HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up

commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream.

The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
Howeve

HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up

commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream.

The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
However, this is not necessary, because I2C core already has its own
locking for that.

More importantly, this flag can cause a lock-up: if the flag is set in
i2c_hid_xfer() and an interrupt happens, the interrupt handler
(i2c_hid_irq) will check this flag and return immediately without doing
anything, then the interrupt handler will be invoked again in an
infinite loop.

Since interrupt handler is an RT task, it takes over the CPU and the
flag-clearing task never gets scheduled, thus we have a lock-up.

Delete this unnecessary flag.

Reported-and-tested-by: Eva Kurchatova <nyandarknessgirl@gmail.com>
Closes: https://lore.kernel.org/r/CA+eeCSPUDpUg76ZO8dszSbAGn+UHjcyv8F1J-CUPVARAzEtW9w@mail.gmail.com
Fixes: 4a200c3b9a40 ("HID: i2c-hid: introduce HID over i2c specification implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up

commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream.

The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
Howeve

HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up

commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream.

The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
However, this is not necessary, because I2C core already has its own
locking for that.

More importantly, this flag can cause a lock-up: if the flag is set in
i2c_hid_xfer() and an interrupt happens, the interrupt handler
(i2c_hid_irq) will check this flag and return immediately without doing
anything, then the interrupt handler will be invoked again in an
infinite loop.

Since interrupt handler is an RT task, it takes over the CPU and the
flag-clearing task never gets scheduled, thus we have a lock-up.

Delete this unnecessary flag.

Reported-and-tested-by: Eva Kurchatova <nyandarknessgirl@gmail.com>
Closes: https://lore.kernel.org/r/CA+eeCSPUDpUg76ZO8dszSbAGn+UHjcyv8F1J-CUPVARAzEtW9w@mail.gmail.com
Fixes: 4a200c3b9a40 ("HID: i2c-hid: introduce HID over i2c specification implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up

commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream.

The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
Howeve

HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up

commit 9c0f59e47a90c54d0153f8ddc0f80d7a36207d0e upstream.

The flag I2C_HID_READ_PENDING is used to serialize I2C operations.
However, this is not necessary, because I2C core already has its own
locking for that.

More importantly, this flag can cause a lock-up: if the flag is set in
i2c_hid_xfer() and an interrupt happens, the interrupt handler
(i2c_hid_irq) will check this flag and return immediately without doing
anything, then the interrupt handler will be invoked again in an
infinite loop.

Since interrupt handler is an RT task, it takes over the CPU and the
flag-clearing task never gets scheduled, thus we have a lock-up.

Delete this unnecessary flag.

Reported-and-tested-by: Eva Kurchatova <nyandarknessgirl@gmail.com>
Closes: https://lore.kernel.org/r/CA+eeCSPUDpUg76ZO8dszSbAGn+UHjcyv8F1J-CUPVARAzEtW9w@mail.gmail.com
Fixes: 4a200c3b9a40 ("HID: i2c-hid: introduce HID over i2c specification implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

HID: i2c-hid: fix handling of unpopulated devices

A recent commit reordered probe so that the interrupt line is now
requested before making sure that the device exists.

This breaks machines like th

HID: i2c-hid: fix handling of unpopulated devices

A recent commit reordered probe so that the interrupt line is now
requested before making sure that the device exists.

This breaks machines like the Lenovo ThinkPad X13s which rely on the
HID driver to probe second-source devices and only register the variant
that is actually populated. Specifically, the interrupt line may now
already be (temporarily) claimed when doing asynchronous probing of the
touchpad:

genirq: Flags mismatch irq 191. 00082008 (hid-over-i2c) vs. 00082008 (hid-over-i2c)
i2c_hid_of 21-0015: Could not register for hid-over-i2c interrupt, irq = 191, ret = -16
i2c_hid_of: probe of 21-0015 failed with error -16

Fix this by restoring the old behaviour of first making sure the device
exists before requesting the interrupt line.

Note that something like this should probably be implemented also for
"panel followers", whose actual probe is currently effectively deferred
until the DRM panel is probed (e.g. by powering down the device after
making sure it exists and only then register it as a follower).

Fixes: 675cd877c952 ("HID: i2c-hid: Rearrange probe() to power things up later")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231002155857.24584-1-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

show more ...

HID: i2c-hid: Do panel follower work on the system_wq

Turning on an i2c-hid device can be a slow process. This is why
i2c-hid devices use PROBE_PREFER_ASYNCHRONOUS. Unfortunately, when
we're a panel

HID: i2c-hid: Do panel follower work on the system_wq

Turning on an i2c-hid device can be a slow process. This is why
i2c-hid devices use PROBE_PREFER_ASYNCHRONOUS. Unfortunately, when
we're a panel follower the i2c-hid power up sequence now blocks the
power on of the panel. Let's fix that by scheduling the work on the
system_wq.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.10.I962bb462ede779005341c49320740ed95810021d@changeid

show more ...

