|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11 |
|
| #
49d22b69 |
| 08-Oct-2021 |
Roan van Dijk <roan@protonic.nl> |
drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
This is a driver for the SCD4x CO2 sensor from Sensirion. The sensor is
able to measure CO2 concentration, temperature and relative
drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
This is a driver for the SCD4x CO2 sensor from Sensirion. The sensor is
able to measure CO2 concentration, temperature and relative humdity.
The sensor uses a photoacoustic principle for measuring CO2 concentration.
An I2C interface is supported by this driver in order to communicate with
the sensor.
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Link: https://lore.kernel.org/r/20211008101706.755942-4-roan@protonic.nl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.14.10, v5.14.9, v5.14.8, v5.14.7 |
|
| #
c397894e |
| 20-Sep-2021 |
Jacopo Mondi <jacopo@jmondi.org> |
iio: chemical: Add Senseair Sunrise 006-0-007 driver
Add support for the Senseair Sunrise 006-0-0007 driver through the
IIO subsystem.
Datasheet: https://rmtplusstoragesenseair.blob.core.windows.ne
iio: chemical: Add Senseair Sunrise 006-0-007 driver
Add support for the Senseair Sunrise 006-0-0007 driver through the
IIO subsystem.
Datasheet: https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/TDE5531.pdf
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Link: https://lore.kernel.org/r/20210920135413.140310-4-jacopo+renesas@jmondi.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60 |
|
| #
1081b9d9 |
| 04-Aug-2021 |
Andreas Klinger <ak@it-klinger.de> |
iio: chemical: Add driver support for sgp40
sgp40 is a gas sensor used for measuring the air quality.
This driver is reading the raw resistance value which can be passed to
an userspace algorithm f
iio: chemical: Add driver support for sgp40
sgp40 is a gas sensor used for measuring the air quality.
This driver is reading the raw resistance value which can be passed to
an userspace algorithm for further calculation.
The raw value is also used to calculate an estimated absolute voc index
in the range from 0 to 500. For this purpose the raw_mean value of the
resistance for which the index value is 250 might be set up as a
calibration step. This can be done with in_resistance_calibbias.
Compensation of relative humidity and temperature is supported and can
be used by writing to output values of out_humidityrelative_raw and
out_temp_raw.
There is a predecesor sensor type (sgp30) already existing. This driver
module was not extended because the new sensor is quite different in its
i2c telegrams.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210804154641.GA3237@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35 |
|
| #
b2e171f5 |
| 03-May-2021 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: sps30: add support for serial interface
Sensor has support for both i2c and serial communication interfaces.
Both offer very similar set of features. Minor differences don't impact
overall func
iio: sps30: add support for serial interface
Sensor has support for both i2c and serial communication interfaces.
Both offer very similar set of features. Minor differences don't impact
overall functionality like doing measurements, etc.
Support for i2c have already been added, this patch adds support
for the latter ie. serial interface.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
8f3f1308 |
| 03-May-2021 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: sps30: separate core and interface specific code
Move code responsible for handling i2c communication to a separate file.
Rationale for this change is preparation for adding support for serial
iio: sps30: separate core and interface specific code
Move code responsible for handling i2c communication to a separate file.
Rationale for this change is preparation for adding support for serial
communication.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48 |
|
| #
d4553d6e |
| 21-Jun-2020 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: chemical: scd30: add serial interface driver
Add serial interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Andy Shevchenko <andy
iio: chemical: scd30: add serial interface driver
Add serial interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
e510190e |
| 21-Jun-2020 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: chemical: scd30: add I2C interface driver
Add I2C interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Andy Shevchenko <andy.shevc
iio: chemical: scd30: add I2C interface driver
Add I2C interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
64b3d8b1 |
| 21-Jun-2020 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: chemical: scd30: add core driver
Add Sensirion SCD30 carbon dioxide core driver.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Camero
iio: chemical: scd30: add core driver
Add Sensirion SCD30 carbon dioxide core driver.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41 |
|
| #
8712b309 |
| 10-May-2020 |
Matt Ranostay <matt.ranostay@konsulko.com> |
iio: chemical: add atlas-ezo-sensor initial support
Add driver for Atlas EZO line of sensors with initial support for
CO2 the sensor. This is effectively ASCII strings proxied over I2C
due to these
iio: chemical: add atlas-ezo-sensor initial support
Add driver for Atlas EZO line of sensors with initial support for
CO2 the sensor. This is effectively ASCII strings proxied over I2C
due to these series of sensors being by default UART.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
| #
0d15190f |
| 15-Dec-2019 |
Matt Ranostay <matt.ranostay@konsulko.com> |
iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
Since the orginal scope of the driver was to only support
the pH product from Atlas it has evolved to other sensors.
