Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61 |
|
#
de9f8a91 |
| 16-Aug-2022 |
Robin Murphy <robin.murphy@arm.com> |
iommu/dma: Clean up Kconfig
Although iommu-dma is a per-architecture chonce, that is currently implemented in a rather haphazard way. Selecting from the arch Kconfig was the original logical approac
iommu/dma: Clean up Kconfig
Although iommu-dma is a per-architecture chonce, that is currently implemented in a rather haphazard way. Selecting from the arch Kconfig was the original logical approach, but is complicated by having to manage dependencies; conversely, selecting from drivers ends up hiding the architecture dependency *too* well. Instead, let's just have it enable itself automatically when IOMMU API support is enabled for the relevant architectures. It can't get much clearer than that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/2e33c8bc2b1bb478157b7964bfed976cb7466139.1660668998.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
show more ...
|
Revision tags: v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
c9b258c6 |
| 15-Dec-2020 |
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> |
iommu/amd: Prepare for generic IO page table framework
Add initial hook up code to implement generic IO page table framework.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Li
iommu/amd: Prepare for generic IO page table framework
Add initial hook up code to implement generic IO page table framework.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20201215073705.123786-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7 |
|
#
e52d58d5 |
| 03-Sep-2020 |
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> |
iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the
iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the IRTE so that the upper and lower 64-bit values can be updated safely.
However, this creates a small window, where the interrupt could arrive and result in IO_PAGE_FAULT (for interrupt) as shown below.
IOMMU Driver Device IRQ ============ =========== irte.RemapEn=0 ... change IRTE IRQ from device ==> IO_PAGE_FAULT !! ... irte.RemapEn=1
This scenario has been observed when changing irq affinity on a system running I/O-intensive workload, in which the destination APIC ID in the IRTE is updated.
Instead, use cmpxchg_double() to update the 128-bit IRTE at once without disabling the interrupt remapping. However, this means several features, which require GA (128-bit IRTE) support will also be affected if cmpxchg16b is not supported (which is unprecedented for AMD processors w/ IOMMU).
Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure") Reported-by: Sean Osborne <sean.m.osborne@oracle.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
show more ...
|
Revision tags: v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7 |
|
#
cbe94c6e |
| 30-Jun-2020 |
Jerry Snitselaar <jsnitsel@redhat.com> |
iommu/amd: Move Kconfig and Makefile bits down into amd directory
Move AMD Kconfig and Makefile bits down into the amd directory with the rest of the AMD specific files.
Signed-off-by: Jerry Snitse
iommu/amd: Move Kconfig and Makefile bits down into amd directory
Move AMD Kconfig and Makefile bits down into the amd directory with the rest of the AMD specific files.
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20200630200636.48600-3-jsnitsel@redhat.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7 |
|
#
e52d58d5 |
| 03-Sep-2020 |
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> |
iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it
iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the IRTE so that the upper and lower 64-bit values can be updated safely. However, this creates a small window, where the interrupt could arrive and result in IO_PAGE_FAULT (for interrupt) as shown below. IOMMU Driver Device IRQ ============ =========== irte.RemapEn=0 ... change IRTE IRQ from device ==> IO_PAGE_FAULT !! ... irte.RemapEn=1 This scenario has been observed when changing irq affinity on a system running I/O-intensive workload, in which the destination APIC ID in the IRTE is updated. Instead, use cmpxchg_double() to update the 128-bit IRTE at once without disabling the interrupt remapping. However, this means several features, which require GA (128-bit IRTE) support will also be affected if cmpxchg16b is not supported (which is unprecedented for AMD processors w/ IOMMU). Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure") Reported-by: Sean Osborne <sean.m.osborne@oracle.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
show more ...
|
Revision tags: v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7 |
|
#
cbe94c6e |
| 30-Jun-2020 |
Jerry Snitselaar <jsnitsel@redhat.com> |
iommu/amd: Move Kconfig and Makefile bits down into amd directory Move AMD Kconfig and Makefile bits down into the amd directory with the rest of the AMD specific files. Signed-
iommu/amd: Move Kconfig and Makefile bits down into amd directory Move AMD Kconfig and Makefile bits down into the amd directory with the rest of the AMD specific files. Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20200630200636.48600-3-jsnitsel@redhat.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
show more ...
|