Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
97fb5e8d |
| 29-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6 |
|
#
5db1e1fc |
| 27-Mar-2019 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: qcom: define get_dctrl_cfg
This patch defines get_dctrl_cfg callback for qcom variant. qcom variant has a specific block size definition.
Signed-off-by: Ludovic Barre <ludovic.barre@st.c
mmc: mmci: qcom: define get_dctrl_cfg
This patch defines get_dctrl_cfg callback for qcom variant. qcom variant has a specific block size definition.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
#
ea27c95a |
| 06-Mar-2019 |
Ulf Hansson <ulf.hansson@linaro.org> |
mmc: mmci: Re-work code starting DMA for the qcom variant
Having mmci_dmae_start() to invoke the shared function, dml_start_xfer(), explicitly for the qcom variant isn't very nice. Let's clean up th
mmc: mmci: Re-work code starting DMA for the qcom variant
Having mmci_dmae_start() to invoke the shared function, dml_start_xfer(), explicitly for the qcom variant isn't very nice. Let's clean up this code by moving the qcom specific parts into the qcom ->dma_start() callback and then drop dml_start_xfer() altogether.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
c21aa7a8 |
| 06-Mar-2019 |
Ulf Hansson <ulf.hansson@linaro.org> |
mmc: mmci: Drop unnecessary clear of variant->qcom_dml flag
There's no point clearing the variant flag in case the qcom variant fails to setup DMA. This is because if mmci_dma_setup() fails, then th
mmc: mmci: Drop unnecessary clear of variant->qcom_dml flag
There's no point clearing the variant flag in case the qcom variant fails to setup DMA. This is because if mmci_dma_setup() fails, then the use_dma flag remains set to false, which leads to mmci using PIO mode and not DMA.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13 |
|
#
cfccc6ac |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add dma_error callback
This patch adds dma_error callback at mmci_host_ops to allow to call specific variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hanss
mmc: mmci: add dma_error callback
This patch adds dma_error callback at mmci_host_ops to allow to call specific variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
5a9f10c3 |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add dma_finalize callback
This patch adds dma_finalize callback at mmci_host_ops to allow to call specific variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf
mmc: mmci: add dma_finalize callback
This patch adds dma_finalize callback at mmci_host_ops to allow to call specific variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
135ea30e |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add dma_start callback
This patch adds dma_start callback to mmci_host_ops. Create a generic mmci_dma_start function which regroup common action between variant.
Signed-off-by: Ludovic B
mmc: mmci: add dma_start callback
This patch adds dma_start callback to mmci_host_ops. Create a generic mmci_dma_start function which regroup common action between variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
02769968 |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add get_next_data callback
This patch adds get_next_data callback to mmci_host_ops. Generic mmci_get_next_data factorizes next_cookie check and the host ops call.
Signed-off-by: Ludovic
mmc: mmci: add get_next_data callback
This patch adds get_next_data callback to mmci_host_ops. Generic mmci_get_next_data factorizes next_cookie check and the host ops call.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
47983510 |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add prepare/unprepare_data callbacks
This patch adds prepare/unprepare callbacks to mmci_host_ops. Like this mmci_pre/post_request can be generic, mmci_prepare_data and mmci_unprepare_dat
mmc: mmci: add prepare/unprepare_data callbacks
This patch adds prepare/unprepare callbacks to mmci_host_ops. Like this mmci_pre/post_request can be generic, mmci_prepare_data and mmci_unprepare_data provide common next_cookie management.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
c3647fdc |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: create common mmci_dma_setup/release
This patch creates a common mmci_dma_setup/release which calls dma_setup/release callbacks of mmci_host_ops and manages common features like use_dma..
mmc: mmci: create common mmci_dma_setup/release
This patch creates a common mmci_dma_setup/release which calls dma_setup/release callbacks of mmci_host_ops and manages common features like use_dma... If there is a fallbacks to pio mode, dma functions must check use_dma.
error management: -mmci_dmae_setup fail if Tx and Rx dma channels are not defined -qcom_dma_setup fail if one of both dma channels is not defined, Qcom has no specific resource to release, just mmci dmae resource.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7 |
|
#
29aba07a |
| 16-Jul-2018 |
Ulf Hansson <ulf.hansson@linaro.org> |
mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
As a first step to improve the variant specific code for mmci, add a ->dma_setup() callback to the struct mmci_host_ops.
To show i
mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
As a first step to improve the variant specific code for mmci, add a ->dma_setup() callback to the struct mmci_host_ops.
To show its use, let's deploy the callback for the qcom dml, which involves also to the assign the mmci_host_ops pointer from the variant ->init() callback.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ludovic Barre <ludovic.barre@st.com>
show more ...
|
Revision tags: v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2 |
|
#
183b8021 |
| 27-Feb-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
scripts/spelling.txt: add "intialization" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
intialization||initialization
The "inintialization" in drive
scripts/spelling.txt: add "intialization" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:
intialization||initialization
The "inintialization" in drivers/acpi/spcr.c is a different pattern but I fixed it as well in this commit.
Link: http://lkml.kernel.org/r/1481573103-11329-16-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16 |
|
#
9cb15142 |
| 28-Jul-2014 |
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
mmc: mmci: Add qcom dml support to the driver.
On Qualcomm APQ8064 SOCs, SD card controller has an additional glue called DML (Data Mover Local/Lite) to assist dma transfers. This hardware needs to
mmc: mmci: Add qcom dml support to the driver.
