|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29 |
|
| #
7cf15f42 |
| 15-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
iio: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i
iio: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9 |
|
| #
bd66b6ac |
| 30-Jan-2023 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> |
iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
ID seen in the wild and it is a valid ST micro ID.
An offset of 1 for the device ID enum is needed when adding support for
retrieving the I
iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
ID seen in the wild and it is a valid ST micro ID.
An offset of 1 for the device ID enum is needed when adding support for
retrieving the ID from device_get_match_data() to allow detection of
NULL pointer and fallback to i2c_device_id table.
DSDT chunk cropped for relevant parts.
Scope (_SB.PCI0.I2C5)
{
Device (DEV)
{
Name (_HID, EisaId ("SMO8B30")) // _HID: Hardware ID
Name (_CID, EisaId ("SMO8B30")) // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x006A, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.PCI0.I2C5",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_._CRS.RBUF */
}
Method (ROTM, 0, NotSerialized)
{
Name (RBUF, Package (0x03)
{
"0 -1 0",
"1 0 0",
"0 0 1"
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */
}
...
Link: https://lore.kernel.org/all/20230129182441.082f29d0@jic23-huawei/
Reported-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Tested-by: Darrell Kavanagh <darrell.kavanagh@gmail.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230130201018.981024-2-jic23@kernel.org
show more ...
|
| #
18462d08 |
| 06-Mar-2023 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to ASM330LHB
Add support to STM ASM330LHB (acc + gyro) automotive Mems sensor.
The ASM330LHB sensor can use ASM330LHH as fallback device since it
implements all the
iio: imu: st_lsm6dsx: add support to ASM330LHB
Add support to STM ASM330LHB (acc + gyro) automotive Mems sensor.
The ASM330LHB sensor can use ASM330LHH as fallback device since it
implements all the ASM330LHB features currently implemented in
st_lsm6dsx.
Datasheet: https://www.st.com/resource/en/datasheet/asm330lhb.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a1d675457da7aa9e979d8cabea410e942e015e71.1678100533.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80 |
|
| #
3a042fda |
| 24-Nov-2022 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to ISM330IS
Add support to STM ISM330IS (accelerometer and gyroscope) Mems sensor.
The ISM330IS sensor can use LSM6DSO16IS as fallback device since it
implements al
iio: imu: st_lsm6dsx: add support to ISM330IS
Add support to STM ISM330IS (accelerometer and gyroscope) Mems sensor.
The ISM330IS sensor can use LSM6DSO16IS as fallback device since it
implements all the ISM330IS features currently implemented in
st_lsm6dsx.
Datasheet: https://www.st.com/resource/en/datasheet/ism330is.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4cd1614060e06f49cd92f5930d8fd40117c07920.1669279604.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
f35e1ee9 |
| 16-Nov-2022 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
Add support to STM LSM6DSO16IS (accelerometer and gyroscope) Mems sensor.
Datasheet: https://www.st.com/resource/en/datasheet/lsm6dso16is.pdf
Tested
iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
Add support to STM LSM6DSO16IS (accelerometer and gyroscope) Mems sensor.
Datasheet: https://www.st.com/resource/en/datasheet/lsm6dso16is.pdf
Tested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/df6a9d4653cd69f7204190f8b6a9b618fd48bd23.1668605631.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
b7dbc0ae |
| 18-Nov-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
iio: imu: st_lsm6dsx: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kl
iio: imu: st_lsm6dsx: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-112-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v6.0.9, v5.15.79, v6.0.8, v5.15.78 |
|
| #
46975081 |
| 06-Nov-2022 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
Add support to STM LSM6DSV16X (accelerometer and gyroscope) Mems sensor.
The LSM6DSV16X sensor can use LSM6DSV as fallback device since it
implements
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
Add support to STM LSM6DSV16X (accelerometer and gyroscope) Mems sensor.
The LSM6DSV16X sensor can use LSM6DSV as fallback device since it
implements all the LSM6DSV16X features currently implemented in
st_lsm6dsx.
