IB/hfi1: Replace 1-element array with singleton

Zero-length arrays are deprecated[1] and are being replaced with flexible
array members in support of the ongoing efforts to tighten the
FORTIFY_SOURC

IB/hfi1: Replace 1-element array with singleton

Zero-length arrays are deprecated[1] and are being replaced with flexible
array members in support of the ongoing efforts to tighten the
FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing
with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3.

Replace zero-length array with flexible-array member "lvs" in struct
opa_port_data_counters_msg and struct opa_port_error_counters64_msg.

Additionally, the "port" member of several structs is defined as a
single-element, but is only ever accessed at index 0. Replace it with a
singleton so that flexible array usage is sane.

This results in no differences in binary output.

[1] https://github.com/KSPP/linux/issues/78

Link: https://lore.kernel.org/r/20221118215847.never.416-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

RDMA/hfi1: Convert to SPDX identifier

use SPDX-License-Identifier instead of a verbose license text

Link: https://lore.kernel.org/r/20210823042622.109-1-caihuoqing@baidu.com
Signed-off-by: Cai Huoq

RDMA/hfi1: Convert to SPDX identifier

use SPDX-License-Identifier instead of a verbose license text

Link: https://lore.kernel.org/r/20210823042622.109-1-caihuoqing@baidu.com
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

RDMA: Support more than 255 rdma ports

Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows u

RDMA: Support more than 255 rdma ports

Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.

With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.

When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.

The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely

Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.

While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),

Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

RDMA/hw/hfi1/mad: Demote half-completed kernel-doc header fix another

Fixes the following W=1 kernel build warning(s):

drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member

RDMA/hw/hfi1/mad: Demote half-completed kernel-doc header fix another

Fixes the following W=1 kernel build warning(s):

drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'am' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'data' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'resp_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'max_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'local_mad' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_size' not described in 'hfi1_process_mad'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_pkey_index' not described in 'hfi1_process_mad'

Link: https://lore.kernel.org/r/20210126124732.3320971-5-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

IB/hfi1: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with the
new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through mark

IB/hfi1: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with the
new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7-rc7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Link: https://lore.kernel.org/r/20200721133455.GA14363@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

RDMA: Replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
vari

RDMA: Replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Link: https://lore.kernel.org/r/20200213010425.GA13068@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> # added a few more

show more ...

RDMA: Change MAD processing function to remove extra casting and parameter

All users of process_mad() converts input pointers from ib_mad_hdr to be
ib_mad, update the function declaration to use ib_

RDMA: Change MAD processing function to remove extra casting and parameter

All users of process_mad() converts input pointers from ib_mad_hdr to be
ib_mad, update the function declaration to use ib_mad directly.

Also remove not used input MAD size parameter.

Link: https://lore.kernel.org/r/20191029062745.7932-17-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-By: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/hfi1: Delete unreachable code

All callers allocate MAD structures with proper sizes, there is no need to
recheck it.

Link: https://lore.kernel.org/r/20191029062745.7932-8-leon@kernel.org
Signe

RDMA/hfi1: Delete unreachable code

All callers allocate MAD structures with proper sizes, there is no need to
recheck it.

Link: https://lore.kernel.org/r/20191029062745.7932-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/hfi1: Define variables as unsigned long to fix KASAN warning

Define the working variables to be unsigned long to be compatible with
for_each_set_bit and change types as needed.

While we are at i

IB/hfi1: Define variables as unsigned long to fix KASAN warning

Define the working variables to be unsigned long to be compatible with
for_each_set_bit and change types as needed.

While we are at it remove unused variables from a couple of functions.

This was found because of the following KASAN warning:
==================================================================
BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889

CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W 5.3.0-rc2-mm1+ #2
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
Call Trace:
dump_stack+0x9a/0xf0
? find_first_bit+0x19/0x70
print_address_description+0x6c/0x332
? find_first_bit+0x19/0x70
? find_first_bit+0x19/0x70
__kasan_report.cold.6+0x1a/0x3b
? find_first_bit+0x19/0x70
kasan_report+0xe/0x12
find_first_bit+0x19/0x70
pma_get_opa_portstatus+0x5cc/0xa80 [hfi1]
? ret_from_fork+0x3a/0x50
? pma_get_opa_port_ectrs+0x200/0x200 [hfi1]
? stack_trace_consume_entry+0x80/0x80
hfi1_process_mad+0x39b/0x26c0 [hfi1]
? __lock_acquire+0x65e/0x21b0
? clear_linkup_counters+0xb0/0xb0 [hfi1]
? check_chain_key+0x1d7/0x2e0
? lock_downgrade+0x3a0/0x3a0
? match_held_lock+0x2e/0x250
ib_mad_recv_done+0x698/0x15e0 [ib_core]
? clear_linkup_counters+0xb0/0xb0 [hfi1]
? ib_mad_send_done+0xc80/0xc80 [ib_core]
? mark_held_locks+0x79/0xa0
? _raw_spin_unlock_irqrestore+0x44/0x60
? rvt_poll_cq+0x1e1/0x340 [rdmavt]
__ib_process_cq+0x97/0x100 [ib_core]
ib_cq_poll_work+0x31/0xb0 [ib_core]
process_one_work+0x4ee/0xa00
? pwq_dec_nr_in_flight+0x110/0x110
? do_raw_spin_lock+0x113/0x1d0
worker_thread+0x57/0x5a0
? process_one_work+0xa00/0xa00
kthread+0x1bb/0x1e0
? kthread_create_on_node+0xc0/0xc0
ret_from_fork+0x3a/0x50

The buggy address belongs to the page:
page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x17ffffc0000000()
raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame:
pma_get_opa_portstatus+0x0/0xa80 [hfi1]

this frame has 1 object:
[32, 36) 'vl_select_mask'

Memory state around the buggy address:
ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00
^
ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2

==================================================================

Cc: <stable@vger.kernel.org>
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/hfi1: Use struct_size() helper

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code

IB/hfi1: Use struct_size() helper

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

sizeof(struct opa_port_status_rsp) + num_vls * sizeof(struct _vls_pctrs)

with:

struct_size(rsp, vls, num_vls)

and so on...

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA: Mark if create address handle is in a sleepable context

Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic cont

RDMA: Mark if create address handle is in a sleepable context

Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic context or not.

This will allow drivers to wait for completion instead of polling for it
when it is allowed.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/hfi1: Error path MAD response size is incorrect

If a MAD packet has incorrect header information, the logic uses the reply
path to report the error. The reply path expects *resp_len to be set
pr

IB/hfi1: Error path MAD response size is incorrect

If a MAD packet has incorrect header information, the logic uses the reply
path to report the error. The reply path expects *resp_len to be set
prior to return. Unfortunately, *resp_len is set to 0 for this path.
This causes an incorrect response packet.

Fix by ensuring that the *resp_len is defaulted to the incoming packet
size (wc->bytes_len - sizeof(GRH)).

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/hfi1: Set port number for errorinfo MAD response

For errorinfo MAD requests, the response has a 0 port number left over
from a memset. Instead we should always set the port number in the
response

IB/hfi1: Set port number for errorinfo MAD response

For errorinfo MAD requests, the response has a 0 port number left over
from a memset. Instead we should always set the port number in the
response.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Complete check for locally terminated smp

For lid routed packets 'hop_cnt' is zero, therefore current
test is incomplete. Fix it by using local mad check for
both lid routed and direct rout

IB/hfi1: Complete check for locally terminated smp

For lid routed packets 'hop_cnt' is zero, therefore current
test is incomplete. Fix it by using local mad check for
both lid routed and direct routed MADs.

Reviewed-by: Mike Mariciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit times

HFI's counters SendWaitCnt and SendWaitVlCnt are in units
of TXE cycle time (at 805MHz). OPA counters PortXmitWait and
PortVLXmtWa

IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit times

HFI's counters SendWaitCnt and SendWaitVlCnt are in units
of TXE cycle time (at 805MHz). OPA counters PortXmitWait and
PortVLXmtWait are in units of flit times.
Convert the counter values to flit units using following
conversion formula:

PortXmitWait =
SendWaitCnt * 2 * (4 /link_width) * (25 Gbps /link_speed)
PortVLXmitWait =
SendWaitVLCnt * 2 * (4 /link_width) * (25 Gbps /link_speed)

At link up or downgrade events, the link width can change. To ensure
accurate counter calculations, sample the counters after the events,
during counter requests, and then aggregate the OPA counters.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/hfi1: Change slid arg in ingress_pkey_table_fail to 32bit

Change the slid arg to ingress_pkey_table_fail() to a full
32Bits and do not convert to 16Bits in caller. This is so we
can keep everythi

IB/hfi1: Change slid arg in ingress_pkey_table_fail to 32bit

Change the slid arg to ingress_pkey_table_fail() to a full
32Bits and do not convert to 16Bits in caller. This is so we
can keep everything 32bit in the kernel and only change to
16bit at the uapi boundary.

Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/hfi1: Handle initial value of 0 for CCTI setting

When the driver is loaded it sets the default CCTI value to be 0. When the FM
starts and CCA is disabled the driver sets the max value to 65535 du

IB/hfi1: Handle initial value of 0 for CCTI setting

When the driver is loaded it sets the default CCTI value to be 0. When the FM
starts and CCA is disabled the driver sets the max value to 65535 due the driver
subtracting 1 from 0 and the fact that the CCTI value is a u16.

Special case the subtraction to find the index for a 0 value.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Prohibit invalid Init to Armed state transition

It is invalid to change Link state from Init to Armed if
IsSmConfigurationStarted bit is not set in Attribute modifier
for Set subnet managem

IB/hfi1: Prohibit invalid Init to Armed state transition

It is invalid to change Link state from Init to Armed if
IsSmConfigurationStarted bit is not set in Attribute modifier
for Set subnet management method in case of PortInfo
and PortStateInfo attribute.
Set response MAD status field bits accordingly to react correctly
in such situations and avoid changing Link state.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Grzegorz Morys <grzegorz.morys@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Fix a wrapping test to insure the correct timeout

The "2 * UINT_MAX" statement:
if ((u64)(ts - cce->timestamp) > 2 * UINT_MAX) {

is equivalent to:
if ((u64)(ts - cce->timestamp) > UINT_

IB/hfi1: Fix a wrapping test to insure the correct timeout

The "2 * UINT_MAX" statement:
if ((u64)(ts - cce->timestamp) > 2 * UINT_MAX) {

is equivalent to:
if ((u64)(ts - cce->timestamp) > UINT_MAX - 1) {

This results in a premature timeout of the cong log entry.

Fix by using unsigned 64 bit integers, removing casts, and using
an algebraic equivalent test to avoid the "2 * UINT_MAX" issue.

Also make use of kernel API to get nanoseconds instead of
open coding.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Validate PKEY for incoming GSI MAD packets

These are the use-cases where the pkey needs to be tested to see
if a packet needs to be dropped.

a) Check if pkey is not FULL_MGMT_P_KEY or LIM_

IB/hfi1: Validate PKEY for incoming GSI MAD packets

These are the use-cases where the pkey needs to be tested to see
if a packet needs to be dropped.

a) Check if pkey is not FULL_MGMT_P_KEY or LIM_MGMT_P_KEY,
drop the packet as it's not part of the management partition.
Self-originated packets are an exception.

b) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is
in the table, the packet is coming from a management node,
and the receiving node is also a management node, so it is safe
for the packet to go through.

c) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is
NOT in the table, drop the packet as LIM_MGMT_P_KEY should
always be in the pkey table. It could be a misconfiguration.

d) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is
NOT in the table, it is safe for the packet to go through
since a non-management node is talking to another non-managment
node.

e) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is in
the table, drop the packet because a non-management node is
talking to a management node, and it could be an attack.

For the implementation, these rules can be simplied to only checking
for (a) and (e). There's no need to check for rule (b) as
the packet doesn't need to be dropped. Rule (c) is not possible in
the driver as LIM_MGMT_P_KEY is always in the pkey table.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
t

IB/hfi1: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Switches test of .data field to
.function, since .data will be going away.

Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Remove set-but-not-used variables

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>

IB/hfi1: Remove set-but-not-used variables

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Suppress gcc 7 fall-through complaints

Avoid that gcc 7 reports the following warning when building with W=1:

warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off

IB/hfi1: Suppress gcc 7 fall-through complaints

Avoid that gcc 7 reports the following warning when building with W=1:

warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Do not warn on lid conversions for OPA

On OPA devices opa_local_smp_check will receive 32Bit LIDs when the LID
is Extended. In such cases, it is okay to lose the upper 16 bits of the
LID as

IB/hfi1: Do not warn on lid conversions for OPA

On OPA devices opa_local_smp_check will receive 32Bit LIDs when the LID
is Extended. In such cases, it is okay to lose the upper 16 bits of the
LID as this information is obtained elsewhere. Do not issue a warning
when calling ib_lid_cpu16() in this case by masking out the upper 16Bits.