On Qualcomm APQ8064 SOCs, SD card controller has an additional glue called DML (Data Mover Local/Lite) to assist dma transfers. This hardware needs to be setup before any dma transfer is requested. DML itself is not a DMA engine, its just a gule between the SD card controller and dma controller.
Most of this code has been ported from qualcomm's 3.4 kernel.
This patch adds the code necessary to intialize the hardware and setup before doing any dma transfers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
97fb5e8d |
| 29-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6 |
|
#
5db1e1fc |
| 27-Mar-2019 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: qcom: define get_dctrl_cfg This patch defines get_dctrl_cfg callback for qcom variant. qcom variant has a specific block size definition. Signed-off-by: Ludovic Barre
mmc: mmci: qcom: define get_dctrl_cfg This patch defines get_dctrl_cfg callback for qcom variant. qcom variant has a specific block size definition. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
#
ea27c95a |
| 06-Mar-2019 |
Ulf Hansson <ulf.hansson@linaro.org> |
mmc: mmci: Re-work code starting DMA for the qcom variant Having mmci_dmae_start() to invoke the shared function, dml_start_xfer(), explicitly for the qcom variant isn't very nice. Let's
mmc: mmci: Re-work code starting DMA for the qcom variant Having mmci_dmae_start() to invoke the shared function, dml_start_xfer(), explicitly for the qcom variant isn't very nice. Let's clean up this code by moving the qcom specific parts into the qcom ->dma_start() callback and then drop dml_start_xfer() altogether. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
#
c21aa7a8 |
| 06-Mar-2019 |
Ulf Hansson <ulf.hansson@linaro.org> |
mmc: mmci: Drop unnecessary clear of variant->qcom_dml flag There's no point clearing the variant flag in case the qcom variant fails to setup DMA. This is because if mmci_dma_setup() fa
mmc: mmci: Drop unnecessary clear of variant->qcom_dml flag There's no point clearing the variant flag in case the qcom variant fails to setup DMA. This is because if mmci_dma_setup() fails, then the use_dma flag remains set to false, which leads to mmci using PIO mode and not DMA. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13 |
|
#
cfccc6ac |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add dma_error callback This patch adds dma_error callback at mmci_host_ops to allow to call specific variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
mmc: mmci: add dma_error callback This patch adds dma_error callback at mmci_host_ops to allow to call specific variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
5a9f10c3 |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add dma_finalize callback This patch adds dma_finalize callback at mmci_host_ops to allow to call specific variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com
mmc: mmci: add dma_finalize callback This patch adds dma_finalize callback at mmci_host_ops to allow to call specific variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
135ea30e |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add dma_start callback This patch adds dma_start callback to mmci_host_ops. Create a generic mmci_dma_start function which regroup common action between variant.
mmc: mmci: add dma_start callback This patch adds dma_start callback to mmci_host_ops. Create a generic mmci_dma_start function which regroup common action between variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
02769968 |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add get_next_data callback This patch adds get_next_data callback to mmci_host_ops. Generic mmci_get_next_data factorizes next_cookie check and the host ops call.
mmc: mmci: add get_next_data callback This patch adds get_next_data callback to mmci_host_ops. Generic mmci_get_next_data factorizes next_cookie check and the host ops call. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
47983510 |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: add prepare/unprepare_data callbacks This patch adds prepare/unprepare callbacks to mmci_host_ops. Like this mmci_pre/post_request can be generic, mmci_prepare_data and mm
mmc: mmci: add prepare/unprepare_data callbacks This patch adds prepare/unprepare callbacks to mmci_host_ops. Like this mmci_pre/post_request can be generic, mmci_prepare_data and mmci_unprepare_data provide common next_cookie management. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
c3647fdc |
| 08-Oct-2018 |
Ludovic Barre <ludovic.barre@st.com> |
mmc: mmci: create common mmci_dma_setup/release This patch creates a common mmci_dma_setup/release which calls dma_setup/release callbacks of mmci_host_ops and manages common feature
mmc: mmci: create common mmci_dma_setup/release This patch creates a common mmci_dma_setup/release which calls dma_setup/release callbacks of mmci_host_ops and manages common features like use_dma... If there is a fallbacks to pio mode, dma functions must check use_dma. error management: -mmci_dmae_setup fail if Tx and Rx dma channels are not defined -qcom_dma_setup fail if one of both dma channels is not defined, Qcom has no specific resource to release, just mmci dmae resource. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7 |
|
#
29aba07a |
| 16-Jul-2018 |
Ulf Hansson <ulf.hansson@linaro.org> |
mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml As a first step to improve the variant specific code for mmci, add a ->dma_setup() callback to the struct mmci_host_ops
mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml As a first step to improve the variant specific code for mmci, add a ->dma_setup() callback to the struct mmci_host_ops. To show its use, let's deploy the callback for the qcom dml, which involves also to the assign the mmci_host_ops pointer from the variant ->init() callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ludovic Barre <ludovic.barre@st.com>
show more ...
|
Revision tags: v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2 |
|
#
183b8021 |
| 27-Feb-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
scripts/spelling.txt: add "intialization" pattern and fix typo instances Fix typos and add the following to the scripts/spelling.txt: intialization||initialization The "i
scripts/spelling.txt: add "intialization" pattern and fix typo instances Fix typos and add the following to the scripts/spelling.txt: intialization||initialization The "inintialization" in drivers/acpi/spcr.c is a different pattern but I fixed it as well in this commit. Link: http://lkml.kernel.org/r/1481573103-11329-16-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|