media: rc-core: rename ir_raw_event_reset to ir_raw_event_overflow

The driver report a reset event when the hardware reports and overflow.
There is no reason to have a generic "reset" event.

Signed

media: rc-core: rename ir_raw_event_reset to ir_raw_event_overflow

The driver report a reset event when the hardware reports and overflow.
There is no reason to have a generic "reset" event.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: rc: harmonize infrared durations to microseconds

rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,

media: rc: harmonize infrared durations to microseconds

rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.

Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.

Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.

This affects:
- rx_resolution member of struct rc_dev
- timeout member of struct rc_dev
- duration member in struct ir_raw_event

Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: rc: decoders do not need to check for transitions

Drivers should never produce consecutive pulse or space raw events. Should
that occur, we would have bigger problems than this code is trying

media: rc: decoders do not need to check for transitions

Drivers should never produce consecutive pulse or space raw events. Should
that occur, we would have bigger problems than this code is trying to
guard against.

Note that we already log an error should a driver misbehave.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

show more ...

media: rc: set timeout to smallest value required by enabled protocols

The longer the IR timeout, the longer the rc device waits until delivering
the trailing space. So, by reducing this timeout, we

media: rc: set timeout to smallest value required by enabled protocols

The longer the IR timeout, the longer the rc device waits until delivering
the trailing space. So, by reducing this timeout, we reduce the delay for
the last scancode to be delivered.

Note that the lirc daemon disables all protocols, in which case we revert
back to the default value.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: rc: replace IR_dprintk() with dev_dbg in IR decoders

Use dev_dbg() rather than custom debug function.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@

media: rc: replace IR_dprintk() with dev_dbg in IR decoders

Use dev_dbg() rather than custom debug function.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: rc: do not remove first bit if leader pulse is present

The rc5 protocol does not have a leading pulse or space, but we encode
the first bit using a single leading pulse. For other protocols,

media: rc: do not remove first bit if leader pulse is present

The rc5 protocol does not have a leading pulse or space, but we encode
the first bit using a single leading pulse. For other protocols, the
leading pulse or space does not represent any bit. So, don't remove the
first bit if a leading pulse is present.

Cc: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: rc: clean up leader pulse/space for manchester encoding

The IR rc6 encoder sends the header using manchester encoding using 0
bits, which causes the following:

UBSAN: Undefined behaviour in

media: rc: clean up leader pulse/space for manchester encoding

The IR rc6 encoder sends the header using manchester encoding using 0
bits, which causes the following:

UBSAN: Undefined behaviour in drivers/media/rc/rc-ir-raw.c:247:6
shift exponent 4294967295 is too large for 64-bit type 'long long unsigned int'

So, allow the leader code to send a pulse and space and remove the unused
pulse_space_start field.

Cc: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: lirc: use the correct carrier for scancode transmit

If the lirc device supports it, set the carrier for the protocol.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho

media: lirc: use the correct carrier for scancode transmit

If the lirc device supports it, set the carrier for the protocol.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: rc: add SPDX identifiers to the code I wrote

As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now usi

media: rc: add SPDX identifiers to the code I wrote

As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*

RC_TYPE is confusing and it's just the protocol. So rename it.

Suggested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-of

media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*

RC_TYPE is confusing and it's just the protocol. So rename it.

Suggested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] rc: ir-rc5-decoder: Add encode capability

Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events.

The Manchester modulation helper is used, and for RC-5X it is used tw

[media] rc: ir-rc5-decoder: Add encode capability

Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events.

The Manchester modulation helper is used, and for RC-5X it is used twice
with two sets of timings, the first with a short trailer space for the
space in the middle, and the second with no leader so that it can
continue the space.

The encoding in RC-5-SZ first inserts a pulse and then simply utilizes
the generic Manchester encoder available in rc-core.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] rc5x: document that this is the 20 bit variant

There are many variants of extended rc5. This implements the 20 bit
version.

Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <dav

[media] rc5x: document that this is the 20 bit variant

There are many variants of extended rc5. This implements the 20 bit
version.

Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] rc5x: 6th command bit is S2 bit

The 2nd stop bit in rc5 is reused as an inverted 6th command bit in
20 bits rc5x. Currently the rc5x decoder sets the 6th command bit as
an inverted duplicate

[media] rc5x: 6th command bit is S2 bit

The 2nd stop bit in rc5 is reused as an inverted 6th command bit in
20 bits rc5x. Currently the rc5x decoder sets the 6th command bit as
an inverted duplicate of the lowest system bit; as a result we do
not have all the command bits.

Note that there are no rc5x keymaps present.

Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] Fix RC5 decoding with Fintek CIR chipset

Fix RC5 decoding with Fintek CIR chipset

Commit e87b540be2dd02552fb9244d50ae8b4e4619a34b tightened up the RC5
decoding by adding a check for trailin

[media] Fix RC5 decoding with Fintek CIR chipset

Fix RC5 decoding with Fintek CIR chipset

Commit e87b540be2dd02552fb9244d50ae8b4e4619a34b tightened up the RC5
decoding by adding a check for trailing silence to ensure a valid RC5
command had been received. Unfortunately the trailer length checked was
10 units and the Fintek CIR device does not want to provide details of a
space longer than 6350us. This meant that RC5 remotes working on a
Fintek setup on 3.16 failed on 3.17 and later. Fix this by shortening
the trailer check to 6 units (allowing for a previous space in the
received remote command).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117221

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Cc: stable@vger.kernel.org
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] media: rc: move check whether a protocol is enabled to the core

Checking whether a protocol is enabled and calling the related decoder
functions should be done by the rc core, not the protoc

[media] media: rc: move check whether a protocol is enabled to the core

Checking whether a protocol is enabled and calling the related decoder
functions should be done by the rc core, not the protocol handlers.

