drm: gm12u320: Fix the timeout usage for usb_bulk_msg()

The timeout arg of usb_bulk_msg() is ms already, which has been converted
to jiffies by msecs_to_jiffies() in usb_start_wait_urb(). So fix the

drm: gm12u320: Fix the timeout usage for usb_bulk_msg()

The timeout arg of usb_bulk_msg() is ms already, which has been converted
to jiffies by msecs_to_jiffies() in usb_start_wait_urb(). So fix the usage
by removing the redundant msecs_to_jiffies() in the macros.

And as Hans suggested, also remove msecs_to_jiffies() for the IDLE_TIMEOUT
macro to make it consistent here and so change IDLE_TIMEOUT to
msecs_to_jiffies(IDLE_TIMEOUT) where it is used.

Fixes: e4f86e437164 ("drm: Add Grain Media GM12U320 driver v2")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230904021421.1663892-1-ruanjinjie@huawei.com

show more ...

drm: gm12u320: Remove #ifdef guards for PM related functions

Use the pm_ptr() macro to handle the .suspend / .resume / .reset_resume
callbacks.

This macro allows the suspend and resume functions to

drm: gm12u320: Remove #ifdef guards for PM related functions

Use the pm_ptr() macro to handle the .suspend / .resume / .reset_resume
callbacks.

This macro allows the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch. It also allows to drop the
__maybe_unused tags.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-11-paul@crapouillou.net

show more ...

drm/fb-helper: Move generic fbdev emulation into separate source file

Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the

drm/fb-helper: Move generic fbdev emulation into separate source file

Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de

show more ...

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm: Drop drm_edid.h from drm_crtc.h

drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.

Quite a few placs do curren

drm: Drop drm_edid.h from drm_crtc.h

drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.

Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

show more ...

dma-buf-map: Rename to iosys-map

Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's

dma-buf-map: Rename to iosys-map

Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's just a shim layer to abstract system memory, that
can be accessed via regular load and store, from IO memory that needs to
be acessed via arch helpers.

The idea is to extend this API so it can fulfill other needs, internal
to a single driver. Example: in the i915 driver it's desired to share
the implementation for integrated graphics, which uses mostly system
memory, with discrete graphics, which may need to access IO memory.

The conversion was mostly done with the following semantic patch:

@r1@
@@
- struct dma_buf_map
+ struct iosys_map

@r2@
@@
(
- DMA_BUF_MAP_INIT_VADDR
+ IOSYS_MAP_INIT_VADDR
|
- dma_buf_map_set_vaddr
+ iosys_map_set_vaddr
|
- dma_buf_map_set_vaddr_iomem
+ iosys_map_set_vaddr_iomem
|
- dma_buf_map_is_equal
+ iosys_map_is_equal
|
- dma_buf_map_is_null
+ iosys_map_is_null
|
- dma_buf_map_is_set
+ iosys_map_is_set
|
- dma_buf_map_clear
+ iosys_map_clear
|
- dma_buf_map_memcpy_to
+ iosys_map_memcpy_to
|
- dma_buf_map_incr
+ iosys_map_incr
)

@@
@@
- #include <linux/dma-buf-map.h>
+ #include <linux/iosys-map.h>

Then some files had their includes adjusted and some comments were
update to remove mentions to dma-buf-map.

Since this is not specific to dma-buf anymore, move the documentation to
the "Bus-Independent Device Accesses" section.

v2:
- Squash patches

v3:
- Fix wrong removal of dma-buf.h from MAINTAINERS
- Move documentation from dma-buf.rst to device-io.rst

v4:
- Change documentation title and level

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com

show more ...

drm/gm12u320: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
gm12u3

drm/gm12u320: Use offset-adjusted shadow-plane mappings

For framebuffers with non-zero offset fields, shadow-plane helpers
provide a pointer to the first byte of the contained data. Use it in
gm12u320.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803125928.27780-8-tzimmermann@suse.de

show more ...

drm/gm12u320: Use framebuffer dma-buf helpers

Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access();
same for _end_cpu_access(). Remove some boiler-plate code. No functional
changes.

drm/gm12u320: Use framebuffer dma-buf helpers

Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access();
same for _end_cpu_access(). Remove some boiler-plate code. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716140801.1215-6-tzimmermann@suse.de

show more ...

drm: Use USB controller's DMA mask when importing dmabufs

USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver

drm: Use USB controller's DMA mask when importing dmabufs

USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver
fails, which breaks joining and mirroring of display in X11.

For USB devices, pick the associated USB controller as attachment device.
This allows the DRM import helpers to perform the DMA setup. If the DMA
controller does not support DMA transfers, we're out of luck and cannot
import. Our current USB-based DRM drivers don't use DMA, so the actual
DMA device is not important.

Tested by joining/mirroring displays of udl and radeon under Gnome/X11.

v8:
* release dmadev if device initialization fails (Noralf)
* fix commit description (Noralf)
v7:
* fix use-before-init bug in gm12u320 (Dan)
v6:
* implement workaround in DRM drivers and hold reference to
DMA device while USB device is in use
* remove dev_is_usb() (Greg)
* collapse USB helper into usb_intf_get_dma_device() (Alan)
* integrate Daniel's TODO statement (Daniel)
* fix typos (Greg)
v5:
* provide a helper for USB interfaces (Alan)
* add FIXME item to documentation and TODO list (Daniel)
v4:
* implement workaround with USB helper functions (Greg)
* use struct usb_device->bus->sysdev as DMA device (Takashi)
v3:
* drop gem_create_object
* use DMA mask of USB controller, if any (Daniel, Christian, Noralf)
v2:
* move fix to importer side (Christian, Daniel)
* update SHMEM and CMA helpers for new PRIME callbacks

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices")
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

drm/gm12u320: Move vmap out of commit tail

Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the

drm/gm12u320: Move vmap out of commit tail

Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.

