Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45 |
|
#
30572c7b |
| 10-Aug-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
'chip_id' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes:
tps53679.c:238:13: error: cast to smaller integer
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
'chip_id' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes:
tps53679.c:238:13: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810093157.94244-13-krzysztof.kozlowski@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39 |
|
#
39f03438 |
| 14-Jul-2023 |
Rob Herring <robh@kernel.org> |
hwmon: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that m
hwmon: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230714174607.4057185-1-robh@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28 |
|
#
1975d167 |
| 05-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
hwmon: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 (
hwmon: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de [groeck: Added missing change in pmbus/acbel-fsg032.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32 |
|
#
b94ca77e |
| 20-Apr-2021 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus) Introduce PMBUS symbol namespace
Exported pmbus symbols are only supposed to be used from PMBus code. Introduce PMBUS symbol namespace to prevent misuse from other code.
Signed-off-b
hwmon: (pmbus) Introduce PMBUS symbol namespace
Exported pmbus symbols are only supposed to be used from PMBus code. Introduce PMBUS symbol namespace to prevent misuse from other code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.10.31, v5.10.30, v5.10.27, v5.10.26 |
|
#
cb3d37b5 |
| 22-Mar-2021 |
Erik Rosen <erik.rosen@metormote.com> |
hwmon: (pmbus/tps53679) Add support for TI TPS53676
Add support for TI TPS53676 controller to the tps53679 pmbus driver
The driver uses the USER_DATA_03 register to figure out how many phases are e
hwmon: (pmbus/tps53679) Add support for TI TPS53676
Add support for TI TPS53676 controller to the tps53679 pmbus driver
The driver uses the USER_DATA_03 register to figure out how many phases are enabled and to which channel they are assigned, and sets the number of pages and phases accordingly.
Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210322193734.75127-3-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17 |
|
#
3bce071a |
| 26-Oct-2020 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
hwmon: (pmbus) shrink code and remove pmbus_do_remove()
The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe time and re
hwmon: (pmbus) shrink code and remove pmbus_do_remove()
The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe time and remove pmbus_do_remove() entirely from all pmbus drivers.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20201026105352.20359-1-brgl@bgdev.pl [groeck: Removed references to pmbus_do_remove from documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
4d01eb0b |
| 26-Oct-2020 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
hwmon: (pmbus) shrink code and remove pmbus_do_remove()
The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe time and re
hwmon: (pmbus) shrink code and remove pmbus_do_remove()
The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe time and remove pmbus_do_remove() entirely from all pmbus drivers.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20201026105352.20359-1-brgl@bgdev.pl [groeck: Removed references to pmbus_do_remove from documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 3bce071a301f44ffd08bada9b2e8238b625f8f8c) Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
Revision tags: v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58 |
|
#
dd431939 |
| 08-Aug-2020 |
Stephen Kitt <steve@sk2.org> |
hwmon (pmbus) use simple i2c probe function
pmbus_do_probe doesn't use the id information provided in its second argument, so this can be removed, which then allows using the single-parameter i2c pr
hwmon (pmbus) use simple i2c probe function
pmbus_do_probe doesn't use the id information provided in its second argument, so this can be removed, which then allows using the single-parameter i2c probe function ("probe_new") for probes.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did are modified as follows:
* if the information in i2c_client is sufficient, that's used instead (client->name); * configured v. probed comparisons are performed by comparing the configured name to the detected name, instead of the ids; this involves strcmp but is still cheaper than comparing all the device names when scanning the tables; * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before.
Additionally, the mismatch message in the ltc2978 driver is adjusted so that it no longer assumes that the driver_data is an index into ltc2978_id.
Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15 |
|
#
6f944004 |
| 24-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667
TPS53647 and TPS53667 are single channel, Step-Down Buck Controllers. TPS53647 supports 4 phases, TPS53667 supports 6 phases. The chips
hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667
TPS53647 and TPS53667 are single channel, Step-Down Buck Controllers. TPS53647 supports 4 phases, TPS53667 supports 6 phases. The chips do not support per-phase output telemetry.
Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.4.14 |
|
#
53030bcc |
| 20-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for TPS53681
TPS53681 is a dual-channel multiphase step-down controller supporting per-phase and per-channel output telemetry.
Cc: Vadim Pasternak <vadimp@mellan
hwmon: (pmbus/tps53679) Add support for TPS53681
TPS53681 is a dual-channel multiphase step-down controller supporting per-phase and per-channel output telemetry.
Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
39c749ac |
| 28-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688
All chips of this series with published datasheets support IIN, PIN, and STATUS_INPUT PMBus commands. Per TI Power Manage
hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688
All chips of this series with published datasheets support IIN, PIN, and STATUS_INPUT PMBus commands. Per TI Power Management Forum, "TPS53679 and TPS53681 have the same PMBus command set". There is no reason to believe that this does not apply to TPS53688. Let's assume that this is correct and add support for IIN, PIN, and STATUS_INPUT to TPS53679 and TPS53688 to simplify adding support for more chips of the same series.
At the same time, drop reporting VIN on channel 2. On chips with published datasheets this voltage is identical to the voltage reported on channel 1, and there is no reason to believe that this is different for TPS53679 and TPS53888.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
63eb4587 |
| 24-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for multiple chips IDs
Chip specific support will be needed in the driver to be able to support additional chips of the same series. Add support for it to the dri
hwmon: (pmbus/tps53679) Add support for multiple chips IDs
Chip specific support will be needed in the driver to be able to support additional chips of the same series. Add support for it to the driver.
To simplify adding support for more chips, call identification code from the probe function. This lets us use a single structure for common elements of struct pmbus_driver_info, thus reducing code size as support for more chips is added.
Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.4.13, v5.4.12 |
|
#
583dc921 |
| 13-Jan-2020 |
Vadim Pasternak <vadimp@mellanox.com> |
hwmon: (pmbus/tps53679) Extend device list supported by driver
Extends driver with support of the additional devices: Texas Instruments Dual channel DCAP+ multiphase controllers: TPS53688.
Extend K
hwmon: (pmbus/tps53679) Extend device list supported by driver
Extends driver with support of the additional devices: Texas Instruments Dual channel DCAP+ multiphase controllers: TPS53688.
Extend Kconfig with added device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-4-vadimp@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
b9fa0a3a |
| 13-Jan-2020 |
Vadim Pasternak <vadimp@mellanox.com> |
hwmon: (pmbus/core) Add support for vid mode detection per page bases
Add support for VID protocol detection per page bases, instead of detecting it based on "PMBU_VOUT" readout from page 0 for all
hwmon: (pmbus/core) Add support for vid mode detection per page bases
Add support for VID protocol detection per page bases, instead of detecting it based on "PMBU_VOUT" readout from page 0 for all the pages supported by particular device. The reason that some devices allows to configure different VID modes per page within the same device. Patch modifies the field "vrm_version" within the structure "pmbus_driver_info" to be per page array.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-2-vadimp@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
c942fddf |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7 |
|
#
e91cb17b |
| 04-Apr-2019 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Fix build warning
If CONFIG_OF is not enabled, the following build warning is observed.
drivers/hwmon/pmbus/tps53679.c:100:34: warning: ‘tps53679_of_match’ defined but not
hwmon: (pmbus/tps53679) Fix build warning
If CONFIG_OF is not enabled, the following build warning is observed.
drivers/hwmon/pmbus/tps53679.c:100:34: warning: ‘tps53679_of_match’ defined but not used
Marking tps53679_of_match as __maybe_unused fixes the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24 |
|
#
ff066653 |
| 18-Feb-2019 |
Vadim Pasternak <vadimp@mellanox.com> |
hwmon: (pmbus/tps53679) Fix driver info initialization in probe routine
Fix tps53679_probe() by using dynamically allocated "pmbus_driver_info" structure instead of static. Usage of static structure
hwmon: (pmbus/tps53679) Fix driver info initialization in probe routine
Fix tps53679_probe() by using dynamically allocated "pmbus_driver_info" structure instead of static. Usage of static structures causes overwritten of the field "vrm_version", in case the system is equipped with several tps53679 devices with the different "vrm_version". In such case the last probed device overwrites this field for all others.