Properly handle lirc considering that no protocol bit is set for lirc.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

Revert "[media] rc: ir-rc5-decoder: Add encode capability"

This reverts commit a0466f15b4654cf1ac9e387d7c1a401eff494b4f.

The current code is not mature enough, the API should allow a single
protoco

Revert "[media] rc: ir-rc5-decoder: Add encode capability"

This reverts commit a0466f15b4654cf1ac9e387d7c1a401eff494b4f.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] rc: ir-rc5-decoder: Add encode capability

Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events. The protocol is chosen based on the specified protocol mask,
and wheth

[media] rc: ir-rc5-decoder: Add encode capability

Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events. The protocol is chosen based on the specified protocol mask,
and whether all the required bits are set in the scancode mask, and
none of the unused bits are set in the scancode data. For example a
scancode filter with bit 16 set in both data and mask is unambiguously
RC-5X.

The Manchester modulation helper is used, and for RC-5X it is used twice
with two sets of timings, the first with a short trailer space for the
space in the middle, and the second with no leader so that it can
continue the space.

The encoding in RC-5-SZ first inserts a pulse and then simply utilizes
the generic Manchester encoder available in rc-core.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding

Changeset e87b540be2dd broke RC5-SZ decoding, as it forgot to add
the extra bit check for the enabled protocols at the beginning of
the logic.

Sig

[media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding

Changeset e87b540be2dd broke RC5-SZ decoding, as it forgot to add
the extra bit check for the enabled protocols at the beginning of
the logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] ir-rc5-decoder: print where decoding fails

The IR dprintk message that prints a RC5 decoding failure
is not much helpful, as it doesn't tell on what bit the
error occurred.

Add such informa

[media] ir-rc5-decoder: print where decoding fails

The IR dprintk message that prints a RC5 decoding failure
is not much helpful, as it doesn't tell on what bit the
error occurred.

Add such information, in order to make the debug message
more useful.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

show more ...

[media] rc-core: merge rc5 and streamzap decoders

Now that the protocol is part of the scancode, it is pretty easy to merge
the rc5 and streamzap decoders. An additional advantage is that the decode

[media] rc-core: merge rc5 and streamzap decoders

Now that the protocol is part of the scancode, it is pretty easy to merge
the rc5 and streamzap decoders. An additional advantage is that the decoder
is now stricter as it waits for the trailing silence before determining that
a command is a valid rc5/streamzap command (which avoids collisions that I've
seen with e.g. Sony protocols).

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

show more ...

[media] rc-core: remove protocol arrays

The basic API of rc-core used to be:

dev = rc_allocate_device();
dev->x = a;
dev->y = b;
dev->z = c;
rc_register_device();

which is a pretty common pat

[media] rc-core: remove protocol arrays

The basic API of rc-core used to be:

dev = rc_allocate_device();
dev->x = a;
dev->y = b;
dev->z = c;
rc_register_device();

which is a pretty common pattern in the kernel, after the introduction of
protocol arrays the API looks something like:

dev = rc_allocate_device();
dev->x = a;
rc_set_allowed_protocols(dev, RC_BIT_X);
dev->z = c;
rc_register_device();

There's no real need for the protocols to be an array, so change it
back to be consistent (and in preparation for the following patches).

[m.chehab@samsung.com: added missing changes at some files]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

show more ...

[media] rc-core: document the protocol type

Right now the protocol information is not preserved, rc-core gets handed a
scancode but has no idea which protocol it corresponds to.

This patch (which r

[media] rc-core: document the protocol type

Right now the protocol information is not preserved, rc-core gets handed a
scancode but has no idea which protocol it corresponds to.

This patch (which required reading through the source/keymap for all drivers,
not fun) makes the protocol information explicit which is important
documentation and makes it easier to e.g. support multiple protocols with one
decoder (think rc5 and rc-streamzap). The information isn't used yet so there
should be no functional changes.

[m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

show more ...

[media] rc: abstract access to allowed/enabled protocols

The allowed and enabled protocol masks need to be expanded to be per
filter type in order to support wakeup filter protocol selection. To
eas

[media] rc: abstract access to allowed/enabled protocols

The allowed and enabled protocol masks need to be expanded to be per
filter type in order to support wakeup filter protocol selection. To
ease that process abstract access to the rc_dev::allowed_protos and
rc_dev::enabled_protocols members with inline functions.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

show more ...

[media, edac] Change my email address

There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new add

[media, edac] Change my email address

There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

show more ...

[media] rc-core: don't treat dev->rc_map.rc_type as a bitmap

store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for
two reasons. First of all, it is pretty bogus to change the p

[media] rc-core: don't treat dev->rc_map.rc_type as a bitmap

store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for
two reasons. First of all, it is pretty bogus to change the protocol type of
the keymap just because the hardware has been asked to decode a different
protocol.
Second, dev->rc_map.rc_type is an enum (i.e. a single protocol) as pointed
out by James Hogan <james.hogan@imgtec.com>.
Fix both issues by introducing a separate enabled_protocols member to
struct rc_dev.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

show more ...