[75920.148985] ------------[ cut here ]------------
[75920.154651] WARNING: CPU: 0 PID: 1718 at ./include/rdma/ib_verbs.h:3788 hfi1_process_mad+0x1c1f/0x1c80 [hfi1]
[75920.166192] Modules linked in: ib_ipoib hfi1(E) rdmavt(E) rdma_ucm(E) ib_ucm(E) rdma_cm(E) ib_cm(E) iw_cm(E) ib_umad(E) ib_uverbs(E) ib_core(E) libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod dax x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel mei_me ipmi_si iTCO_wdt iTCO_vendor_support crypto_simd ipmi_devintf pcspkr mei sg i2c_i801 glue_helper lpc_ich shpchp ioatdma mfd_core wmi ipmi_msghandler cryptd acpi_power_meter acpi_pad nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ptp ahci libahci pps_core crc32c_intel libata dca i2c_algo_bit i2c_core [last unloaded: ib_core]
[75920.246331] CPU: 0 PID: 1718 Comm: kworker/0:1H Tainted: G W I E 4.13.0-rc7+ #1
[75920.255907] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015
[75920.268158] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[75920.274934] task: ffff88084a718000 task.stack: ffffc9000a424000
[75920.282123] RIP: 0010:hfi1_process_mad+0x1c1f/0x1c80 [hfi1]
[75920.288881] RSP: 0018:ffffc9000a427c38 EFLAGS: 00010206
[75920.295265] RAX: 0000000000010001 RBX: ffff8808361420e8 RCX: ffff880837811d80
[75920.303784] RDX: 0000000000000002 RSI: 0000000000007fff RDI: ffff880837811d80
[75920.312302] RBP: ffffc9000a427d38 R08: 0000000000000000 R09: ffff8808361420e8
[75920.320819] R10: ffff88083841f0e8 R11: ffffc9000a427da8 R12: 0000000000000001
[75920.329335] R13: ffff880837810000 R14: 0000000000000000 R15: ffff88084f1a4800
[75920.337849] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000
[75920.347450] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75920.354405] CR2: 00007f9e4b3d9000 CR3: 0000000001c09000 CR4: 00000000001406f0
[75920.362947] Call Trace:
[75920.366257] ? ib_mad_recv_done+0x258/0x9b0 [ib_core]
[75920.372457] ? ib_mad_recv_done+0x258/0x9b0 [ib_core]
[75920.378652] ? __kmalloc+0x1df/0x210
[75920.383229] ib_mad_recv_done+0x305/0x9b0 [ib_core]
[75920.389270] __ib_process_cq+0x5d/0xb0 [ib_core]
[75920.395032] ib_cq_poll_work+0x20/0x60 [ib_core]
[75920.400777] process_one_work+0x149/0x360
[75920.405836] worker_thread+0x4d/0x3c0
[75920.410505] kthread+0x109/0x140
[75920.414681] ? rescuer_thread+0x380/0x380
[75920.419731] ? kthread_park+0x60/0x60
[75920.424406] ret_from_fork+0x25/0x30
[75920.428972] Code: 4c 89 9d 58 ff ff ff 49 89 45 00 66 b8 00 02 49 89 45 08 e8 44 27 89 e0 4c 8b 9d 58 ff ff ff e9 d8 f6 ff ff 0f ff e9 55 e7 ff ff <0f> ff e9 3b e5 ff ff 0f ff 0f 1f 84 00 00 00 00 00 e9 4b e9 ff
[75921.451269] ---[ end trace cf26df27c9597265 ]---

Fixes: 62ede7779904 ("Add OPA extended LID support")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/hfi1: Fix whitespace alignment issue for MAD

Fix a tab alignment issue present in pr_err_ratelimited
error message.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee

IB/hfi1: Fix whitespace alignment issue for MAD

Fix a tab alignment issue present in pr_err_ratelimited
error message.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...