i2c: sis5595: Do PCI error checks on own line

Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.

No functional changes

i2c: sis5595: Do PCI error checks on own line

Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.

No functional changes intended.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

Based on 3 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

Based on 3 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Annotate hardware config module parameters in drivers/i2c/

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whil

Annotate hardware config module parameters in drivers/i2c/

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/i2c/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jean Delvare <jdelvare@suse.de>
cc: linux-i2c@vger.kernel.org

show more ...

i2c: remove FSF address

We have a central copy of the GPL for that. Some addresses were already
outdated.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

i2c: remove DEFINE_PCI_DEVICE_TABLE macro

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Wolfram Sang <

i2c: remove DEFINE_PCI_DEVICE_TABLE macro

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

show more ...

i2c: remove __dev* attributes from subsystem

CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __dev

i2c: remove __dev* attributes from subsystem

CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio)
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio)
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3)
Acked-by: Barry Song <baohua.song@csr.com> (for sirf)
Reviewed-by: Jean Delvare <khali@linux-fr.org>
[wsa: Fixed "foo* bar" flaws while we are here]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>

show more ...

i2c: Convert to DEFINE_PCI_DEVICE_TABLE

Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables.

Use DEFINE_PCI_DEVICE_TABLE ensures we make the pci_device_id table const
a

i2c: Convert to DEFINE_PCI_DEVICE_TABLE

Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables.

Use DEFINE_PCI_DEVICE_TABLE ensures we make the pci_device_id table const
and marked as __devinitconst.

This also fixes some warnings from checkpatch:
e.g.
WARNING: Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id
#1096: FILE: i2c/busses/i2c-intel-mid.c:1096:
+static struct pci_device_id intel_mid_i2c_ids[] = {

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Acked-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

i2c: Fix error value returned by several bus drivers

When adding checks for ACPI resource conflicts to many bus drivers,
not enough attention was paid to the error paths, and for several
drivers thi

i2c: Fix error value returned by several bus drivers

When adding checks for ACPI resource conflicts to many bus drivers,
not enough attention was paid to the error paths, and for several
drivers this causes 0 to be returned on error in some cases. Fix this
by properly returning a non-zero value on every error.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org

show more ...

i2c: Use <linux/io.h> instead of <asm/io.h>

As warned by checkpatch.pl, <linux/io.h> should be used instead of
<asm/io.h>.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off

i2c: Use <linux/io.h> instead of <asm/io.h>

As warned by checkpatch.pl, <linux/io.h> should be used instead of
<asm/io.h>.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

i2c: Make PCI device ids constant

The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make initialization data also constant.

The semantic match that finds th

i2c: Make PCI device ids constant

The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

i2c: Add missing __devinit markers to old i2c adapter drivers

These _setup functions are called from _probe so they can be marked
__devinit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c: Timeouts off by 1

with while (timeout++ < MAX_TIMEOUT); timeout reaches MAX_TIMEOUT + 1
after the loop, so the tests below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Sign

i2c: Timeouts off by 1

with while (timeout++ < MAX_TIMEOUT); timeout reaches MAX_TIMEOUT + 1
after the loop, so the tests below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

i2c: Delete many unused adapter IDs

Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c: Use snprintf to set adapter names

Use snprintf instead of sprintf to set adapter names, it's safer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c: Drop stray references to lm_sensors

Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c: Check for ACPI resource conflicts

Check for ACPI resource conflicts in i2c bus drivers. I've included
all recent SMBus master drivers for PC hardware.

I've voluntarily left out:
* Drivers that

i2c: Check for ACPI resource conflicts

Check for ACPI resource conflicts in i2c bus drivers. I've included
all recent SMBus master drivers for PC hardware.

I've voluntarily left out:
* Drivers that don't run on PCs: they can't conflict with ACPI.
* Bit-banged bus device drivers: it's very unlikely that ACPI would
deal with such buses.

Signed-off-by: Jean Delvare <jdelvare@suse.de>

show more ...

i2c: Let bus drivers add SPD to their class

Let general purpose I2C/SMBus bus drivers add SPD to their class. Once
this is done, we will be able to tell the eeprom driver to only probe
for SPD EEPRO

i2c: Let bus drivers add SPD to their class

Let general purpose I2C/SMBus bus drivers add SPD to their class. Once
this is done, we will be able to tell the eeprom driver to only probe
for SPD EEPROMs and similar on these buses.

Note that I took a conservative approach here, adding I2C_CLASS_SPD to
many drivers that have no idea whether they can host SPD EEPROMs or not.
This is to make sure that the eeprom driver doesn't stop probing buses
where SPD EEPROMs or equivalent live.

So, bus driver maintainers and users should feel free to remove the SPD
class from drivers those buses never have SPD EEPROMs or they don't
want the eeprom driver to bind to them. Likewise, feel free to add the
SPD class to any bus driver I might have missed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

i2c: Bus drivers return -Errno not -1

Tighten error paths used by various i2c adapters (mostly x86) so
they return real fault/errno codes instead of a "-1" (which is
most often interpreted as "-EPER

i2c: Bus drivers return -Errno not -1

Tighten error paths used by various i2c adapters (mostly x86) so
they return real fault/errno codes instead of a "-1" (which is
most often interpreted as "-EPERM"). Build tested, with eyeball
review.

One minor initial goal is to have adapters consistently return
the code "-ENXIO" when addressing a device doesn't get an ACK
response, at least in the probe paths where they are already
good at stifling related logspam.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

i2c-sis5595: Minor cleanups in sis5595_access

* Remove commented-out code.
* Use dev_warn instead of printk.
* Remove a legacy comment.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c: Spelling fix (successful)

Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c-sis5595: Resolve resource conflict with sis5595

Let the i2c-sis5595 driver release its PCI device after registering.
This is to allow the sis5595 hardware monitoring driver to also
access this P

i2c-sis5595: Resolve resource conflict with sis5595

Let the i2c-sis5595 driver release its PCI device after registering.
This is to allow the sis5595 hardware monitoring driver to also
access this PCI device. The same trick is already used in the
i2c-viapro and via686a drivers to let them both load.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

Replace remaining references to "driverfs" with "sysfs".

Globally, s/driverfs/sysfs/g.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

i2c: Add IDs to adapters

IDs have been defined but not used by most of the I2C adapters.
By having a unique ID, clients can check for correct connection
during probe.

Signed-off-by: Stephen Hemming

i2c: Add IDs to adapters

IDs have been defined but not used by most of the I2C adapters.
By having a unique ID, clients can check for correct connection
during probe.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

show more ...

i2c: Constify i2c_algorithm declarations, part 2

i2c: Constify i2c_algorithm declarations, part 2

Make struct i2c_algorithm declarations const in all i2c bus drivers
where it is possible.

Signed-o

i2c: Constify i2c_algorithm declarations, part 2

i2c: Constify i2c_algorithm declarations, part 2

Make struct i2c_algorithm declarations const in all i2c bus drivers
where it is possible.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

[PATCH] PCI: removed unneeded .owner field from struct pci_driver

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>