced, the function was not
updated to take them into consideration.

To update the procedure, we need to know, for each region, which enum
ocelot_stat corresponds to its region->base. We have no way of deducing
that based on the contents of struct ocelot_stats_region, so we need to
add this information.

Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: fix stats region batching

The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".

However, "u32 reg" is not quite a register address, but an enum
ocelot

net: mscc: ocelot: fix stats region batching

The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".

However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.

So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.

What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.

With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):

Before:

region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]

After:

region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.

Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: ethtool: provide shims for stats aggregation helpers when CONFIG_ETHTOOL_NETLINK=n

ethtool_aggregate_*_stats() are implemented in net/ethtool/stats.c, a
file which is compiled out when CONFIG_E

net: ethtool: provide shims for stats aggregation helpers when CONFIG_ETHTOOL_NETLINK=n

ethtool_aggregate_*_stats() are implemented in net/ethtool/stats.c, a
file which is compiled out when CONFIG_ETHTOOL_NETLINK=n. In order to
avoid adding Kbuild dependencies from drivers (which call these helpers)
on CONFIG_ETHTOOL_NETLINK, let's add some shim definitions which simply
make the helpers dead code.

This means the function prototypes should have been located in
include/linux/ethtool_netlink.h rather than include/linux/ethtool.h.

Fixes: 449c5459641a ("net: ethtool: add helpers for aggregate statistics")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230125110214.4127759-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959

The Felix VSC9959 switch supports frame preemption and has a MAC Merge
layer. In addition to the structured stats that exist for t

net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959

The Felix VSC9959 switch supports frame preemption and has a MAC Merge
layer. In addition to the structured stats that exist for the eMAC,
export the counters associated with its pMAC (pause, RMON, MAC, PHY,
control) plus the high-level MAC Merge layer stats. The unstructured
ethtool counters, as well as the rtnl_link_stats64 were left to report
only the eMAC counters.

Because statistics processing is quite self-contained in ocelot_stats.c
now, I've opted for introducing an ocelot->mm_supported bool, based on
which the common switch lib does everything, rather than pushing the
TSN-specific code in felix_vsc9959.c, as happens for other TSN stuff.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: hide access to ocelot_stats_layout behind a helper

Some hardware instances of the ocelot driver support the MAC Merge
layer, which gives access to an extra preemptible MAC. This h

net: mscc: ocelot: hide access to ocelot_stats_layout behind a helper

Some hardware instances of the ocelot driver support the MAC Merge
layer, which gives access to an extra preemptible MAC. This has
implications upon the statistics. There will be a stats layout when MM
isn't supported, and a different one when it is.
The ocelot_stats_layout() helper will return the correct one.
In preparation of that, refactor the existing code to use this helper.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: allow ocelot_stat_layout elements with no name

We will add support for pMAC counters and MAC merge layer counters,
which are only reported via the structured stats, and the curren

net: mscc: ocelot: allow ocelot_stat_layout elements with no name

We will add support for pMAC counters and MAC merge layer counters,
which are only reported via the structured stats, and the current
ocelot_get_strings() stands in our way, because it expects that the
statistics should be placed in the data array at the same index as found
in the ocelot_stats_layout array.

That is not true. Statistics which don't have a name should not be
exported to the unstructured ethtool -S, so we need to have different
indices into the ocelot_stats_layout array (i) and into the data array
(data itself).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: issue a warning if stats are incorrectly ordered

Ocelot uses regmap_bulk_read() operations to efficiently read stats
registers. Currently the implementation relies on the stats la

net: mscc: ocelot: issue a warning if stats are incorrectly ordered

Ocelot uses regmap_bulk_read() operations to efficiently read stats
registers. Currently the implementation relies on the stats layout to be
ordered to be most efficient.

Issue a warning if any future implementations happen to break this pattern.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: mscc: ocelot: remove unnecessary exposure of stats structures

Since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") there is no longer a need to

net: mscc: ocelot: remove unnecessary exposure of stats structures

Since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") there is no longer a need to share the
stats structures to the world. Relocate these definitions to inside
ocelot_stats.c instead of a global include header.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: mscc: ocelot: remove redundant stats_layout pointers

Ever since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") the stats_layout entry in ocelot

net: mscc: ocelot: remove redundant stats_layout pointers

Ever since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") the stats_layout entry in ocelot and
felix drivers have become redundant. Remove the unnecessary code.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: mscc: ocelot: add support for all sorts of standardized counters present in DSA

DSA is integrated with the new standardized ethtool -S --groups option,
but the felix driver only exports unstruc

net: mscc: ocelot: add support for all sorts of standardized counters present in DSA

DSA is integrated with the new standardized ethtool -S --groups option,
but the felix driver only exports unstructured statistics.

Reuse the array of 64-bit statistics collected by ocelot_check_stats_work(),
but just export select values from it.

Since ocelot_check_stats_work() runs periodically to avoid 32-bit
overflow, and the ethtool calling context is sleepable, we update the
64-bit stats one more time, to provide up-to-date values. The locking
scheme with a mutex followed by a spinlock is a bit hard to digest, so
we create and use a ocelot_port_stats_run() helper with a callback that
populates the ethool stats group the caller is interested in.

The exported stats are:
ethtool -S swp0 --groups eth-phy
ethtool -S swp0 --groups eth-mac
ethtool -S swp0 --groups eth-ctrl
ethtool -S swp0 --groups rmon
ethtool --include-statistics --show-pause swp0

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: exclude stats from bulk regions based on reg, not name

We want to introduce elements kept in ocelot->stats that aren't exposed
to the unstructured ethtool -S (so they won't have t

net: mscc: ocelot: exclude stats from bulk regions based on reg, not name

We want to introduce elements kept in ocelot->stats that aren't exposed
to the unstructured ethtool -S (so they won't have their name populated),
but are otherwise checked for 32-bit wraparounds by
ocelot_port_update_stats().

This isn't possible today because ocelot_prepare_stats_regions() skips
over ocelot_stat_layout elements with no name. Now that we've changed
struct ocelot_stat_layout to keep the absolute register address rather
than the offset relative to SYS_CNT, we can make use of the unpopulated
"reg" value of 0 to mean that the counter isn't present on the current
switch revision, and skip it from the preparation of bulk regions.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: felix: use ocelot's ndo_get_stats64 method

Move the logic from the ocelot switchdev driver's ocelot_get_stats64()
method to the common switch lib and reuse it for the DSA driver.

Signed-o

net: dsa: felix: use ocelot's ndo_get_stats64 method

Move the logic from the ocelot switchdev driver's ocelot_get_stats64()
method to the common switch lib and reuse it for the DSA driver.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: move stats code to ocelot_stats.c

The main C file of the ocelot switch lib, ocelot.c, is getting larger
and larger, and there are plans to add more logic related to stats.
So it s

net: mscc: ocelot: move stats code to ocelot_stats.c

The main C file of the ocelot switch lib, ocelot.c, is getting larger
and larger, and there are plans to add more logic related to stats.
So it seems like an appropriate moment to split the statistics code to a
new file.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...