Rename th
iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
Since the orginal scope of the driver was to only support
the pH product from Atlas it has evolved to other sensors.
Rename the file, driver name, and regmap to atlas-sensor which
reflects this, although keep CONFIG_ATLAS_PH_SENSOR to not cause
regressions with current configurations.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4 |
|
| #
ec8f24b7 |
| 19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21 |
|
| #
a1d64226 |
| 09-Feb-2019 |
Tomasz Duszynski <tduszyns@gmail.com> |
iio: chemical: add support for Plantower PMS7003 sensor
Add support for Plantower PMS7003 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cam
iio: chemical: add support for Plantower PMS7003 sensor
Add support for Plantower PMS7003 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10 |
|
| #
ce514124 |
| 13-Dec-2018 |
Andreas Brauchli <a.brauchli@elementarea.net> |
iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
Supported Features:
* Indoor Air Quality (IAQ) concentrations for
- tVOC
iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
Supported Features:
* Indoor Air Quality (IAQ) concentrations for
- tVOC (in_concentration_voc_input)
- CO2eq (in_concentration_co2_input) - SGP30 only
IAQ concentrations are periodically read out by a background thread
to allow the sensor to maintain its internal baseline.
* Gas concentration signals
- Ethanol (in_concentration_ethanol_raw)
- H2 (in_concentration_h2_raw) - SGP30 only
https://www.sensirion.com/file/datasheet_sgp30
https://www.sensirion.com/file/datasheet_sgpc3
Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
232e0f6d |
| 14-Dec-2018 |
Tomasz Duszynski <tduszyns@gmail.com> |
iio: chemical: add support for Sensirion SPS30 sensor
Add support for Sensirion SPS30 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron
iio: chemical: add support for Sensirion SPS30 sensor
Add support for Sensirion SPS30 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11 |
|
| #
1b3bd859 |
| 26-Jul-2018 |
Himanshu Jha <himanshujha199640@gmail.com> |
iio: chemical: Add support for Bosch BME680 sensor
Bosch BME680 is a 4-in-1 sensor with temperature, pressure, humidity
and gas sensing capability. It supports both I2C and SPI communication
protoco
iio: chemical: Add support for Bosch BME680 sensor
Bosch BME680 is a 4-in-1 sensor with temperature, pressure, humidity
and gas sensing capability. It supports both I2C and SPI communication
protocol for effective data communication.
The device supports two modes:
1. Sleep mode
2. Forced mode
The measurements only takes place when forced mode is triggered and a
single TPHG cycle is performed by the sensor. The sensor automatically
goes to sleep after afterwards.
The device has various calibration constants/parameters programmed into
devices' non-volatile memory(NVM) during production and can't be altered
by the user. These constants are used in the compensation functions to
get the required compensated readings along with the raw data. The
compensation functions/algorithms are provided by Bosch Sensortec GmbH
via their API[1]. As these don't change during the measurement cycle,
therefore we read and store them at the probe. The default configs
supplied by Bosch are also set at probe.
0-day tested with build success.
GSoC-2018: https://summerofcode.withgoogle.com/projects/#6691473790074880
Mentor: Daniel Baluta
[1] https://github.com/BoschSensortec/BME680_driver
Datasheet:
https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001-00.pdf
Note from Jonathan: The compensation functions are 'interesting' and
could do with a tidy up in future. However, they work so we can leave that
for another day.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13 |
|
| #
a94c24a7 |
| 17-Jul-2017 |
Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> |
iio: chemical: ccs811: Add support for AMS CCS811 VOC sensor
Add support for CCS811 VOC sensor. This patch adds support
for reading current and voltage across the sensor and TVOC
and equivalent CO2
iio: chemical: ccs811: Add support for AMS CCS811 VOC sensor
Add support for CCS811 VOC sensor. This patch adds support
for reading current and voltage across the sensor and TVOC
and equivalent CO2 values.
