Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30 |
|
#
d8bde56d |
| 17-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
Input: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 (
Input: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517164645.162294-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23 |
|
#
1661f60a |
| 02-Apr-2023 |
Benjamin Bara <benjamin.bara@skidata.com> |
Input: tsc2007 - enable cansleep pendown GPIO
When a hard IRQ is triggered, the soft IRQ, which decides if an actual pen down happened, should always be triggered. This enables the usage of "can_sle
Input: tsc2007 - enable cansleep pendown GPIO
When a hard IRQ is triggered, the soft IRQ, which decides if an actual pen down happened, should always be triggered. This enables the usage of "can_sleep" GPIO chips as "pen down" GPIO, as the value is not read during the hard IRQ anymore. This might be the case if the GPIO chip is an expander behind i2c.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80 |
|
#
4e9d70a9 |
| 18-Nov-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
Input: tsc2007_core - Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kl
Input: tsc2007_core - Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-264-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24 |
|
#
e512a9e9 |
| 15-Mar-2021 |
Andy Shevchenko <andy.shevchenko@gmail.com> |
Input: tsc2007 - make use of device properties
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property
Input: tsc2007 - make use of device properties
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210314210951.645783-2-andy.shevchenko@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
#
cee451c9 |
| 15-Mar-2021 |
Andy Shevchenko <andy.shevchenko@gmail.com> |
Input: tsc2007 - convert to GPIO descriptors
This converts the driver to use GPIO descriptors.
Note that it now uses logical polarity and thus nagation has been dropped.
Signed-off-by: Andy Shevch
Input: tsc2007 - convert to GPIO descriptors
This converts the driver to use GPIO descriptors.
Note that it now uses logical polarity and thus nagation has been dropped.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210314210951.645783-1-andy.shevchenko@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8 |
|
#
d2912cb1 |
| 04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
8fd70815 |
| 22-May-2017 |
Wolfram Sang <wsa@the-dreams.de> |
Input: tsc2007 - move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Input: tsc2007 - move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1 |
|
#
db4572ff |
| 23-Feb-2017 |
H. Nikolaus Schaller <hns@goldelico.com> |
Input: tsc2007 - correctly report pressure and not resistance to user space
Previously, tsc2007 would report as ABS_PRESSURE: 0 for no pressure (resistance infinite) high value for
Input: tsc2007 - correctly report pressure and not resistance to user space
Previously, tsc2007 would report as ABS_PRESSURE: 0 for no pressure (resistance infinite) high value for soft pressure (high resistance) low value for firm pressure (lower resistance)
This does not matter for most applications (e.g. GUI, Menu, Scrolling etc.) where the ABS_PRESSURE is ignored and only BTN_TOUCH is processed to detect screen taps.
Only some special graphics applications read the pressure channel and they will be mixed up by this non-monotonic relation.
So we fix it to become: 0 for no pressure (resistance infinite) low value for soft pressure (high resistance) high value for firm pressure (lower resistance)
While this patch changes the values reported to userspace, ABS_PRESSURE is used rarely by userspace. Most software only relies on BTN_TOUCH (boolean), which is not affected by this patch. Some graphics software makes use of the interface and does not work correctly with the currently used inverted behaviour.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
#
deec586d |
| 23-Feb-2017 |
H. Nikolaus Schaller <hns@goldelico.com> |
Input: tsc2007 - rename function tsc2007_calculate_pressure
Rename tsc2007_calculate_pressure to tsc2007_calculate_resistance because that is what it does.
Signed-off-by: H. Nikolaus Schaller <hns@
Input: tsc2007 - rename function tsc2007_calculate_pressure
Rename tsc2007_calculate_pressure to tsc2007_calculate_resistance because that is what it does.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v4.10 |
|
#
c61ebe83 |
| 17-Feb-2017 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: tsc2007 - switch to using input_set_capability()
Do not manipulate evbits/keybits directly, use helper for that.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
f1443404 |
| 17-Feb-2017 |
H. Nikolaus Schaller <hns@goldelico.com> |
Input: tsc2007 - add iio interface to read external ADC input and temperature
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used f
Input: tsc2007 - add iio interface to read external ADC input and temperature
The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y or =m in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8 |
|
#
d2912cb1 |
| 04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
8fd70815 |
| 22-May-2017 |
Wolfram Sang <wsa@the-dreams.de> |
Input: tsc2007 - move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang
Input: tsc2007 - move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1 |
|
#
db4572ff |
| 23-Feb-2017 |
H. Nikolaus Schaller <hns@goldelico.com> |
Input: tsc2007 - correctly report pressure and not resistance to user space Previously, tsc2007 would report as ABS_PRESSURE: 0 for no pressure (resistance infinite) hig
Input: tsc2007 - correctly report pressure and not resistance to user space Previously, tsc2007 would report as ABS_PRESSURE: 0 for no pressure (resistance infinite) high value for soft pressure (high resistance) low value for firm pressure (lower resistance) This does not matter for most applications (e.g. GUI, Menu, Scrolling etc.) where the ABS_PRESSURE is ignored and only BTN_TOUCH is processed to detect screen taps. Only some special graphics applications read the pressure channel and they will be mixed up by this non-monotonic relation. So we fix it to become: 0 for no pressure (resistance infinite) low value for soft pressure (high resistance) high value for firm pressure (lower resistance) While this patch changes the values reported to userspace, ABS_PRESSURE is used rarely by userspace. Most software only relies on BTN_TOUCH (boolean), which is not affected by this patch. Some graphics software makes use of the interface and does not work correctly with the currently used inverted behaviour. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
#
deec586d |
| 23-Feb-2017 |
H. Nikolaus Schaller <hns@goldelico.com> |
Input: tsc2007 - rename function tsc2007_calculate_pressure Rename tsc2007_calculate_pressure to tsc2007_calculate_resistance because that is what it does. Signed-off-by: H. Nik
Input: tsc2007 - rename function tsc2007_calculate_pressure Rename tsc2007_calculate_pressure to tsc2007_calculate_resistance because that is what it does. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|
Revision tags: v4.10 |
|
#
c61ebe83 |
| 17-Feb-2017 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: tsc2007 - switch to using input_set_capability() Do not manipulate evbits/keybits directly, use helper for that. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
#
f1443404 |
| 17-Feb-2017 |
H. Nikolaus Schaller <hns@goldelico.com> |
Input: tsc2007 - add iio interface to read external ADC input and temperature The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which c
Input: tsc2007 - add iio interface to read external ADC input and temperature The tsc2007 chip not only has a resistive touch screen controller but also an external AUX adc imput which can be used for an ambient light sensor, battery voltage monitoring or any general purpose. Additionally it can measure the chip temperature. This extension provides an iio interface for these adc channels. Since it is not wasting much resources and is very straightforward, we simply provide all other adc channels as optional iio interfaces as weel. This can be used for debugging or special applications. This patch also splits the tsc2007 driver in several source files: tsc2007.h -- constants, structs and stubs tsc2007_core.c -- functional parts of the original driver tsc2007_iio.c -- the optional iio stuff Makefile magic allows to conditionally link the iio stuff if CONFIG_IIO=y or =m in a way that it works with CONFIG_TOUCHSCREEN_TSC2007=m. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
show more ...
|