iio: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i

iio: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: proximity: srf08: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.k

iio: proximity: srf08: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-184-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: srf08: Remove redundant if statement

(!val) has been checked outside the loop, remove redundant (val &&)
from loop.

Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Acked-by: Andreas Klinger

iio: srf08: Remove redundant if statement

(!val) has been checked outside the loop, remove redundant (val &&)
from loop.

Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Acked-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/20220523122755.90638-1-lizhengyu3@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio:proximity:srf08: White space cleanup of spacing around {} in id tables

The spacing in this driver was inconsistent with a space after the {
but not before the }. Tidy this up to avoid providing

iio:proximity:srf08: White space cleanup of spacing around {} in id tables

The spacing in this driver was inconsistent with a space after the {
but not before the }. Tidy this up to avoid providing a bad example
to copy into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20211230174911.78291-10-jic23@kernel.org

show more ...

iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 78f839029e1d ("iio: distance: srf08: add IIO driver for us ranger")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-13-jic23@kernel.org

show more ...

iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 19f1a254fe4949fff1e67db386409f48cf438bd7 ]

To make code more readable, use a structure to express th

iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 19f1a254fe4949fff1e67db386409f48cf438bd7 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 78f839029e1d ("iio: distance: srf08: add IIO driver for us ranger")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-13-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Replace HTTP links with HTTPS ones: drivers/iio

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
F

Replace HTTP links with HTTPS ones: drivers/iio

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: remove left-over parent assignments

These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =

iio: remove left-over parent assignments

These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------

The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.

JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330

Based on 1 normalized pattern(s):

this file is subject to the terms and conditions of version 2 of the
gnu general public lice

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330

Based on 1 normalized pattern(s):

this file is subject to the terms and conditions of version 2 of the
gnu general public license see the file copying in the main
directory of this archive for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 55 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner

The equivalent of both of these are now done via macro magic when
the relevant register calls are made. The actual struct

iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner

The equivalent of both of these are now done via macro magic when
the relevant register calls are made. The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

show more ...

iio: srf08: add support for srf02 in i2c mode

srf02 added with support for i2c interface

Attributes for setting max range or sensitivity are omitted for the case of
srf02 type sensor, because they

iio: srf08: add support for srf02 in i2c mode

srf02 added with support for i2c interface

Attributes for setting max range or sensitivity are omitted for the case of
srf02 type sensor, because they are not supported by the hardware.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: srf08: add sensor type srf10

Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by
the driver as device tree compatible string.

It was necessary to prepare the source for

iio: srf08: add sensor type srf10

Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by
the driver as device tree compatible string.

It was necessary to prepare the source for supplementary sensors. This is
done by enum srf08_sensor_type.

The most significiant difference between srf08 and srf10 is another range
and values of register gain (in the driver it's call sensitivity).
Therefore the array of it is extended and dependent of the sensor type.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: srf08: add triggered buffer support

Add support for triggered buffers.

Data format is quite simple:
distance 16 Bit
alignment 48 Bit
timestamp 64 Bit

Signed-off-by: Andreas Kl

iio: srf08: add triggered buffer support

Add support for triggered buffers.

Data format is quite simple:
distance 16 Bit
alignment 48 Bit
timestamp 64 Bit

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: srf08: add device tree table

Added MODULE_DEVICE_TABLE for device tree bindings.

It used to work without it by using the i2c_device_id table, but adding the
table makes everything clear and do

iio: srf08: add device tree table

Added MODULE_DEVICE_TABLE for device tree bindings.

It used to work without it by using the i2c_device_id table, but adding the
table makes everything clear and documented.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: distance: srf08: add IIO driver for us ranger

This is the IIO driver for devantech srf08 ultrasonic ranger which can be
used to measure the distances to an object.

The sensor supports I2C with

iio: distance: srf08: add IIO driver for us ranger

This is the IIO driver for devantech srf08 ultrasonic ranger which can be
used to measure the distances to an object.

The sensor supports I2C with some registers.

