1# 2# Input core configuration 3# 4menuconfig INPUT_KEYBOARD 5 bool "Keyboards" if EMBEDDED || !X86 6 default y 7 help 8 Say Y here, and a list of supported keyboards will be displayed. 9 This option doesn't affect the kernel. 10 11 If unsure, say Y. 12 13if INPUT_KEYBOARD 14 15config KEYBOARD_ATKBD 16 tristate "AT keyboard" if EMBEDDED || !X86_PC 17 default y 18 select SERIO 19 select SERIO_LIBPS2 20 select SERIO_I8042 if X86_PC 21 select SERIO_GSCPS2 if GSC 22 help 23 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually 24 you'll need this, unless you have a different type keyboard (USB, ADB 25 or other). This also works for AT and PS/2 keyboards connected over a 26 PS/2 to serial converter. 27 28 If unsure, say Y. 29 30 To compile this driver as a module, choose M here: the 31 module will be called atkbd. 32 33config KEYBOARD_ATKBD_HP_KEYCODES 34 bool "Use HP keyboard scancodes" 35 depends on PARISC && KEYBOARD_ATKBD 36 default y 37 help 38 Say Y here if you have a PA-RISC machine and want to use an AT or 39 PS/2 keyboard, and your keyboard uses keycodes that are specific to 40 PA-RISC keyboards. 41 42 Say N if you use a standard keyboard. 43 44config KEYBOARD_ATKBD_RDI_KEYCODES 45 bool "Use PrecisionBook keyboard scancodes" 46 depends on KEYBOARD_ATKBD_HP_KEYCODES 47 default n 48 help 49 If you have an RDI PrecisionBook, say Y here if you want to use its 50 built-in keyboard (as opposed to an external keyboard). 51 52 The PrecisionBook has five keys that conflict with those used by most 53 AT and PS/2 keyboards. These are as follows: 54 55 PrecisionBook Standard AT or PS/2 56 57 F1 F12 58 Left Ctrl Left Alt 59 Caps Lock Left Ctrl 60 Right Ctrl Caps Lock 61 Left 102nd key (the key to the right of Left Shift) 62 63 If you say N here, and use the PrecisionBook keyboard, then each key 64 in the left-hand column will be interpreted as the corresponding key 65 in the right-hand column. 66 67 If you say Y here, and use an external keyboard, then each key in the 68 right-hand column will be interpreted as the key shown in the 69 left-hand column. 70 71config KEYBOARD_SUNKBD 72 tristate "Sun Type 4 and Type 5 keyboard" 73 select SERIO 74 help 75 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, 76 connected either to the Sun keyboard connector or to an serial 77 (RS-232) port via a simple adapter. 78 79 To compile this driver as a module, choose M here: the 80 module will be called sunkbd. 81 82config KEYBOARD_LKKBD 83 tristate "DECstation/VAXstation LK201/LK401 keyboard" 84 select SERIO 85 help 86 Say Y here if you want to use a LK201 or LK401 style serial 87 keyboard. This keyboard is also useable on PCs if you attach 88 it with the inputattach program. The connector pinout is 89 described within lkkbd.c. 90 91 To compile this driver as a module, choose M here: the 92 module will be called lkkbd. 93 94config KEYBOARD_LOCOMO 95 tristate "LoCoMo Keyboard Support" 96 depends on SHARP_LOCOMO && INPUT_KEYBOARD 97 help 98 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA 99 100 To compile this driver as a module, choose M here: the 101 module will be called locomokbd. 102 103config KEYBOARD_XTKBD 104 tristate "XT keyboard" 105 select SERIO 106 help 107 Say Y here if you want to use the old IBM PC/XT keyboard (or 108 compatible) on your system. This is only possible with a 109 parallel port keyboard adapter, you cannot connect it to the 110 keyboard port on a PC that runs Linux. 111 112 To compile this driver as a module, choose M here: the 113 module will be called xtkbd. 114 115config KEYBOARD_NEWTON 116 tristate "Newton keyboard" 117 select SERIO 118 help 119 Say Y here if you have a Newton keyboard on a serial port. 120 121 To compile this driver as a module, choose M here: the 122 module will be called newtonkbd. 123 124config KEYBOARD_STOWAWAY 125 tristate "Stowaway keyboard" 126 select SERIO 127 help 128 Say Y here if you have a Stowaway keyboard on a serial port. 129 Stowaway compatible keyboards like Dicota Input-PDA keyboard 130 are also supported by this driver. 131 132 To compile this driver as a module, choose M here: the 133 module will be called stowaway. 134 135config KEYBOARD_CORGI 136 tristate "Corgi keyboard" 137 depends on PXA_SHARPSL 138 default y 139 help 140 Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 141 series of PDAs. 142 143 To compile this driver as a module, choose M here: the 144 module will be called corgikbd. 145 146config KEYBOARD_SPITZ 147 tristate "Spitz keyboard" 148 depends on PXA_SHARPSL 149 default y 150 help 151 Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, 152 SL-C3000 and Sl-C3100 series of PDAs. 153 154 To compile this driver as a module, choose M here: the 155 module will be called spitzkbd. 156 157config KEYBOARD_TOSA 158 tristate "Tosa keyboard" 159 depends on MACH_TOSA 160 default y 161 help 162 Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) 163 164 To compile this driver as a module, choose M here: the 165 module will be called tosakbd. 