media: imx: Unstage the imx8mq-mipi-csi2 driver

The imx8mq-mipi-csi2 MIPI CSI-2 receiver driver is used and maintained.
There is no reason to keep it in staging. The accompanying CSI bridge
driver t

media: imx: Unstage the imx8mq-mipi-csi2 driver

The imx8mq-mipi-csi2 MIPI CSI-2 receiver driver is used and maintained.
There is no reason to keep it in staging. The accompanying CSI bridge
driver that uses it is in drivers/media/platform/nxp as well.

One TODO is to get rid of csi_state's "state" and "lock" variables.
Especially make sure suspend/resume is working without them. That can
very well be worked on from the new location.

Also add a MAINTAINERS section for the imx8mq-mipi-csi2 mipi receiver
driver.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: nxp: Add i.MX8 ISI driver

The Image Sensing Interface (ISI) combines image processing pipelines
with DMA engines to process and capture frames originating from a
variety of sources. The input

media: nxp: Add i.MX8 ISI driver

The Image Sensing Interface (ISI) combines image processing pipelines
with DMA engines to process and capture frames originating from a
variety of sources. The inputs to the ISI go through Pixel Link
interfaces, and their number and nature is SoC-dependent. They cover
both capture interfaces (MIPI CSI-2 RX, HDMI RX) and memory inputs.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mn-beacon
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: imx: Unstage the imx7-media-csi driver

The imx7-media-csi driver, currently in staging, is ready for
prime-time. The staging TODO file lists a few items specific to that
driver, that are alre

media: imx: Unstage the imx7-media-csi driver

The imx7-media-csi driver, currently in staging, is ready for
prime-time. The staging TODO file lists a few items specific to that
driver, that are already addressed (the "all of the above" part) or can
be addressed later:

- The frame interval monitoring support is a software mechanism to
monitor the device for unexpected stalls, and should be part of the
V4L2 core if desired.

- Restricting the support media bus formats based on the SoC integration
only aims at reducing userspace confusion by not enumerating options
that are known not to be possible, it won't cause regressions if
handled later.

Move the description of the media bus format restriction TODO item to
the driver, drop the other TODO items, and move the driver out of
staging.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: fsl-viu: deprecate this driver

Deprecate the fsl-viu driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.

We want to get rid of

media: fsl-viu: deprecate this driver

Deprecate the fsl-viu driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.

We want to get rid of these old drivers, so deprecated it for future
removal.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: dw100: Add i.MX8MP dw100 dewarper driver

Add a V4L2 mem-to-mem driver for the Vivante DW100 Dewarp Processor IP
core found on i.MX8MP SoC.

The processor core applies a programmable geometric

media: dw100: Add i.MX8MP dw100 dewarper driver

Add a V4L2 mem-to-mem driver for the Vivante DW100 Dewarp Processor IP
core found on i.MX8MP SoC.

The processor core applies a programmable geometrical transformation on
input images to correct distorsion introduced by lenses.
The transformation function is exposed as a grid map with 16x16 pixel
macroblocks indexed using X, Y vertex coordinates.

The dewarping map can be set from application through a dedicated v4l2
control. If not set or invalid, the driver computes an identity map
prior to starting the processing engine.

The driver supports scaling, cropping and pixel format conversion.

Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: platform: place NXP drivers on a separate dir

In order to cleanup the main platform media directory, move NXP
drivers to their own directory.

Reviewed-by: Laurent Pinchart <laurent.pinchart@

media: platform: place NXP drivers on a separate dir

In order to cleanup the main platform media directory, move NXP
drivers to their own directory.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...