Supported Features include:
- read the distance in ranging mode in centimeters
- output of the driver is directly the read value
- together with the scale the driver delivers the distance in meters
- only the first echo of the nearest object is delivered
- set sensitivity as analog value in the range of 0-31 means setting
gain register on device
- set range registers; userspace enters max. range in millimeters in
43 mm steps

Features not supported by this driver:
- ranging mode in inches or in microseconds
- ANN mode
- change I2C address through this driver
- light sensor

The driver was added in the directory "proximity" of the iio subsystem and
the menu in den config is now called "Proximity and distance sensors"

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 19f1a254fe4949fff1e67db386409f48cf438bd7 ]

To make code more readable, use a structu

iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()

[ Upstream commit 19f1a254fe4949fff1e67db386409f48cf438bd7 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of uses of
iio_push_to_buffers_with_timestamp()

Fixes: 78f839029e1d ("iio: distance: srf08: add IIO driver for us ranger")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210501170121.512209-13-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Replace HTTP links with HTTPS ones: drivers/iio

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

De

Replace HTTP links with HTTPS ones: drivers/iio

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: remove left-over parent assignments

These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do

iio: remove left-over parent assignments

These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------

The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.

JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330

Based on 1 normalized pattern(s):

this file is subject to the terms and conditions of version 2 of the
gnu

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330

Based on 1 normalized pattern(s):

this file is subject to the terms and conditions of version 2 of the
gnu general public license see the file copying in the main
directory of this archive for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 55 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner

The equivalent of both of these are now done via macro magic when
the relevant register calls are made. The a

iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner

The equivalent of both of these are now done via macro magic when
the relevant register calls are made. The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

show more ...

iio: srf08: add support for srf02 in i2c mode

srf02 added with support for i2c interface

Attributes for setting max range or sensitivity are omitted for the case of
srf02 type s

iio: srf08: add support for srf02 in i2c mode

srf02 added with support for i2c interface

Attributes for setting max range or sensitivity are omitted for the case of
srf02 type sensor, because they are not supported by the hardware.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: srf08: add sensor type srf10

Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by
the driver as device tree compatible string.

It was necessary to pr

iio: srf08: add sensor type srf10

Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by
the driver as device tree compatible string.

It was necessary to prepare the source for supplementary sensors. This is
done by enum srf08_sensor_type.

The most significiant difference between srf08 and srf10 is another range
and values of register gain (in the driver it's call sensitivity).
Therefore the array of it is extended and dependent of the sensor type.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: srf08: add triggered buffer support

Add support for triggered buffers.

Data format is quite simple:
distance 16 Bit
alignment 48 Bit
timestamp 64 Bi

iio: srf08: add triggered buffer support

Add support for triggered buffers.

Data format is quite simple:
distance 16 Bit
alignment 48 Bit
timestamp 64 Bit

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: srf08: add device tree table

Added MODULE_DEVICE_TABLE for device tree bindings.

It used to work without it by using the i2c_device_id table, but adding the
table makes eve

iio: srf08: add device tree table

Added MODULE_DEVICE_TABLE for device tree bindings.

It used to work without it by using the i2c_device_id table, but adding the
table makes everything clear and documented.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: distance: srf08: add IIO driver for us ranger

This is the IIO driver for devantech srf08 ultrasonic ranger which can be
used to measure the distances to an object.

The sens

iio: distance: srf08: add IIO driver for us ranger

This is the IIO driver for devantech srf08 ultrasonic ranger which can be
used to measure the distances to an object.

The sensor supports I2C with some registers.

Supported Features include:
- read the distance in ranging mode in centimeters
- output of the driver is directly the read value
- together with the scale the driver delivers the distance in meters
- only the first echo of the nearest object is delivered
- set sensitivity as analog value in the range of 0-31 means setting
gain register on device
- set range registers; userspace enters max. range in millimeters in
43 mm steps

Features not supported by this driver:
- ranging mode in inches or in microseconds
- ANN mode
- change I2C address through this driver
- light sensor

The driver was added in the directory "proximity" of the iio subsystem and
the menu in den config is now called "Proximity and distance sensors"

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...