drm/v3d: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()

A proposed update to clang's -Wconstant-logical-operand to warn when the
left hand side is a constant shows the following inst

drm/v3d: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()

A proposed update to clang's -Wconstant-logical-operand to warn when the
left hand side is a constant shows the following instance in
nsecs_to_jiffies_timeout() when NSEC_PER_SEC is not a multiple of HZ,
such as CONFIG_HZ=300:

In file included from drivers/gpu/drm/v3d/v3d_debugfs.c:12:
drivers/gpu/drm/v3d/v3d_drv.h:343:24: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
343 | if (NSEC_PER_SEC % HZ &&
| ~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: use '&' for a bitwise operation
343 | if (NSEC_PER_SEC % HZ &&
| ^~
| &
drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: remove constant to silence this warning
1 warning generated.

Turn this into an explicit comparison against zero to make the
expression a boolean to make it clear this should be a logical check,
not a bitwise one.

Link: https://reviews.llvm.org/D142609
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-nsecs_to_jiffies_timeout-constant-logical-operand-v1-1-36ed8fc8faea@kernel.org

show more ...

drm/v3d: add multiple syncobjs support

Using the generic extension from the previous patch, a specific multisync
extension enables more than one in/out binary syncobj per job submission.
Arrays of s

drm/v3d: add multiple syncobjs support

Using the generic extension from the previous patch, a specific multisync
extension enables more than one in/out binary syncobj per job submission.
Arrays of syncobjs are set in struct drm_v3d_multisync, that also cares
of determining the stage for sync (wait deps) according to the job
queue.

v2:
- subclass the generic extension struct (Daniel)
- simplify adding dependency conditions to make understandable (Iago)

v3:
- fix conditions to consider single or multiples in/out_syncs (Iago)
- remove irrelevant comment (Iago)

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffd8b2e3dd2e0c686db441a0c0a4a0181ff85328.1633016479.git.mwen@igalia.com

show more ...

drm/v3d: Use scheduler dependency handling

With the prep work out of the way this isn't tricky anymore.

Aside: The chaining of the various jobs is a bit awkward, with the
possibility of failure in

drm/v3d: Use scheduler dependency handling

With the prep work out of the way this isn't tricky anymore.

Aside: The chaining of the various jobs is a bit awkward, with the
possibility of failure in bad places. I think with the
drm_sched_job_init/arm split and maybe preloading the
job->dependencies xarray this should be fixable.

v2: Rebase over renamed function names for adding dependencies.

Reviewed-by: Melissa Wen <mwen@igalia.com> (v1)
Acked-by: Emma Anholt <emma@anholt.net>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-11-daniel.vetter@ffwll.ch

show more ...

drm/v3d: Move drm_sched_job_init to v3d_job_init

Prep work for using the scheduler dependency handling. We need to call
drm_sched_job_init earlier so we can use the new drm_sched_job_await*
function

drm/v3d: Move drm_sched_job_init to v3d_job_init

Prep work for using the scheduler dependency handling. We need to call
drm_sched_job_init earlier so we can use the new drm_sched_job_await*
functions for dependency handling here.

v2: Slightly better commit message and rebase to include the
drm_sched_job_arm() call (Emma).

v3: Cleanup jobs under construction correctly (Emma)

v4: Rebase over perfmon patch

Reviewed-by: Melissa Wen <mwen@igalia.com> (v3)
Acked-by: Emma Anholt <emma@anholt.net>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emma Anholt <emma@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-10-daniel.vetter@ffwll.ch

show more ...

drm/v3d: Expose performance counters to userspace

The V3D engine has several hardware performance counters that can of
interest for userspace performance analysis tools.

This exposes new ioctls to

drm/v3d: Expose performance counters to userspace

The V3D engine has several hardware performance counters that can of
interest for userspace performance analysis tools.

This exposes new ioctls to create and destroy performance monitor
objects, as well as to query the counter values.