Datasheet: https://www.st.com/resource/en/datasheet/lsm6dsv16x.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/284b251f861dff30c399e5736a843c8e3a497249.1667745215.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v6.0.7, v5.15.77 |
|
| #
a1c6d631 |
| 31-Oct-2022 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSV
Add support to STM LSM6DSV (accelerometer and gyroscope)
Mems sensor.
Datasheet: https://www.st.com/resource/en/datasheet/lsm6dsv.pdf
Signed-off-by: Lor
iio: imu: st_lsm6dsx: add support to LSM6DSV
Add support to STM LSM6DSV (accelerometer and gyroscope)
Mems sensor.
Datasheet: https://www.st.com/resource/en/datasheet/lsm6dsv.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/aad879e7af0fe583bbf043a2b93e32fade79fa19.1667216004.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69 |
|
| #
186b9e38 |
| 15-Sep-2022 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSTX
Add support to STM LSM6DSTX (acc + gyro) Mems sensor.
The LSM6DSTX sensor can use LSM6DST as fallback device since it
implements all the LSM6DSTX featur
iio: imu: st_lsm6dsx: add support to LSM6DSTX
Add support to STM LSM6DSTX (acc + gyro) Mems sensor.
The LSM6DSTX sensor can use LSM6DST as fallback device since it
implements all the LSM6DSTX features currently implemented in
st_lsm6dsx.
Datasheet: https://www.st.com/resource/en/datasheet/lsm6dstx.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/573a232b0f320b2ec92c56fa24393cfb275183fb.1663262890.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45 |
|
| #
2b059449 |
| 04-Jun-2022 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> |
iio: imu: lsm6dsx: Move exported symbols to the IIO_LSM6DSX namespace
Avoid unnecessary pollution of the global symbol namespace by
moving library functions in to a specific namespace and import
tha
iio: imu: lsm6dsx: Move exported symbols to the IIO_LSM6DSX namespace
Avoid unnecessary pollution of the global symbol namespace by
moving library functions in to a specific namespace and import
that into the drivers that make use of the functions.
For more info: https://lwn.net/Articles/760045/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220220181522.541718-9-jic23@kernel.org
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20220604161223.461847-6-jic23@kernel.org
show more ...
|
| #
acc416ff |
| 04-Jun-2022 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> |
iio: imu: lsm6dsx: Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS()
These new functions move the burden of removing unused code when
CONFIG_PM_SLEEP is not defined onto the compiler rather than
iio: imu: lsm6dsx: Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS()
These new functions move the burden of removing unused code when
CONFIG_PM_SLEEP is not defined onto the compiler rather than requiring
the use of CONFIG_PM guards and similar.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220220181522.541718-8-jic23@kernel.org
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20220604161223.461847-5-jic23@kernel.org
show more ...
|
|
Revision tags: v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33 |
|
| #
fdd70d7a |
| 04-Apr-2022 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to ASM330LHHX
Add support to STM ASM330LHHX (acc + gyro) automotive Mems sensor.
The ASM330LHHX sensor can use LSM6DSR as fallback device since it
implements all th
iio: imu: st_lsm6dsx: add support to ASM330LHHX
Add support to STM ASM330LHHX (acc + gyro) automotive Mems sensor.
The ASM330LHHX sensor can use LSM6DSR as fallback device since it
implements all the ASM330LHHX features currently implemented in
st_lsm6dsx.
Datasheet: https://www.st.com/resource/en/datasheet/asm330lhhx.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/04e2644772a6761a25c36bb9679979567fdebda3.1649100168.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24 |
|
| #
9e301ea7 |
| 12-Mar-2021 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
iio: imu: st_lsm6dsx: Drop unneeded explicit castings
In a few places the unnecessary explicit castings are being used.
Drop them for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.i
iio: imu: st_lsm6dsx: Drop unneeded explicit castings
In a few places the unnecessary explicit castings are being used.