Scale and offset values have been computed according to datasheet:
- For current: raw value is in microamps
=> 0.001 scale to convert to milliamps
- For voltage: 1.65V = 1023, therefore 1650mV = 1023
=> 1650.0/1023 = 1.612903 scale to convert to millivolts
- For eCO2: raw value range is from 400ppm to 8192ppm.
=> (val - 400) * (100 - 0) / (8192 - 400) + 0 =
(val - 400) * 0.01283367 => offset: -400, scale = 0.012834
to get a percentage value
-For TVOC: raw value range is from 0ppb to 1187ppb.
=> (val - 0) * 100 / (1187 - 0) + 0 = val * 0.0842459 =>
scale = 0.084246 for getting a percentage value
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1 |
|
| #
27dec00e |
| 26-Jan-2016 |
Matt Ranostay <mranostay@gmail.com> |
iio: chemical: add Atlas pH-SM sensor support
Add support for the Atlas Scientific pH-SM chemical sensor that can
detect pH levels of solutions in the range of 0-14.
Signed-off-by: Matt Ranostay <m
iio: chemical: add Atlas pH-SM sensor support
Add support for the Atlas Scientific pH-SM chemical sensor that can
detect pH levels of solutions in the range of 0-14.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
show more ...
|
|
Revision tags: openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1 |
|
| #
466df4d0 |
| 06-Dec-2015 |
Matt Ranostay <mranostay@gmail.com> |
iio: chemical: add AMS iAQ-core support
Add support for AMS iAQ-core continuous and pulsed VOC sensors.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@ker
iio: chemical: add AMS iAQ-core support
Add support for AMS iAQ-core continuous and pulsed VOC sensors.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
show more ...
|
|
Revision tags: openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
| #
cd8d9777 |
| 13-Sep-2015 |
Matt Ranostay <mranostay@gmail.com> |
iio: chemical: add SGX VZ89x VOC sensor support
Add support for VZ89X sensors VOC and CO2 reporting channels in
percentage which can be converted to part per million.
Signed-off-by: Matt Ranostay <
iio: chemical: add SGX VZ89x VOC sensor support
Add support for VZ89X sensors VOC and CO2 reporting channels in
percentage which can be converted to part per million.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
show more ...
|
|
Revision tags: v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48 |
|
| #
d4553d6e |
| 21-Jun-2020 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: chemical: scd30: add serial interface driver
Add serial interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: A
iio: chemical: scd30: add serial interface driver
Add serial interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
e510190e |
| 21-Jun-2020 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: chemical: scd30: add I2C interface driver
Add I2C interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Andy Sh
iio: chemical: scd30: add I2C interface driver
Add I2C interface driver for the SCD30 sensor.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
| #
64b3d8b1 |
| 21-Jun-2020 |
Tomasz Duszynski <tomasz.duszynski@octakon.com> |
iio: chemical: scd30: add core driver
Add Sensirion SCD30 carbon dioxide core driver.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Jonathan Came
iio: chemical: scd30: add core driver
Add Sensirion SCD30 carbon dioxide core driver.
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41 |
|
| #
8712b309 |
| 10-May-2020 |
Matt Ranostay <matt.ranostay@konsulko.com> |
iio: chemical: add atlas-ezo-sensor initial support
Add driver for Atlas EZO line of sensors with initial support for
CO2 the sensor. This is effectively ASCII strings proxied over I2C
iio: chemical: add atlas-ezo-sensor initial support
Add driver for Atlas EZO line of sensors with initial support for
CO2 the sensor. This is effectively ASCII strings proxied over I2C
due to these series of sensors being by default UART.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
| #
0d15190f |
| 15-Dec-2019 |
Matt Ranostay <matt.ranostay@konsulko.com> |
iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
Since the orginal scope of the driver was to only support
the pH product from Atlas it has evolved to other sensors
iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
Since the orginal scope of the driver was to only support
the pH product from Atlas it has evolved to other sensors.
Rename the file, driver name, and regmap to atlas-sensor which
reflects this, although keep CONFIG_ATLAS_PH_SENSOR to not cause
regressions with current configurations.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4 |
|
| #
ec8f24b7 |
| 19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These file
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|