Each created performance monitor object has an ID that can be attached
to CL/CSD submissions, so the driver enables the requested counters when
the job is submitted, and updates the performance monitor values when
the job is done.

It is up to the user to ensure all the jobs have been finished before
getting the performance monitor values. It is also up to the user to
properly synchronize BCL jobs when submitting jobs with different
performance monitors attached.

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608111541.461991-1-jasuarez@igalia.com

show more ...

drm/v3d: Delete v3d_dev->pdev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check wh

drm/v3d: Delete v3d_dev->pdev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whether the pointer is for the same or
different objects if there's multiple
- compilers have an easier time too

To avoid having to pull in some big headers I implemented the casting
function as a macro instead of a static inline. Typechecking thanks to
container_of still assured.

But also a bit a bikeshed, so feel free to ignore.

v2: More parens for v3d_to_pdev macro (checkpatch)

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-11-daniel.vetter@ffwll.ch

show more ...

drm/v3d: Delete v3d_dev->dev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whe

drm/v3d: Delete v3d_dev->dev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whether the pointer is for the same or
different objects if there's multiple
- compilers have an easier time too

But also a bit a bikeshed, so feel free to ignore.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-10-daniel.vetter@ffwll.ch

show more ...

drm/v3d: Don't set drm_device->dev_private

And switch the helper over to container_of, which is a bunch faster
than chasing a pointer. Plus allows gcc to see through this maze.

Acked-by: Eric Anhol

drm/v3d: Don't set drm_device->dev_private

And switch the helper over to container_of, which is a bunch faster
than chasing a pointer. Plus allows gcc to see through this maze.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-8-daniel.vetter@ffwll.ch

show more ...

drm: convert .debugfs_init() hook to return void.

As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core a

drm: convert .debugfs_init() hook to return void.

As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.

This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.

v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.

References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com

show more ...

drm/v3d: Replace wait_for macros to remove use of msleep

The wait_for macro's for Broadcom V3D driver used msleep, which is
inappropriate due to its inaccuracy at low values (minimum wait time
is ab

drm/v3d: Replace wait_for macros to remove use of msleep

The wait_for macro's for Broadcom V3D driver used msleep, which is
inappropriate due to its inaccuracy at low values (minimum wait time
is about 30ms on the Raspberry Pi). This sleep was triggering in
v3d_clean_caches(), causing us to only be able to dispatch ~33 compute
jobs per second.

This patch replaces the macro with the one from the Intel i915 version
which uses usleep_range to provide more accurate waits.

v2: Split from the vc4 patch so that we can confidently apply to
stable (by anholt)

Signed-off-by: James Hughes <james.hughes@raspberrypi.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200217153145.13780-1-james.hughes@raspberrypi.com
Link: https://github.com/raspberrypi/linux/issues/3460
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")

show more ...

drm/v3d: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Made v3d_drv.h self-contained with only sufficient
include files.
Fixed fallout in remaining files.

Signed-off-by: Sam Rav

drm/v3d: drop use of drmP.h

Drop use of the deprecated drmP.h header file.
Made v3d_drv.h self-contained with only sufficient
include files.
Fixed fallout in remaining files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-3-sam@ravnborg.org

show more ...

drm/v3d: Fix and extend MMU error handling.

We were setting the wrong flags to enable PTI errors, so we were
seeing reads to invalid PTEs show up as write errors. Also, we
weren't turning on the in

drm/v3d: Fix and extend MMU error handling.

We were setting the wrong flags to enable PTI errors, so we were
seeing reads to invalid PTEs show up as write errors. Also, we
weren't turning on the interrupts. The AXI IDs we were dumping
included the outstanding write number and so they looked basically
random. And the VIO_ADDR decoding was based on the MMU VA_WIDTH for
the first platform I worked on and was wrong on others. In short,
this was a thorough mess from early HW enabling.

Tested on V3D 4.1 and 4.2 with intentional L2T, CLE, PTB, and TLB
faults.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419001014.23579-4-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

show more ...

drm/v3d: Add missing implicit synchronization.