Drop them for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210312134743.4055-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
| #
2c57d265 |
| 29-Nov-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSOP
Add support to STM LSM6DSOP (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsop.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@ker
iio: imu: st_lsm6dsx: add support to LSM6DSOP
Add support to STM LSM6DSOP (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsop.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/d3c459ad945ccd1a256f4a217128be214b0c024e.1606642528.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14 |
|
| #
4393e4c5 |
| 06-Oct-2020 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DST
Add support to STM LSM6DST (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dst.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel
iio: imu: st_lsm6dsx: add support to LSM6DST
Add support to STM LSM6DST (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dst.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/835127b76ef5ad05aa2aac58298aee5f3073fb71.1601985763.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
| #
e3da4307 |
| 16-Dec-2019 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
iio: st_lsm6dsx: Drop unneeded OF code
There is no need to have OF guard against ID table.
Drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonath
iio: st_lsm6dsx: Drop unneeded OF code
There is no need to have OF guard against ID table.
Drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8 |
|
| #
cf9c71b3 |
| 24-Oct-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSRX
Add support to STM LSM6DSRX 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsrx.pdf
Signed-off-by: Lorenzo Bianconi <lore
iio: imu: st_lsm6dsx: add support to LSM6DSRX
Add support to STM LSM6DSRX 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsrx.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.3.7, v5.3.6, v5.3.5 |
|
| #
fa060a3d |
| 07-Oct-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DS0
Add support to STM LSM6DS0 6-axis (acc + gyro) Mems sensor
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonatha
iio: imu: st_lsm6dsx: add support to LSM6DS0
Add support to STM LSM6DS0 6-axis (acc + gyro) Mems sensor
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10 |
|
| #
52f4b1f1 |
| 21-Aug-2019 |
Martin Kepplinger <martin.kepplinger@puri.sm> |
iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately
supported in iio/magnetometer/st_magn*) are located on
iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately
supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses
on the bus.
For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf
Treat it just like the LSM6* devices and, despite it's name, hook it up
to the st_lsm6dsx driver, using it's basic functionality.
accelerometer and gyroscope are not independently clocked. It runs at the gyro
frequencies if both are enabled, see chapter 7.12 of the datasheet.
We could have handled this as a single IIO device but we have split
it up to be more consistent with the other more flexible devices.
Despite supporting and testing the LSM9DS1, we call the gyro channels
iio_chan_spec struct "st_lsm6ds0_gyro_channels" because the register
description is equal. This suggests that supporting LSM6DS0 should be
trivial to do.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.2.9, v5.2.8, v5.2.7 |
|
| #
db947a79 |
| 05-Aug-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to ISM330DHCX
Add support to STM ISM330DHCX 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/ism330dhcx.pdf
Signed-off-by: Lorenzo Bianconi
iio: imu: st_lsm6dsx: add support to ISM330DHCX
Add support to STM ISM330DHCX 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/ism330dhcx.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16 |
|
| #
dbcd2088 |
| 29-Jun-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C
Add support to STM LSM6DS3TR-C 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf
Signed-off-by: Lorenzo Bianc
iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C
Add support to STM LSM6DS3TR-C 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8 |
|
| #
81956a93 |
| 08-Jun-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings
Introduce sensor name in st_lsm6dsx_sensor_settings table. This is
a preliminary patch to add I3C support to st_lsm6dsx since i3
iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings
Introduce sensor name in st_lsm6dsx_sensor_settings table. This is
a preliminary patch to add I3C support to st_lsm6dsx since i3c_device_id
data structure does not contain a name field
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.1.7, v5.1.6 |
|
| #
fda8d26e |
| 28-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177
Based on 1 normalized pattern(s):
licensed under the gpl 2
extracted by the scancode license scanner the SPDX license identifie
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177
Based on 1 normalized pattern(s):
licensed under the gpl 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 135 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7 |
|
| #
43901008 |
| 04-Apr-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSR
Add support to STM LSM6DSR 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsr.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo
iio: imu: st_lsm6dsx: add support to LSM6DSR
Add support to STM LSM6DSR 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsr.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.0.6, v5.0.5, v5.0.4, v5.0.3 |
|
| #
6af0e8a9 |
| 15-Mar-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
iio: imu: st_lsm6dsx: add support to LSM6DSOX
Add support to STM LSM6DSOX 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsox.pdf
Signed-off-by: Lorenzo Bianconi <lore
iio: imu: st_lsm6dsx: add support to LSM6DSOX
Add support to STM LSM6DSOX 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsox.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|