|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37 |
|
| #
849b0156 |
| 27-Apr-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
|
Revision tags: v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24 |
|
| #
a03d8969 |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit 1 is set,
GPU1 is throttling).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-4-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
a25126fc |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
Signed-off-b
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-3-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
6109c3e1 |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
t
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
the other OCC-specific data.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-2-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
cf8e9f21 |
| 27-Apr-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
daaee92e |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit 1 is set,
GPU1 is throttling).
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
6a0be74b |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Stag
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
afa95fee |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
t
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
the other OCC-specific data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
cf8e9f21 |
| 27-Apr-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
daaee92e |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit 1 is set,
GPU1 is throttling).
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
6a0be74b |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Stag
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
afa95fee |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
t
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
the other OCC-specific data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
cf8e9f21 |
| 27-Apr-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
daaee92e |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit 1 is set,
GPU1 is throttling).
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
6a0be74b |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Stag
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
afa95fee |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
t
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
the other OCC-specific data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
cf8e9f21 |
| 27-Apr-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
daaee92e |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit 1 is set,
GPU1 is throttling).
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
6a0be74b |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Stag
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
afa95fee |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
t
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
the other OCC-specific data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
cf8e9f21 |
| 27-Apr-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|
| #
daaee92e |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit 1 is set,
GPU1 is throttling).
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
6a0be74b |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Stag
hwmon: (occ) Add sysfs entry for OCC mode
BMC control applications need to check the OCC mode returned by the
OCC poll response, so export it in sysfs with the other OCC-specific
data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
afa95fee |
| 15-Feb-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
t
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
the other OCC-specific data.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220215151022.7498-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
show more ...
|
| #
cf8e9f21 |
| 27-Apr-2022 |
Eddie James <eajames@linux.ibm.com> |
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for
hwmon: (occ) Delay hwmon registration until user request
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
show more ...
|