It is the expectation of existing userspace (X11 + Mesa, in
particular) that jobs submitted to the kernel against a shared BO will
get implicitly synch

drm/v3d: Add missing implicit synchronization.

It is the expectation of existing userspace (X11 + Mesa, in
particular) that jobs submitted to the kernel against a shared BO will
get implicitly synchronized by their submission order. If we want to
allow clever userspace to disable implicit synchronization, we should
do that under its own submit flag (as amdgpu and lima do).

Note that we currently only implicitly sync for the rendering pass,
not binning -- if you texture-from-pixmap in the binning vertex shader
(vertex coordinate generation), you'll miss out on synchronization.

Fixes flickering when multiple clients are running in parallel,
particularly GL apps and compositors.

v2: Fix a missing refcount on the CSD done fence for L2 cleaning.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-6-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

show more ...

drm/v3d: Add support for compute shader dispatch.

The compute shader dispatch interface is pretty simple -- just pass in
the regs that userspace has passed us, with no CLs to run. However,
with no

drm/v3d: Add support for compute shader dispatch.

The compute shader dispatch interface is pretty simple -- just pass in
the regs that userspace has passed us, with no CLs to run. However,
with no CL to run it means that we need to do manual cache flushing of
the L2 after the HW execution completes (for SSBO, atomic, and
image_load_store writes that are the output of compute shaders).

This doesn't yet expose the L2 cache's ability to have a region of the
address space not write back to memory (which could be used for
shared_var storage).

So far, the Mesa side has been tested on V3D v4.2 simpenrose (passing
the ES31 tests), and on the kernel side on 7278 (failing atomic
compswap tests in a way that doesn't reproduce on simpenrose).

v2: Fix excessive allocation for the clean_job (reported by Dan
Carpenter). Keep refs on jobs until clean_job is finished, to
avoid spurious MMU errors if the output BOs are freed by userspace
before L2 cleaning is finished.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-4-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

show more ...

drm/v3d: Refactor job management.

The CL submission had two jobs embedded in an exec struct. When I
added TFU support, I had to replicate some of the exec stuff and some
of the job stuff. As I wen

drm/v3d: Refactor job management.

The CL submission had two jobs embedded in an exec struct. When I
added TFU support, I had to replicate some of the exec stuff and some
of the job stuff. As I went to add CSD, it became clear that actually
what was in exec should just be in the two CL jobs, and it would let
us share a lot more code between the 4 queues.

v2: Fix missing error path in TFU ioctl's bo[] allocation.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-3-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

show more ...

drm/v3d: Switch the type of job-> to reduce casting.

All consumers wanted drm_gem_object * now.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/2019

drm/v3d: Switch the type of job-> to reduce casting.

All consumers wanted drm_gem_object * now.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416225856.20264-2-eric@anholt.net
Acked-by: Rob Clark <robdclark@gmail.com>

show more ...

drm/v3d: Rename the fence signaled from IRQs to "irq_fence".

We have another thing called the "done fence" that tracks when the
scheduler considers the job done, and having the shared name was
confu

drm/v3d: Rename the fence signaled from IRQs to "irq_fence".

We have another thing called the "done fence" that tracks when the
scheduler considers the job done, and having the shared name was
confusing.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313235211.28995-2-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

show more ...

drm/v3d: Use the new shmem helpers to reduce driver boilerplate.

The new shmem helpers from Noralf and Rob abstract out a bunch of our
BO creation and mapping code.

v2: Use the new sgt getter, and

drm/v3d: Use the new shmem helpers to reduce driver boilerplate.

The new shmem helpers from Noralf and Rob abstract out a bunch of our
BO creation and mapping code.

v2: Use the new sgt getter, and flag pages as dirty before freeing.
v3: Remove the mismatched put_pages.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314163451.13431-1-eric@anholt.net
Reviewed-by: Rob Herring <robh@kernel.org> (v2)

show more ...

drm/v3d: Remove some dead members of struct v3d_bo.

vmas was from the previous model of page table management (one per
fd), and vaddr was left over from vc4.

