Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28 |
|
#
1975d167 |
| 05-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
hwmon: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 (
hwmon: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de [groeck: Added missing change in pmbus/acbel-fsg032.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62 |
|
#
f2f394db |
| 18-Aug-2022 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
hwmon: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated b
hwmon: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210014.6769-1-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26 |
|
#
1f4d4af4 |
| 21-Mar-2021 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: replace snprintf in show functions with sysfs_emit
coccicheck complains about the use of snprintf() in sysfs show functions.
drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprin
hwmon: replace snprintf in show functions with sysfs_emit
coccicheck complains about the use of snprintf() in sysfs show functions.
drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprintf
This results in a large number of patch submissions. Fix it all in one go using the following coccinelle rules. Use sysfs_emit instead of scnprintf or sprintf since that makes more sense.
@depends on patch@ identifier show, dev, attr, buf; @@
ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> }
@depends on patch@ identifier show, dev, attr, buf, rc; @@
ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... rc = - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> }
While at it, remove unnecessary braces and as well as unnecessary else after return statements to address checkpatch warnings in the resulting patch.
Cc: Zihao Tang <tangzihao1@hisilicon.com> Cc: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
dac8978a |
| 21-Mar-2021 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: replace snprintf in show functions with sysfs_emit
coccicheck complains about the use of snprintf() in sysfs show functions.
drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprin
hwmon: replace snprintf in show functions with sysfs_emit
coccicheck complains about the use of snprintf() in sysfs show functions.
drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprintf
This results in a large number of patch submissions. Fix it all in one go using the following coccinelle rules. Use sysfs_emit instead of scnprintf or sprintf since that makes more sense.
@depends on patch@ identifier show, dev, attr, buf; @@
ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> }
@depends on patch@ identifier show, dev, attr, buf, rc; @@
ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... rc = - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> }
While at it, remove unnecessary braces and as well as unnecessary else after return statements to address checkpatch warnings in the resulting patch.
Cc: Zihao Tang <tangzihao1@hisilicon.com> Cc: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 1f4d4af4d7a1c794a4f003f75fcfd38fafb5dff3) Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
Revision tags: v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59 |
|
#
67487038 |
| 13-Aug-2020 |
Stephen Kitt <steve@sk2.org> |
hwmon: use simple i2c probe function
Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by
hwmon: use simple i2c probe function
Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did are modified as follows:
* if the information in i2c_client is sufficient, that's used instead (client->name); * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before.
A few drivers aren't included in this patch because they have a different set of maintainers. They will be covered by other patches.
Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
c942fddf |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7 |
|
#
1cbee124 |
| 04-Apr-2019 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (stts751) Fix build warning
The following build warning is seen if CONFIG_OF is disabled.
drivers/hwmon/stts751.c:88:34: warning: ‘stts751_of_match’ defined but not used
Mark stts751_of_ma
hwmon: (stts751) Fix build warning
The following build warning is seen if CONFIG_OF is disabled.
drivers/hwmon/stts751.c:88:34: warning: ‘stts751_of_match’ defined but not used
Mark stts751_of_match as __maybe_unused to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9 |
|
#
ecd52d7b |
| 10-Dec-2018 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (stts751) Use permission specific SENSOR[_DEVICE]_ATTR variants
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readability, and to reduce the chance of incons
hwmon: (stts751) Use permission specific SENSOR[_DEVICE]_ATTR variants
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readability, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5 |
|
#
fc483a9b |
| 19-Sep-2017 |
Jean Delvare <jdelvare@suse.de> |
hwmon: (stts751) Fix buffer size passed to snprintf
Function snprintf already cares for the terminating NUL at the end of the string, the caller doesn't need to do it.
Signed-off-by: Jean Delvare <
hwmon: (stts751) Fix buffer size passed to snprintf
Function snprintf already cares for the terminating NUL at the end of the string, the caller doesn't need to do it.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Andrea Merello <andrea.merello@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.13 |
|
#
3be6bd69 |
| 10-Aug-2017 |
Anton Vasilyev <vasilyev@ispras.ru> |
hwmon: (stts751) buffer overrun on wrong chip configuration
If stts751 hw by some reason reports conversion rate bigger then 9: ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE)
hwmon: (stts751) buffer overrun on wrong chip configuration
If stts751 hw by some reason reports conversion rate bigger then 9: ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE); then dereferencing stts751_intervals[priv->interval] leads to buffer overrun.