Fixes: 610526527a13 ("hwmon: (pmbus) Add support for Texas Instruments tps53679 device") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13 |
|
#
61052652 |
| 30-Aug-2017 |
Vadim Pasternak <vadimp@mellanox.com> |
hwmon: (pmbus) Add support for Texas Instruments tps53679 device
The below lists of VOUT_MODE command readout with their related VID protocols, Digital to Analog Converter steps, supported by the de
hwmon: (pmbus) Add support for Texas Instruments tps53679 device
The below lists of VOUT_MODE command readout with their related VID protocols, Digital to Analog Converter steps, supported by the device: VR12.0 mode, 5-mV DAC - 0x21 VR12.5 mode, 10-mV DAC - 0x22 VR13.0 mode, 10-mV DAC - 0x24 IMVP8 mode, 5-mV DAC - 0x25 VR13.0 mode, 5-mV DAC - 0x27
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
4d01eb0b |
| 26-Oct-2020 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
hwmon: (pmbus) shrink code and remove pmbus_do_remove() The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe
hwmon: (pmbus) shrink code and remove pmbus_do_remove() The only action currently performed in pmbus_do_remove() is removing the debugfs hierarchy. We can schedule a devm action at probe time and remove pmbus_do_remove() entirely from all pmbus drivers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20201026105352.20359-1-brgl@bgdev.pl [groeck: Removed references to pmbus_do_remove from documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 3bce071a301f44ffd08bada9b2e8238b625f8f8c) Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
Revision tags: v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58 |
|
#
dd431939 |
| 08-Aug-2020 |
Stephen Kitt <steve@sk2.org> |
hwmon (pmbus) use simple i2c probe function pmbus_do_probe doesn't use the id information provided in its second argument, so this can be removed, which then allows using the single-
hwmon (pmbus) use simple i2c probe function pmbus_do_probe doesn't use the id information provided in its second argument, so this can be removed, which then allows using the single-parameter i2c probe function ("probe_new") for probes. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified as follows: * if the information in i2c_client is sufficient, that's used instead (client->name); * configured v. probed comparisons are performed by comparing the configured name to the detected name, instead of the ids; this involves strcmp but is still cheaper than comparing all the device names when scanning the tables; * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before. Additionally, the mismatch message in the ltc2978 driver is adjusted so that it no longer assumes that the driver_data is an index into ltc2978_id. Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15 |
|
#
6f944004 |
| 24-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667 TPS53647 and TPS53667 are single channel, Step-Down Buck Controllers. TPS53647 supports 4 phases, TPS53667 supports 6 phases
hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667 TPS53647 and TPS53667 are single channel, Step-Down Buck Controllers. TPS53647 supports 4 phases, TPS53667 supports 6 phases. The chips do not support per-phase output telemetry. Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.4.14 |
|
#
53030bcc |
| 20-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for TPS53681 TPS53681 is a dual-channel multiphase step-down controller supporting per-phase and per-channel output telemetry. Cc: Vadim Past
hwmon: (pmbus/tps53679) Add support for TPS53681 TPS53681 is a dual-channel multiphase step-down controller supporting per-phase and per-channel output telemetry. Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
39c749ac |
| 28-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688 All chips of this series with published datasheets support IIN, PIN, and STATUS_INPUT PMBus commands. Per TI
hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688 All chips of this series with published datasheets support IIN, PIN, and STATUS_INPUT PMBus commands. Per TI Power Management Forum, "TPS53679 and TPS53681 have the same PMBus command set". There is no reason to believe that this does not apply to TPS53688. Let's assume that this is correct and add support for IIN, PIN, and STATUS_INPUT to TPS53679 and TPS53688 to simplify adding support for more chips of the same series. At the same time, drop reporting VIN on channel 2. On chips with published datasheets this voltage is identical to the voltage reported on channel 1, and there is no reason to believe that this is different for TPS53679 and TPS53888. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
#
63eb4587 |
| 24-Jan-2020 |
Guenter Roeck <linux@roeck-us.net> |
hwmon: (pmbus/tps53679) Add support for multiple chips IDs Chip specific support will be needed in the driver to be able to support additional chips of the same series. Add support for i
hwmon: (pmbus/tps53679) Add support for multiple chips IDs Chip specific support will be needed in the driver to be able to support additional chips of the same series. Add support for it to the driver. To simplify adding support for more chips, call identification code from the probe function. This lets us use a single structure for common elements of struct pmbus_driver_info, thus reducing code size as support for more chips is added. Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
Revision tags: v5.4.13, v5.4.12 |
|
#
583dc921 |
| 13-Jan-2020 |
Vadim Pasternak <vadimp@mellanox.com> |
hwmon: (pmbus/tps53679) Extend device list supported by driver Extends driver with support of the additional devices: Texas Instruments Dual channel DCAP+ multiphase controllers: TPS5368
hwmon: (pmbus/tps53679) Extend device list supported by driver Extends driver with support of the additional devices: Texas Instruments Dual channel DCAP+ multiphase controllers: TPS53688. Extend Kconfig with added device. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-4-vadimp@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|