Signed-off-by: Eric Anholt <eric@anholt

drm/v3d: Remove some dead members of struct v3d_bo.

vmas was from the previous model of page table management (one per
fd), and vaddr was left over from vc4.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308161716.2466-4-eric@anholt.net
Acked-by: Rob Herring <robh@kernel.org>

show more ...

drm/v3d: Add support for V3D v4.2.

No compatible string for it yet, just the version-dependent changes.
They've now tied the hub and the core interrupt lines into a single
interrupt line coming out

drm/v3d: Add support for V3D v4.2.

No compatible string for it yet, just the version-dependent changes.
They've now tied the hub and the core interrupt lines into a single
interrupt line coming out of the block. It also turns out I made a
mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D
itself -- the bridge is going away in favor of an external reset
controller in a larger HW module.

v2: Use consistent checks for whether we're on 4.2, and fix a leak in
an error path.
v3: Use more general means of determining if the current 4.2 changes
are in place, as apparently other platforms may switch back (noted
by Dave). Update the binding doc.
v4: Improve error handling for IRQ init.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-2-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

show more ...

drm/v3d: Handle errors from IRQ setup.

Noted in review by Dave Emett for V3D 4.2 support.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/2019030817

drm/v3d: Handle errors from IRQ setup.

Noted in review by Dave Emett for V3D 4.2 support.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

show more ...

drm: v3d: Switch to use drm_gem_object reservation_object

Now that the base struct drm_gem_object has a reservation_object, use it
and remove the private BO one.

Cc: Eric Anholt <eric@anholt.net>
C

drm: v3d: Switch to use drm_gem_object reservation_object

Now that the base struct drm_gem_object has a reservation_object, use it
and remove the private BO one.

Cc: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202154158.10443-5-robh@kernel.org
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

drm/v3d: Drop unused v3d_flush_caches().

Now that I've specified how the end-of-pipeline flushing should work,
we're never going to use this function.

Signed-off-by: Eric Anholt <eric@anholt.net>
R

drm/v3d: Drop unused v3d_flush_caches().

Now that I've specified how the end-of-pipeline flushing should work,
we're never going to use this function.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-2-eric@anholt.net

show more ...

drm/v3d: Add support for submitting jobs to the TFU.

The TFU can copy from raster, UIF, and SAND input images to UIF output
images, with optional mipmap generation. This will certainly be
useful fo

drm/v3d: Add support for submitting jobs to the TFU.

The TFU can copy from raster, UIF, and SAND input images to UIF output
images, with optional mipmap generation. This will certainly be
useful for media EGL image input, but is also useful immediately for
mipmap generation without bogging the V3D core down.

For now we only run the queue 1 job deep, and don't have any hang
recovery (though I don't think we should need it, with TFU). Queuing
multiple jobs in the HW will require synchronizing the YUV coefficient
regs updates since they don't get FIFOed with the job.

v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain
why TFU is AUTH, clarify the syncing docs, drop the unused TFU
interrupt regs (you're expected to use the hub's), don't take
&bo->base for NULL bos.
v3: Fix a little whitespace alignment (noticed by checkpatch), rebase
on drm_sched_job_cleanup() changes.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Emett <david.emett@broadcom.com> (v2)
Link: https://patchwork.freedesktop.org/patch/264607/

show more ...

drm/v3d: Fix a use-after-free race accessing the scheduler's fences.

Once we push the job, the scheduler could run it and free it. So, if
we want to reference their fences, we need to grab them bef

drm/v3d: Fix a use-after-free race accessing the scheduler's fences.

Once we push the job, the scheduler could run it and free it. So, if
we want to reference their fences, we need to grab them before then.
I haven't seen this happen in many days of conformance test runtime,
but let's still close the race.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Link: https://patchwork.freedesktop.org/patch/254119/
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

show more ...