166 167config KEYBOARD_TOSA_USE_EXT_KEYCODES 168 bool "Tosa keyboard: use extended keycodes" 169 depends on KEYBOARD_TOSA 170 default n 171 help 172 Say Y here to enable the tosa keyboard driver to generate extended 173 (>= 127) keycodes. Be aware, that they can't be correctly interpreted 174 by either console keyboard driver or by Kdrive keybd driver. 175 176 Say Y only if you know, what you are doing! 177 178config KEYBOARD_AMIGA 179 tristate "Amiga keyboard" 180 depends on AMIGA 181 help 182 Say Y here if you are running Linux on any AMIGA and have a keyboard 183 attached. 184 185 To compile this driver as a module, choose M here: the 186 module will be called amikbd. 187 188config ATARI_KBD_CORE 189 bool 190 191config KEYBOARD_ATARI 192 tristate "Atari keyboard" 193 depends on ATARI 194 select ATARI_KBD_CORE 195 help 196 Say Y here if you are running Linux on any Atari and have a keyboard 197 attached. 198 199 To compile this driver as a module, choose M here: the 200 module will be called atakbd. 201 202config KEYBOARD_HIL_OLD 203 tristate "HP HIL keyboard support (simple driver)" 204 depends on GSC || HP300 205 default y 206 help 207 The "Human Interface Loop" is a older, 8-channel USB-like 208 controller used in several Hewlett Packard models. This driver 209 was adapted from the one written for m68k/hp300, and implements 210 support for a keyboard attached to the HIL port, but not for 211 any other types of HIL input devices like mice or tablets. 212 However, it has been thoroughly tested and is stable. 213 214 If you want full HIL support including support for multiple 215 keyboards, mice, and tablets, you have to enable the 216 "HP System Device Controller i8042 Support" in the input/serio 217 submenu. 218 219config KEYBOARD_HIL 220 tristate "HP HIL keyboard support" 221 depends on GSC || HP300 222 default y 223 select HP_SDC 224 select HIL_MLC 225 select SERIO 226 help 227 The "Human Interface Loop" is a older, 8-channel USB-like 228 controller used in several Hewlett Packard models. 229 This driver implements support for HIL-keyboards attached 230 to your machine, so normally you should say Y here. 231 232config KEYBOARD_HP6XX 233 tristate "HP Jornada 6xx keyboard" 234 depends on SH_HP6XX 235 select INPUT_POLLDEV 236 help 237 Say Y here if you have a HP Jornada 620/660/680/690 and want to 238 support the built-in keyboard. 239 240 To compile this driver as a module, choose M here: the 241 module will be called jornada680_kbd. 242 243config KEYBOARD_HP7XX 244 tristate "HP Jornada 7xx keyboard" 245 depends on SA1100_JORNADA720_SSP && SA1100_SSP 246 help 247 Say Y here if you have a HP Jornada 710/720/728 and want to 248 support the built-in keyboard. 249 250 To compile this driver as a module, choose M here: the 251 module will be called jornada720_kbd. 252 253config KEYBOARD_OMAP 254 tristate "TI OMAP keypad support" 255 depends on (ARCH_OMAP1 || ARCH_OMAP2) 256 help 257 Say Y here if you want to use the OMAP keypad. 258 259 To compile this driver as a module, choose M here: the 260 module will be called omap-keypad. 261 262config KEYBOARD_PXA27x 263 tristate "PXA27x keyboard support" 264 depends on PXA27x 265 help 266 Enable support for PXA27x matrix keyboard controller 267 268 To compile this driver as a module, choose M here: the 269 module will be called pxa27x_keyboard. 270 271config KEYBOARD_AAED2000 272 tristate "AAED-2000 keyboard" 273 depends on MACH_AAED2000 274 select INPUT_POLLDEV 275 default y 276 help 277 Say Y here to enable the keyboard on the Agilent AAED-2000 278 development board. 279 280 To compile this driver as a module, choose M here: the 281 module will be called aaed2000_kbd. 282 283config KEYBOARD_GPIO 284 tristate "GPIO Buttons" 285 depends on GENERIC_GPIO 286 help 287 This driver implements support for buttons connected 288 to GPIO pins of various CPUs (and some other chips). 289 290 Say Y here if your device has buttons connected 291 directly to such GPIO pins. Your board-specific 292 setup logic must also provide a platform device, 293 with configuration data saying which GPIOs are used. 294 295 To compile this driver as a module, choose M here: the 296 module will be called gpio-keys. 297 298config KEYBOARD_MAPLE 299 tristate "Maple bus keyboard" 300 depends on SH_DREAMCAST && MAPLE 301 help 302 Say Y here if you have a Dreamcast console running Linux and have 303 a keyboard attached to its Maple bus. 304 305 To compile this driver as a module, choose M here: the 306 module will be called maple_keyb. 307 308config KEYBOARD_BFIN 309 tristate "Blackfin BF54x keypad support" 310 depends on (BF54x && !BF544) 311 help 312 Say Y here if you want to use the BF54x keypad. 313 314 To compile this driver as a module, choose M here: the 315 module will be called bf54x-keys. 316 317endif 318