Input: add imx-keypad driver to support the IMX Keypad Port

The IMX family of Application Processors is shipped with a Keypad Port
supported by this driver.

The peripheral can control up to an 8x8

Input: add imx-keypad driver to support the IMX Keypad Port

The IMX family of Application Processors is shipped with a Keypad Port
supported by this driver.

The peripheral can control up to an 8x8 matrix key pad where all the
scanning is done via software. The hardware provides two interrupts:
one for key presses (KDI) and one for all key releases (KRI). There is
also a simple circuit for glitch reduction (said for synchronization)
made by two series of 3 D-latches clocked by the keypad-clock that
stabilize the interrupts sources. KDI and KRI are fired only if the
respective conditions are maintained for at last 4 keypad-clock cycle.

Since those circuits are poor for a correct debounce process (the
keypad-clock frequency is 32K and bounces longer than 94us are not
masked) the driver, when an interrupt arrives, samples the matrix
with a period of 10ms until the readins are stable for
IMX_KEYPAD_SCANS_FOR_STABILITY times (currently set at 3). After
getting stable result appropriate events are sent through the input
stack.

If some keys are maintained pressed, the driver continues to scan
the matrix with a longer period (60ms) to catch possible multiple
key presses without overloading the cpu. This process ends when all
keys are released.

This driver is tested to build in kernel or as a module and follow
the specification of Freescale Application processors:
i.MX25 i.MX27 i.MX31 i.MX35 i.MX51 especially tested on i.MX31.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: ADP5588 - add support for ADP5587 devices

The ADP5587 is quite similar to the ADP5588 but features a greater I/O
voltage range and lacks the Dual Light Sensor Interface. This new part
is als

Input: ADP5588 - add support for ADP5587 devices

The ADP5587 is quite similar to the ADP5588 but features a greater I/O
voltage range and lacks the Dual Light Sensor Interface. This new part
is also supported by this driver.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

input/keyboard: new driver for ADP5520 MFD PMICs

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@g

input/keyboard: new driver for ADP5520 MFD PMICs

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

show more ...

Input: add DaVinci Keypad Driver

This driver enables keypad support on DaVinci platforms. DM365 is the
only platform that uses this driver at the moment.

Signed-off-by: Miguel Aguilar <miguel.aguil

Input: add DaVinci Keypad Driver

This driver enables keypad support on DaVinci platforms. DM365 is the
only platform that uses this driver at the moment.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add driver for Atmel AT42QT2160 Sensor Chip

This version only supports individual cells (no slide support yet).
The code has been tested on proprietary development ARM board, but
should work

Input: add driver for Atmel AT42QT2160 Sensor Chip

This version only supports individual cells (no slide support yet).
The code has been tested on proprietary development ARM board, but
should work fine on other machines.

Signed-off-by: Raphael Derosso Pereira <raphaelpereira@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add driver for Maxim MAX7359 key switch controller

The Maxim MAX7359 is a I2C interfaced key switch controller which
provides microprocessors with management of up to 64 key switches.
This pa

Input: add driver for Maxim MAX7359 key switch controller

The Maxim MAX7359 is a I2C interfaced key switch controller which
provides microprocessors with management of up to 64 key switches.
This patch adds support for the MAX7359 key switch controller.

Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add driver for ADP5588 QWERTY I2C Keypad

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@ge

Input: add driver for ADP5588 QWERTY I2C Keypad

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add driver for OpenCores Keyboard Controller

Driver for the keyboard hardware documented here:
http://www.opencores.org/project,keyboardcontroller

Signed-off-by: Javier Herrero <jherrero@hv

Input: add driver for OpenCores Keyboard Controller

Driver for the keyboard hardware documented here:
http://www.opencores.org/project,keyboardcontroller

Signed-off-by: Javier Herrero <jherrero@hvsistemas.es>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add twl4030_keypad driver

Add a driver for the keypad controller on TWL4030 family chips.
These support up to an 8x8 key matrix. The TWL4030 multifunction
chips are mostly used on OMAP3 (or

Input: add twl4030_keypad driver

Add a driver for the keypad controller on TWL4030 family chips.
These support up to an 8x8 key matrix. The TWL4030 multifunction
chips are mostly used on OMAP3 (or OMAP 2430) based boards.

[dtor@mail.ru: switch to matrix-keypad framework, fix changing
keymap from userspace]
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add keypad driver for w90p910

Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Trilok Soni <soni.t

Input: add keypad driver for w90p910

Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: combine hil_kbd and hil_ptr drivers

hil_kbd and hil_ptr look like twins so it makes sense to combine them
into a single driver.

