Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44 |
|
#
da57d120 |
| 03-Aug-2023 |
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
smatch reports:
drivers/media/i2c/ds90ub960.c:1788 ub960_init_tx_ports() error: uninitialized symbol 'pll_div'.
This is caused by 'pll_d
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
smatch reports:
drivers/media/i2c/ds90ub960.c:1788 ub960_init_tx_ports() error: uninitialized symbol 'pll_div'.
This is caused by 'pll_div' not being set for 1200 MHz CSI rate. Set the 'pll_div' correctly.
Closes: https://lore.kernel.org/all/8d6daeb1-b62a-bbb2-b840-8759c84f2085@xs4all.nl/
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver") Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
show more ...
|
Revision tags: v6.1.43 |
|
#
093d69ad |
| 31-Jul-2023 |
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
media: i2c: ds90ub960: Rename RXPORT_MODE_CSI2_ASYNC to RXPORT_MODE_CSI2_NONSYNC
FPD-Link has an operating mode that used to be called "asynchronous" in the hardware documentation, but that has been
media: i2c: ds90ub960: Rename RXPORT_MODE_CSI2_ASYNC to RXPORT_MODE_CSI2_NONSYNC
FPD-Link has an operating mode that used to be called "asynchronous" in the hardware documentation, but that has been changed to non-synchronous already quite a while back. The ub960 driver still had one instance of the old naming, so let's rename it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
show more ...
|
#
05428f66 |
| 31-Jul-2023 |
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
media: i2c: ds90ub960: Allow FPD-Link async mode
Allow using FPD-Link in async mode. The driver handles it correctly, but the mode was blocked at probe time as there wasn't HW to test this with. Now
media: i2c: ds90ub960: Allow FPD-Link async mode
Allow using FPD-Link in async mode. The driver handles it correctly, but the mode was blocked at probe time as there wasn't HW to test this with. Now the mode has been tested, and it works.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
show more ...
|
#
b57a5fd2 |
| 31-Jul-2023 |
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
media: i2c: ds90ub960: Configure CSI-2 continuous clock
Use 'clock-noncontinuous' from DT to configure the continuous/non-continuous clock setting for the TX ports.
Signed-off-by: Tomi Valkeinen <t
media: i2c: ds90ub960: Configure CSI-2 continuous clock
Use 'clock-noncontinuous' from DT to configure the continuous/non-continuous clock setting for the TX ports.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
show more ...
|
Revision tags: v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14 |
|
#
b8ec754a |
| 23-Feb-2023 |
Sakari Ailus <sakari.ailus@linux.intel.com> |
media: v4l: async: Set v4l2_device and subdev in async notifier init
Set the v4l2_device already in async notifier init, so struct device related to it will be available before the notifier is regis
media: v4l: async: Set v4l2_device and subdev in async notifier init
Set the v4l2_device already in async notifier init, so struct device related to it will be available before the notifier is registered. This requires separating notifier initialisation into two functions, one that takes v4l2_device as its argument, v4l2_async_nf_init and v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the notifier will use a single function, v4l2_async_nf_register.
This is done in order to make struct device available earlier, during construction of the async connections, for sensible debug prints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
show more ...
|
Revision tags: v6.1.13, v6.2 |
|
#
adb2dcd5 |
| 16-Feb-2023 |
Sakari Ailus <sakari.ailus@linux.intel.com> |
media: v4l: async: Rename v4l2_async_subdev as v4l2_async_connection
Rename v4l2_async_subdev as v4l2_async_connection, in order to differentiate between the sub-devices and their connections: one s
media: v4l: async: Rename v4l2_async_subdev as v4l2_async_connection
Rename v4l2_async_subdev as v4l2_async_connection, in order to differentiate between the sub-devices and their connections: one sub-device can have many connections but the V4L2 async framework has so far allowed just a single one. Connections in this context will later translate into either MC ancillary or data links.
This patch prepares changing that relation by changing existing users of v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices themselves will not be needed anymore
Additionally, __v4l2_async_nf_add_subdev() has been renamed __v4l2_async_nf_add_connection().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
show more ...
|
#
f2183847 |
| 18-Jul-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
media: ds90ub9xx: switch three more drivers back to use struct i2c_driver::probe()
struct i2c_driver::probe_new() is about to go away. Since I converted all drivers below drivers/media use struct i2
media: ds90ub9xx: switch three more drivers back to use struct i2c_driver::probe()
struct i2c_driver::probe_new() is about to go away. Since I converted all drivers below drivers/media use struct i2c_driver::probe, three more drivers were added in the following commits that use .probe_new():
commit 6363db1c9d45 ("media: i2c: add DS90UB953 driver") commit c158d0d4ff15 ("media: i2c: add DS90UB913 driver") commit afe267f2d368 ("media: i2c: add DS90UB960 driver")
Switch these driver to use the probe callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: use proper commit description style]
show more ...
|
#
4b9fbbd5 |
| 18-Jul-2023 |
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> |
media: i2c: ds90ub960: fix error handling in ub960_rxport_add_serializer()
Smatch warns: drivers/media/i2c/ds90ub960.c:1671 ub960_rxport_add_serializer(): err: 'rxport->ser.client' dereferencing p
media: i2c: ds90ub960: fix error handling in ub960_rxport_add_serializer()
Smatch warns: drivers/media/i2c/ds90ub960.c:1671 ub960_rxport_add_serializer(): err: 'rxport->ser.client' dereferencing possible ERR_PTR()
i2c_new_client_device() returns error pointers on failure and in dev_dbg statement we are dereferencing error pointer which is a bug.
Fix this by using IS_ERR() which checks for error pointers.
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
show more ...
|
#
afe267f2 |
| 19-Jun-2023 |
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
media: i2c: add DS90UB960 driver
Add driver for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchen
media: i2c: add DS90UB960 driver
Add driver for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
show more ...
|