|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33 |
|
| #
05bdb996 |
| 08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: replace fmode_t with a block-specific type for block open flags
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE.
block: replace fmode_t with a block-specific type for block open flags
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
show more ...
|
|
Revision tags: v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24 |
|
| #
3664ff82 |
| 09-Apr-2023 |
Yangtao Li <frank.li@vivo.com> |
dm: add helper macro for simple DM target module init and exit
Eliminate duplicate boilerplate code for simple modules that contain
a single DM target driver without any additional setup code.
Add
dm: add helper macro for simple DM target module init and exit
Eliminate duplicate boilerplate code for simple modules that contain
a single DM target driver without any additional setup code.
Add a new module_dm() macro, which replaces the module_init() and
module_exit() with template functions that call dm_register_target()
and dm_unregister_target() respectively.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
show more ...
|
|
Revision tags: v6.1.23, v6.1.22, v6.1.21 |
|
| #
b362c733 |
| 18-Mar-2023 |
Yangtao Li <frank.li@vivo.com> |
dm: push error reporting down to dm_register_target()
Simplifies each DM target's init method by making dm_register_target()
responsible for its error reporting (on behalf of targets).
Signed-off-b
dm: push error reporting down to dm_register_target()
Simplifies each DM target's init method by making dm_register_target()
responsible for its error reporting (on behalf of targets).
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
show more ...
|
|
Revision tags: v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11 |
|
| #
1c131886 |
| 06-Feb-2023 |
Heinz Mauelshagen <heinzm@redhat.com> |
dm: prefer '"%s...", __func__'
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Revision tags: v6.1.10 |
|
| #
0ef0b471 |
| 01-Feb-2023 |
Heinz Mauelshagen <heinzm@redhat.com> |
dm: add missing empty lines
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
| #
02f10ba1 |
| 01-Feb-2023 |
Heinz Mauelshagen <heinzm@redhat.com> |
dm: add argument identifier names
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Revision tags: v6.1.9 |
|
| #
a4a82ce3 |
| 26-Jan-2023 |
Heinz Mauelshagen <heinzm@redhat.com> |
dm: correct block comments format.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
| #
86a3238c |
| 25-Jan-2023 |
Heinz Mauelshagen <heinzm@redhat.com> |
dm: change "unsigned" to "unsigned int"
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Revision tags: v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49 |
|
| #
9ae6e8b1 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving th
dm era: commit metadata in postsuspend after worker stops
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
show more ...
|
|
Revision tags: v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14 |
|
| #
6dcbb52c |
| 18-Oct-2021 |
Christoph Hellwig <hch@lst.de> |
dm: use bdev_nr_sectors and bdev_nr_bytes instead of open coding them
Use the proper helpers to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <kee
dm: use bdev_nr_sectors and bdev_nr_bytes instead of open coding them
Use the proper helpers to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ac0a5f70 |
| 21-Jun-2022 |
Nikos Tsironis <ntsironis@arrikto.com> |
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Com
dm era: commit metadata in postsuspend after worker stops
commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|