|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
| #
a4588634 |
| 20-Oct-2020 |
Joel Stanley <joel@jms.id.au> |
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when ru
net: ftgmac100: Ensure tx descriptor updates are visible
We must ensure the tx descriptor updates are visible before updating
the tx pointer.
This resolves the tx hangs observed on the 2600 when running iperf:
root@ast2600:~# iperf3 -c 192.168.86.146 -R
Connecting to host 192.168.86.146, port 5201
Reverse mode, remote host 192.168.86.146 is sending
[ 5] local 192.168.86.173 port 43886 connected to 192.168.86.146 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 90.7 MBytes 760 Mbits/sec
[ 5] 1.00-2.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 2.00-3.00 sec 91.7 MBytes 770 Mbits/sec
[ 5] 3.00-4.00 sec 91.7 MBytes 769 Mbits/sec
[ 5] 4.00-5.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 5.00-6.00 sec 91.8 MBytes 771 Mbits/sec
[ 5] 6.00-7.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 7.00-8.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 8.00-9.00 sec 91.3 MBytes 766 Mbits/sec
[ 5] 9.00-10.00 sec 91.9 MBytes 771 Mbits/sec
[ 5] 10.00-11.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 11.00-12.00 sec 91.8 MBytes 770 Mbits/sec
[ 5] 12.00-13.00 sec 90.6 MBytes 761 Mbits/sec
[ 5] 13.00-14.00 sec 45.2 KBytes 370 Kbits/sec
[ 5] 14.00-15.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 15.00-16.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 16.00-17.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 17.00-18.00 sec 0.00 Bytes 0.00 bits/sec
[ 67.031671] ------------[ cut here ]------------
[ 67.036870] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x2dc/0x300
[ 67.046123] NETDEV WATCHDOG: eth2 (ftgmac100): transmit queue 0 timed out
OpenBMC-Staging-Count: 8
Fixes: 52c0cae87465 ("ftgmac100: Remove tx descriptor accessors")
Link: https://lore.kernel.org/r/20201020220639.130696-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|