HID: i2c-hid: Support being a panel follower

As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), we really want to keep the power states of a
touchscreen a

HID: i2c-hid: Support being a panel follower

As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), we really want to keep the power states of a
touchscreen and the panel it's attached to in sync with each other. In
that spirit, add support to i2c-hid to be a panel follower. This will
let the i2c-hid driver get informed when the panel is powered on and
off. From there we can match the i2c-hid device's power state to that
of the panel.

NOTE: this patch specifically _doesn't_ use pm_runtime to keep track
of / manage the power state of the i2c-hid device, even though my
first instinct said that would be the way to go. Specific problems
with using pm_runtime():
* The initial power up couldn't happen in a runtime resume function
since it create sub-devices and, apparently, that's not good to do
in your resume function.
* Managing our power state with pm_runtime meant fighting to make the
right thing happen at system suspend to prevent the system from
trying to resume us only to suspend us again. While this might be
able to be solved, it added complexity.
Overall the code without pm_runtime() ended up being smaller and
easier to understand.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.9.Ib1a98309c455cd7e26b931c69993d4fba33bbe15@changeid

show more ...

HID: i2c-hid: Suspend i2c-hid devices in remove

In the i2c-hid remove() function we currently try to power off,
depopulate our child device, and free our resources. That's OK, but...

* If the i2c-h

HID: i2c-hid: Suspend i2c-hid devices in remove

In the i2c-hid remove() function we currently try to power off,
depopulate our child device, and free our resources. That's OK, but...

* If the i2c-hid device is on a power rail that can't turn off (either
an always-on or a shared power rail) we won't try to put the device
in a low power state during remove(). This probably doesn't matter
for very many devices but it could be nice in some instances.

* If the i2c-hid device somehow manages to generate an interrupt after
we tried to power off it is conceivable that the interrupt could
arrive during or after the call to hid_destroy_device() but before
the call to free_irq(). That could cause a crash since our IRQ
handler isn't expecting it. One could imagine this happening in
the case where we couldn't turn off (see the previous bullet) or,
possibly, if the interrupt line could glitch shortly after the
device powered off.

Let's call the suspend code during remove to avoid these issues. That
will put the device into a low power state and also disable
interrupts.

Technically, one could consider this a "fix" of commit 4a200c3b9a40
("HID: i2c-hid: introduce HID over i2c specification implementation").
However, since the above bullet points are more theoretical than
problems seen on real systems and since the remove() of an i2c-hid
touchscreen isn't terribly likely to be called in production, it's
probably not worth the bother of trying to backport it.

Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.8.Ic3ecad4a825905f4e4ce2a772b17f3c9cb2d60a2@changeid

show more ...

HID: i2c-hid: Make suspend and resume into helper functions

In a future patch we'd like to be able to call the current i2c-hid
suspend and resume functions from times other than system
suspend. Move

HID: i2c-hid: Make suspend and resume into helper functions

In a future patch we'd like to be able to call the current i2c-hid
suspend and resume functions from times other than system
suspend. Move the functions higher up in the file and have them take a
"struct i2c_hid" to make this simpler. We'll then add tiny wrappers of
the functions for use with system suspend.

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.7.I5c9894789b8b02f029bf266ae9b4f43c7907a173@changeid

show more ...

HID: i2c-hid: Rearrange probe() to power things up later

In a future patch, we want to change i2c-hid not to necessarily power
up the touchscreen during probe. In preparation for that, rearrange
the

HID: i2c-hid: Rearrange probe() to power things up later

In a future patch, we want to change i2c-hid not to necessarily power
up the touchscreen during probe. In preparation for that, rearrange
the probe function so that we put as much stuff _before_ powering up
the device as possible.

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.6.Ifcc9b0a44895d164788966f9b9511fe094ca8cf9@changeid

show more ...

HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS()

The SYSTEM_SLEEP_PM_OPS() allows us to get rid of '#ifdef
CONFIG_PM_SLEEP', as talked about in commit 1a3c7bb08826 ("PM: core:
Add new *_PM_OPS macros,

HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS()

The SYSTEM_SLEEP_PM_OPS() allows us to get rid of '#ifdef
CONFIG_PM_SLEEP', as talked about in commit 1a3c7bb08826 ("PM: core:
Add new *_PM_OPS macros, deprecate old ones").

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.5.Ib2a2865bd3c0b068432259dfc7d76cebcbb512be@changeid

show more ...

HID: retain initial quirks set up when creating HID devices

In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
T

HID: retain initial quirks set up when creating HID devices

In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
The source of such quirks may be device tree, or DMI data, or something
else not readily available to the HID core itself and therefore cannot
be reconstructed easily. To allow this, introduce "initial_quirks" field
in hid_device structure and use it when determining the final set of
quirks.

This fixes the problem with i2c-hid setting up device-tree sourced
quirks too late and losing them on device rebind, and also allows to
sever the tie between hid-code and i2c-hid when applying DMI-based
quirks.

Fixes: b60d3c803d76 ("HID: i2c-hid-of: Expose the touchscreen-inverted properties")
Fixes: a2f416bf062a ("HID: multitouch: Add quirks for flipped axes")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

show more ...