The patch adds sanity check for value stored on chip.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 7f07ec0fa17a ("hwmon: new driver for ST stts751 thermal sensor") Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1 |
|
#
1c1a7b75 |
| 24-Feb-2017 |
Javier Martinez Canillas <javier@osg.samsung.com> |
hwmon: (stts751) Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device
hwmon: (stts751) Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.10 |
|
#
7f07ec0f |
| 02-Feb-2017 |
andrea.merello <andrea.merello@gmail.com> |
hwmon: new driver for ST stts751 thermal sensor
This patch adds a HWMON driver for ST Microelectronics STTS751 temperature sensors.
Thanks-to: LABBE Corentin [for suggestions] Thanks-to: Guenter Ro
hwmon: new driver for ST stts751 thermal sensor
This patch adds a HWMON driver for ST Microelectronics STTS751 temperature sensors.
Thanks-to: LABBE Corentin [for suggestions] Thanks-to: Guenter Roeck [for suggestion and discussions] Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
dac8978a |
| 21-Mar-2021 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: replace snprintf in show functions with sysfs_emit coccicheck complains about the use of snprintf() in sysfs show functions. drivers/hwmon/ina3221.c:701:8-16: WARNING: us
hwmon: replace snprintf in show functions with sysfs_emit coccicheck complains about the use of snprintf() in sysfs show functions. drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprintf This results in a large number of patch submissions. Fix it all in one go using the following coccinelle rules. Use sysfs_emit instead of scnprintf or sprintf since that makes more sense. @depends on patch@ identifier show, dev, attr, buf; @@ ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> } @depends on patch@ identifier show, dev, attr, buf, rc; @@ ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... rc = - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> } While at it, remove unnecessary braces and as well as unnecessary else after return statements to address checkpatch warnings in the resulting patch. Cc: Zihao Tang <tangzihao1@hisilicon.com> Cc: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 1f4d4af4d7a1c794a4f003f75fcfd38fafb5dff3) Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
Revision tags: v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59 |
|
#
67487038 |
| 13-Aug-2020 |
Stephen Kitt <steve@sk2.org> |
hwmon: use simple i2c probe function Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form (
hwmon: use simple i2c probe function Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified as follows: * if the information in i2c_client is sufficient, that's used instead (client->name); * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before. A few drivers aren't included in this patch because they have a different set of maintainers. They will be covered by other patches. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
c942fddf |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7 |
|
#
1cbee124 |
| 04-Apr-2019 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (stts751) Fix build warning The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/stts751.c:88:34: warning: ‘stts751_of_match’ defined but n
hwmon: (stts751) Fix build warning The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/stts751.c:88:34: warning: ‘stts751_of_match’ defined but not used Mark stts751_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9 |
|
#
ecd52d7b |
| 10-Dec-2018 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (stts751) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readability, and to reduce the chan
hwmon: (stts751) Use permission specific SENSOR[_DEVICE]_ATTR variants Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readability, and to reduce the chance of inconsistencies. Also replace any remaining S_<PERMS> in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/hwmon/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5 |
|
#
fc483a9b |
| 19-Sep-2017 |
Jean Delvare <jdelvare@suse.de> |
hwmon: (stts751) Fix buffer size passed to snprintf Function snprintf already cares for the terminating NUL at the end of the string, the caller doesn't need to do it. Signed-of
hwmon: (stts751) Fix buffer size passed to snprintf Function snprintf already cares for the terminating NUL at the end of the string, the caller doesn't need to do it. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Andrea Merello <andrea.merello@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.13 |
|
#
3be6bd69 |
| 10-Aug-2017 |
Anton Vasilyev <vasilyev@ispras.ru> |
hwmon: (stts751) buffer overrun on wrong chip configuration If stts751 hw by some reason reports conversion rate bigger then 9: ret = i2c_smbus_read_byte_data(priv->client, STTS7
hwmon: (stts751) buffer overrun on wrong chip configuration If stts751 hw by some reason reports conversion rate bigger then 9: ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE); then dereferencing stts751_intervals[priv->interval] leads to buffer overrun. The patch adds sanity check for value stored on chip. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 7f07ec0fa17a ("hwmon: new driver for ST stts751 thermal sensor") Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1 |
|
#
1c1a7b75 |
| 24-Feb-2017 |
Javier Martinez Canillas <javier@osg.samsung.com> |
hwmon: (stts751) Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that
hwmon: (stts751) Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.10 |
|
#
7f07ec0f |
| 02-Feb-2017 |
andrea.merello <andrea.merello@gmail.com> |
hwmon: new driver for ST stts751 thermal sensor This patch adds a HWMON driver for ST Microelectronics STTS751 temperature sensors. Thanks-to: LABBE Corentin [for suggestions]
hwmon: new driver for ST stts751 thermal sensor This patch adds a HWMON driver for ST Microelectronics STTS751 temperature sensors. Thanks-to: LABBE Corentin [for suggestions] Thanks-to: Guenter Roeck [for suggestion and discussions] Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|