net: dsa: mv88e6xxx: prefix Global Monitor Control macros

Prefix and document the Global Monitor Control Register macros
(which became the Global Monitor & MGMT Control Register with 88E

net: dsa: mv88e6xxx: prefix Global Monitor Control macros

Prefix and document the Global Monitor Control Register macros
(which became the Global Monitor & MGMT Control Register with 88E6390)
and give a clear 16-bit registers representation.

Use __bf_shf to get the shift value at compile time instead of adding
new defined macros for it.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: prefix Global Control macros

Prefix and document the Global Control and Control 2 registers macros
and give a clear 16-bit registers representation.

Signed-

net: dsa: mv88e6xxx: prefix Global Control macros

Prefix and document the Global Control and Control 2 registers macros
and give a clear 16-bit registers representation.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: prefix Global Switch MAC macros

Prefix and document the Global Switch MAC Address Register macros and
give clear 16-bit register representation.

At the same

net: dsa: mv88e6xxx: prefix Global Switch MAC macros

Prefix and document the Global Switch MAC Address Register macros and
give clear 16-bit register representation.

At the same time, move mv88e6xxx_g1_set_switch_mac in global1.c, where
it belongs.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: prefix Global Status macros

Prefix and document the Global Status Register macros and give clear
16-bit register representation.

Signed-off-by: Vivien Didel

net: dsa: mv88e6xxx: prefix Global Status macros

Prefix and document the Global Status Register macros and give clear
16-bit register representation.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: rename chip header

The mv88e6xxx.h is meant to contains the chip structures and data.
Rename it to chip.h, as for other source/header pairs of the driver.

A

net: dsa: mv88e6xxx: rename chip header

The mv88e6xxx.h is meant to contains the chip structures and data.
Rename it to chip.h, as for other source/header pairs of the driver.

At the same time, ensure that relative header inclusions are separated
by a newline and sorted alphabetically.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: fix copyright holder

I do not hold the copyright of the DSA core and drivers source files,
since these changes have been written as an initiative of my day job.
Fix this.

net: dsa: fix copyright holder

I do not hold the copyright of the DSA core and drivers source files,
since these changes have been written as an initiative of my day job.
Fix this.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: add PPU operations

Some Marvell chips can enable/disable the PPU on demand. This is needed
to access the PHY registers when there is no indirection mechanism.

net: dsa: mv88e6xxx: add PPU operations

Some Marvell chips can enable/disable the PPU on demand. This is needed
to access the PHY registers when there is no indirection mechanism.

Add two new ppu_enable and ppu_disable ops to describe this and finally
get rid of the MV88E6XXX_FLAG_PPU* flags.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: add a soft reset operation

Marvell chips have different way to issue a software reset.

Old chips (such as 88E6060) have a reset bit in an ATU control register.

net: dsa: mv88e6xxx: add a soft reset operation

Marvell chips have different way to issue a software reset.

Old chips (such as 88E6060) have a reset bit in an ATU control register.

Newer chips moved this bit in a Global control register. Chips with
controllable PPU should reset the PPU when resetting the switch.

Add a new reset operation to implement these differences and introduce a
mv88e6xxx_software_reset() helper to wrap it conveniently.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: Reserved Management frames to CPU

Older devices have a couple of registers in global2. The mv88e6390
family has a single register in global1 behind which hides simil

net: dsa: mv88e6xxx: Reserved Management frames to CPU

Older devices have a couple of registers in global2. The mv88e6390
family has a single register in global1 behind which hides similar
configuration. Implement and op for this.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: Monitor and Management tables

The mv88e6390 changes the monitor control register into the Monitor
and Management control, which is an indirection register to various

net: dsa: mv88e6xxx: Monitor and Management tables

The mv88e6390 changes the monitor control register into the Monitor
and Management control, which is an indirection register to various
registers.

Add ops to set the CPU port and the ingress/egress port for both
register layouts, to global1

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: Move g1 stats code in global1.[ch]

Move the stats functions which access global 1 registers into
global1.c.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>

net: dsa: mv88e6xxx: Move g1 stats code in global1.[ch]

Move the stats functions which access global 1 registers into
global1.c.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: Add mv88e6390 statistics unit init

The statistics unit on the mv88e6390 needs the histogram mode to be
configured in a different register compared to other devices.

net: dsa: mv88e6xxx: Add mv88e6390 statistics unit init

The statistics unit on the mv88e6390 needs the histogram mode to be
configured in a different register compared to other devices. Add an
ops to do this.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
v2:
Rename to mv88e6390_g1_stats_set_histogram
Move into global1.c
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: Add mv88e6390 stats snapshot operation

The MV88E6390 has a control register for what the histogram statistics
actually contain. This means the stat_snapshot method s

net: dsa: mv88e6xxx: Add mv88e6390 stats snapshot operation

The MV88E6390 has a control register for what the histogram statistics
actually contain. This means the stat_snapshot method should not set
this information. So implement the 6390 stats_snapshot function without
these bits.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: Abstract stats_snapshot into ops structure

Taking a stats snapshot differs between same families. Abstract this
into an ops member. At the same time, move the code i

net: dsa: mv88e6xxx: Abstract stats_snapshot into ops structure

Taking a stats snapshot differs between same families. Abstract this
into an ops member. At the same time, move the code into global1.[ch],
since the registers are in the global1 range.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: mv88e6xxx: add global1 helpers

The Global (1) internal SMI device is an extended set of registers
containing ATU, PPU, VTU, STU, etc.

It is present on every switches,

net: dsa: mv88e6xxx: add global1 helpers

The Global (1) internal SMI device is an extended set of registers
containing ATU, PPU, VTU, STU, etc.

It is present on every switches, usually at SMI address 0x1B. But old
models such as 88E6060 access it at address 0xF, thus using REG_GLOBAL
is erroneous.

Add a global1_addr info member used by mv88e6xxx_g1_{read,write} and
mv88e6xxx_g1_wait helpers in a new global1.c file.

This patch finally removes _mv88e6xxx_reg_{read,write}, in favor on the
appropriate helpers. No functional changes here.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...