HID: i2c-hid: use uniform debugging APIs

Only two locations in i2c-hid are using the standard dev_dbg() APIs.
The rest are all using the custom i2c_hid_dbg(), which in turn uses
dev_dbg().

Signed-o

HID: i2c-hid: use uniform debugging APIs

Only two locations in i2c-hid are using the standard dev_dbg() APIs.
The rest are all using the custom i2c_hid_dbg(), which in turn uses
dev_dbg().

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: i2c-hid: switch to standard debugging APIs

Instead of implementing a custom form of dynamic debugging we can use
the standard debugging APIs. If the kernel is built with
CONFIG_DYNAMIC_DEBUG th

HID: i2c-hid: switch to standard debugging APIs

Instead of implementing a custom form of dynamic debugging we can use
the standard debugging APIs. If the kernel is built with
CONFIG_DYNAMIC_DEBUG this will be more discoverable and featureful.

Also the previous module parameter "debug" is read-only so it can't
actually be enabled.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: Make lowlevel driver structs const

Nothing is nor should be modifying these structs so mark them as const.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg

HID: Make lowlevel driver structs const

Nothing is nor should be modifying these structs so mark them as const.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: Unexport struct i2c_hid_ll_driver

As there are no external users this implementation detail does not need
to be exported.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Da

HID: Unexport struct i2c_hid_ll_driver

As there are no external users this implementation detail does not need
to be exported.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: i2c-hid: Don't set wake_capable and wake_irq

The i2c-core will now handle setting the wake_irq for DT and ACPI
systems.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Benjamin T

HID: i2c-hid: Don't set wake_capable and wake_irq

The i2c-core will now handle setting the wake_irq for DT and ACPI
systems.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220929093200.v6.10.Id22d056440953134d8e8fe2c2aff79c79bc78424@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

HID: i2c-hid: Use PM subsystem to manage wake irq

The I2C hid driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies

HID: i2c-hid: Use PM subsystem to manage wake irq

The I2C hid driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.

i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.

I tested this on an ACPI system that has a HID touchscreen and verified
the IRQ was armed for wake on suspend.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220929093200.v6.1.Id4b4bdfe06e2caf2d5a3c9dd4a9b1080c38b539c@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

HID: i2c: let RMI devices decide what constitutes wakeup event

HID-RMI is special in the sense that it does not carry HID events
directly, but rather uses HID protocol as a wrapper/transport for RMI

HID: i2c: let RMI devices decide what constitutes wakeup event

HID-RMI is special in the sense that it does not carry HID events
directly, but rather uses HID protocol as a wrapper/transport for RMI
protocol. Therefore we should not assume that all data coming from the
device via interrupt is associated with user activity and report wakeup
event indiscriminately, but rather let HID-RMI do that when appropriate.

HID-RMI devices tag responses to the commands issued by the host as
RMI_READ_DATA_REPORT_ID whereas motion and other input events from the
device are tagged as RMI_ATTN_REPORT_ID. Change hid-rmi to report wakeup
events when receiving the latter packets. This allows ChromeOS to
accurately identify wakeup source and make correct decision on the mode
of the resume the system should take ("dark" where the display stays off
vs normal one).

Fixes: d951ae1ce803 ("HID: i2c-hid: Report wakeup events")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by

HID: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

show more ...

HID: i2c-hid: remove unneeded semicolon

Eliminate the following coccicheck warning:
./drivers/hid/i2c-hid/i2c-hid-core.c:357:56-57: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.

HID: i2c-hid: remove unneeded semicolon

Eliminate the following coccicheck warning:
./drivers/hid/i2c-hid/i2c-hid-core.c:357:56-57: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: i2c-hid: note that I2C xfer buffers are DMA-safe

All I2C communications in the driver use driver-private buffers that are
DMA-safe, so mark them as such.

Signed-off-by: Dmitry Torokhov <dmitry

HID: i2c-hid: note that I2C xfer buffers are DMA-safe

All I2C communications in the driver use driver-private buffers that are
DMA-safe, so mark them as such.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: i2c-hid: no longer need raw access to HID descriptor structure

We can stop defining a union for HID descriptor data as we now only access
individual members of it by names and using proper type

HID: i2c-hid: no longer need raw access to HID descriptor structure

We can stop defining a union for HID descriptor data as we now only access
individual members of it by names and using proper types instead of
accessing by offset from the beginning of the data structure.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: i2c-hid: use helpers to do endian conversion in i2c_hid_get_input()

It is better to use helpers to do endian conversion as it documents
and draws attention to it, and might be a bit more perfor

HID: i2c-hid: use helpers to do endian conversion in i2c_hid_get_input()

It is better to use helpers to do endian conversion as it documents
and draws attention to it, and might be a bit more performant as
well.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

HID: i2c-hid: rework i2c_hid_get_report() to use i2c_hid_xfer()

Explicitly prepare command for i2c_hid_get_report() which makes the logic
clearer and allows us to get rid of __i2c_hid_command() and

HID: i2c-hid: rework i2c_hid_get_report() to use i2c_hid_xfer()

Explicitly prepare command for i2c_hid_get_report() which makes the logic
clearer and allows us to get rid of __i2c_hid_command() and related command
definitions.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...