Revision tags: v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46 |
|
#
9e0bf839 |
| 16-Jun-2021 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: i2c: max9271: Introduce wake_up() function
The MAX9271 chip manual prescribes a delay of 5 milliseconds after the chip exits from low power state.
Add a new function to the max9271 library d
media: i2c: max9271: Introduce wake_up() function
The MAX9271 chip manual prescribes a delay of 5 milliseconds after the chip exits from low power state.
Add a new function to the max9271 library driver that wakes up the chip with a dummy i2c transaction and implements the correct delay of 5 milliseconds after the chip exits from low power state.
Use the newly introduced function in the rdacm20 and rdacm21 camera drivers. The former was not respecting the required delay while the latter was waiting for a too-short timeout.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|
#
ad01032a |
| 16-Jun-2021 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: i2c: max9271: Check max9271_write() return
Check the return value of the max9271_write() function in the max9271 library driver.
While at it, modify an existing condition to be made identica
media: i2c: max9271: Check max9271_write() return
Check the return value of the max9271_write() function in the max9271 library driver.
While at it, modify an existing condition to be made identical to other checks.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|
Revision tags: v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16 |
|
#
ce79aecf |
| 10-Feb-2021 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: i2c: max9271: Add MODULE_* macros
Since commit 7f03d9fefcc5 ("media: i2c: Kconfig: Make MAX9271 a module") the max9271 library is built as a module but no MODULE_*() attributes were specified
media: i2c: max9271: Add MODULE_* macros
Since commit 7f03d9fefcc5 ("media: i2c: Kconfig: Make MAX9271 a module") the max9271 library is built as a module but no MODULE_*() attributes were specified, causing a build error due to missing license information.
ERROR: modpost: missing MODULE_LICENSE() in drivers/media/i2c/max9271.o
Fix this by adding MODULE attributes to the driver.
Fixes: 7f03d9fefcc5 ("media: i2c: Kconfig: Make MAX9271 a module") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|
Revision tags: v5.10.15, v5.10.14, v5.10 |
|
#
909a0a18 |
| 20-Nov-2020 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: max9271: Fix GPIO enable/disable
Fix GPIO enable/disable operations which wrongly read the 0x0f register to obtain the current mask of the enabled lines instead of using the correct 0x0e regi
media: max9271: Fix GPIO enable/disable
Fix GPIO enable/disable operations which wrongly read the 0x0f register to obtain the current mask of the enabled lines instead of using the correct 0x0e register.
Also fix access to bit 0 of the register which is marked as reserved.
Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|
#
978649ab |
| 20-Nov-2020 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: max9271: Fix GPIO enable/disable
[ Upstream commit 909a0a189c677307edd461e21fd962784370d27f ]
Fix GPIO enable/disable operations which wrongly read the 0x0f register to obtain the current ma
media: max9271: Fix GPIO enable/disable
[ Upstream commit 909a0a189c677307edd461e21fd962784370d27f ]
Fix GPIO enable/disable operations which wrongly read the 0x0f register to obtain the current mask of the enabled lines instead of using the correct 0x0e register.
Also fix access to bit 0 of the register which is marked as reserved.
Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47 |
|
#
34009bff |
| 12-Jun-2020 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: i2c: Add RDACM20 driver
The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer.
The GMSL
media: i2c: Add RDACM20 driver
The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer.
The GMSL link carries power, control (I2C) and video data over a single coax cable.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|
#
978649ab |
| 20-Nov-2020 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: max9271: Fix GPIO enable/disable [ Upstream commit 909a0a189c677307edd461e21fd962784370d27f ] Fix GPIO enable/disable operations which wrongly read the 0x0f register to o
media: max9271: Fix GPIO enable/disable [ Upstream commit 909a0a189c677307edd461e21fd962784370d27f ] Fix GPIO enable/disable operations which wrongly read the 0x0f register to obtain the current mask of the enabled lines instead of using the correct 0x0e register. Also fix access to bit 0 of the register which is marked as reserved. Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47 |
|
#
34009bff |
| 12-Jun-2020 |
Jacopo Mondi <jacopo+renesas@jmondi.org> |
media: i2c: Add RDACM20 driver The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serial
media: i2c: Add RDACM20 driver The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer. The GMSL link carries power, control (I2C) and video data over a single coax cable. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|