[deller@gmx.de: add MODULE_ALIAS() entry for mouse]
Tested-by:

Input: combine hil_kbd and hil_ptr drivers

hil_kbd and hil_ptr look like twins so it makes sense to combine them
into a single driver.

[deller@gmx.de: add MODULE_ALIAS() entry for mouse]
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add support for generic GPIO-based matrix keypad

Original patch by Marek Vasut, modified by Eric in:

1. use delayed work to simplify the debouncing
2. combine col_polarity/row_polarity into

Input: add support for generic GPIO-based matrix keypad

Original patch by Marek Vasut, modified by Eric in:

1. use delayed work to simplify the debouncing
2. combine col_polarity/row_polarity into a single active_low field
3. use a generic bit array based XOR algorithm to detect key
press/release, which should make the column assertion time
shorter and code a bit cleaner
4. remove the ALT_FN handling, which is no way generic, the ALT_FN
key should be treated as no different from other keys, and
translation will be done by user space by commands like 'loadkeys'.
5. explicitly disable row IRQs and flush potential pending work,
and schedule an immediate scan after resuming as suggested
by Uli Luckas
6. incorporate review comments from many others

Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad
controller, I have to configure those pins as generic GPIO to use this
driver, works quite well, though), and Sharp Zaurus model SL-C7x0
and SL-C1000.

[dtor@mail.ru: fix error unwinding path, support changing keymap
from userspace]
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Reviewed-by: Uli Luckas <u.luckas@road.de>
Reviewed-by: Russell King <linux@arm.linux.org.uk>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: arrange keyboards alphabetically

Hopefully it will reduce conflicts when merging patches.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: introduce lm8323 keypad driver

lm8323 is the keypad driver used in n810 device.

[akpm@linux-foundation.org: coding-style fixes]
[dtor@mail.ru: various cleanups]
Signed-off-by: Felipe Balbi <

Input: introduce lm8323 keypad driver

lm8323 is the keypad driver used in n810 device.

[akpm@linux-foundation.org: coding-style fixes]
[dtor@mail.ru: various cleanups]
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add matrix keypad driver for Cirrus EP93xx

This is a keyboard driver for the Cirrus Logic EP93xx keypad matrix
peripheral. This driver is based on the pxa27x_keypad driver.

[dtor@mail.ru: Pl

Input: add matrix keypad driver for Cirrus EP93xx

This is a keyboard driver for the Cirrus Logic EP93xx keypad matrix
peripheral. This driver is based on the pxa27x_keypad driver.

[dtor@mail.ru: Plug in input_dev->keycode so keymap can be changed
from userspace.]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

x86: allow more than 8 cpus to be used on 32-bit

X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.

This also cleans up a few spurious references to X86_PC in the
driver s

x86: allow more than 8 cpus to be used on 32-bit

X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.

This also cleans up a few spurious references to X86_PC in the
driver space - those certainly should be X86.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

show more ...

Input: add support for enhanced rotary controller on pxa930 and pxa935

Signed-off-by: Yong Yao <yaoyong@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <

Input: add support for enhanced rotary controller on pxa930 and pxa935

Signed-off-by: Yong Yao <yaoyong@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

sh: SuperH KEYSC platform driver

Add a platform driver for the SuperH KEYSC block. The driver expects to get
mode, timing information and keypad layout from the board code as platform
data. The bo

sh: SuperH KEYSC platform driver

Add a platform driver for the SuperH KEYSC block. The driver expects to get
mode, timing information and keypad layout from the board code as platform
data. The board code is resonsible for pin configuration.

Both sh7343 and sh7722 should be supported, but only the sh7722 processor has
been tested so far. SH_KEYSC_MODE_3 is yet to be tested.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

show more ...

Input: pxa27x_keypad - also enable on PXA3xx

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)

The controller should really be called keypad, and also align
the naming of functions and structures to use "pxa27x_keypad"
as prefix,

Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)

The controller should really be called keypad, and also align
the naming of functions and structures to use "pxa27x_keypad"
as prefix, instead of "pxakbd".

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add Tosa keyboard driver

Add keyboard support on tosa (Sharp Zaurus SL-6000x).
Largely based on patches by Dirk Opfer.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: D

Input: add Tosa keyboard driver

Add keyboard support on tosa (Sharp Zaurus SL-6000x).
Largely based on patches by Dirk Opfer.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: improve Kconfig help entries for HP Jornada devices

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: bf54x-keys - keypad does not exist on BF544 parts

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Dmitry Torokhov <dt

Input: bf54x-keys - keypad does not exist on BF544 parts

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add support for Blackfin BF54x Keypad controller

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Dmitry Torokhov <

Input: add support for Blackfin BF54x Keypad controller

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: add support for SEGA Dreamcast keyboard

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail

Input: add support for SEGA Dreamcast keyboard

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...