The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-7-tzimmermann@suse.de

show more ...

drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends

This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM b

drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends

This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.

TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.

v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de

show more ...

drm/tiny/gm12u320: Retrieve USB device from struct drm_device.dev

Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.

v3:
* upcast dev with gm12u320_to_usb_

drm/tiny/gm12u320: Retrieve USB device from struct drm_device.dev

Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.

v3:
* upcast dev with gm12u320_to_usb_device()
v2:
* upcast dev with drm_dev_get_usb_device()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103113456.3066-2-tzimmermann@suse.de

show more ...

drm/<drivers>: Constify struct drm_driver

Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- n

drm/<drivers>: Constify struct drm_driver

Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.

Note that for armada I also went ahead and made the ioctl array const.

Only cc'ing the driver people who've not been converted (everyone else
is way too much).

v2: Fix one misplaced const static, should be static const (0day)

v3:
- Improve commit message (Sam)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch

show more ...

drm: Use USB controller's DMA mask when importing dmabufs

commit 659ab7a49cbebe0deffcbe1f9560e82006b21817 upstream.

USB devices cannot perform DMA and hence have no dma_mask set in their
device str

drm: Use USB controller's DMA mask when importing dmabufs

commit 659ab7a49cbebe0deffcbe1f9560e82006b21817 upstream.

USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver
fails, which breaks joining and mirroring of display in X11.

For USB devices, pick the associated USB controller as attachment device.
This allows the DRM import helpers to perform the DMA setup. If the DMA
controller does not support DMA transfers, we're out of luck and cannot
import. Our current USB-based DRM drivers don't use DMA, so the actual
DMA device is not important.

Tested by joining/mirroring displays of udl and radeon under Gnome/X11.

v8:
* release dmadev if device initialization fails (Noralf)
* fix commit description (Noralf)
v7:
* fix use-before-init bug in gm12u320 (Dan)
v6:
* implement workaround in DRM drivers and hold reference to
DMA device while USB device is in use
* remove dev_is_usb() (Greg)
* collapse USB helper into usb_intf_get_dma_device() (Alan)
* integrate Daniel's TODO statement (Daniel)
* fix typos (Greg)
v5:
* provide a helper for USB interfaces (Alan)
* add FIXME item to documentation and TODO list (Daniel)
v4:
* implement workaround with USB helper functions (Greg)
* use struct usb_device->bus->sysdev as DMA device (Takashi)
v3:
* drop gem_create_object
* use DMA mask of USB controller, if any (Daniel, Christian, Noralf)
v2:
* move fix to importer side (Christian, Daniel)
* update SHMEM and CMA helpers for new PRIME callbacks

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices")
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

drm/gm12u320: Don't use drm_device->dev_private

Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Revi

drm/gm12u320: Don't use drm_device->dev_private

Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-23-daniel.vetter@ffwll.ch

show more ...

drm/gm12u320: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-of

drm/gm12u320: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-22-daniel.vetter@ffwll.ch

show more ...

drm/gm12u320: Simplify upload work

Instead of having a work item that never stops (which really should be
a kthread), with a dedicated workqueue to not upset anyone else, use a
delayed work. A bunch

drm/gm12u320: Simplify upload work

Instead of having a work item that never stops (which really should be
a kthread), with a dedicated workqueue to not upset anyone else, use a
delayed work. A bunch of changes:

- We can throw out all the custom wakeup and requeue logic and state
tracking. If we schedule the work with a 0 delay it'll get
scheduled immediately.

- Persistent state (frame & draw_status_timeout) need to be moved out
of the work.

- diff is bigger than the changes, biggest chunk is reindenting the
work fn because it lost its while loop.

Lots of code deleting as consequence all over. Specifically we can
delete the drm_driver.release code now!

v2: Review from Hans:
- Use mod_delayed_work in the plane update path to make sure we do
actually schedule immediately). In the worker we still want
queue_delayed_work, which won't modify the timeout when the work is
already scheduled. Which is exactly what we want if the work races
with a plane update.
- Switch to system_long_wq, Hans says on usb2 a plane upload can take
80 ms.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-46-daniel.vetter@ffwll.ch

show more ...

drm/gm12u320: Use helpers for shutdown/suspend/resume

Also there's a race in the disconnect implemenation. First shut
down, then unplug, leaves a window where userspace could sneak
in and restart th

drm/gm12u320: Use helpers for shutdown/suspend/resume

Also there's a race in the disconnect implemenation. First shut
down, then unplug, leaves a window where userspace could sneak
in and restart the entire machinery.

With this we can also delete the very un-atomic global pipe_enabled
tracking.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-45-daniel.vetter@ffwll.ch

show more ...

drm/gm12u320: Use devm_drm_dev_init

Only drops the drm_dev_put, but hey a few lines!

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans

drm/gm12u320: Use devm_drm_dev_init

Only drops the drm_dev_put, but hey a few lines!

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-44-daniel.vetter@ffwll.ch

show more ...

drm/gm12u320: More drmm_

The drm_mode_config_cleanup call we can drop, and all the allocations
we can switch over to drmm_kzalloc. Unfortunately the work queue is
still present, so can't get rid of

drm/gm12u320: More drmm_

The drm_mode_config_cleanup call we can drop, and all the allocations
we can switch over to drmm_kzalloc. Unfortunately the work queue is
still present, so can't get rid of the drm_driver->release function
outright.

v2: Use drmm_mode_config_init() for more clarity (Sam, Thomas)

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-43-daniel.vetter@ffwll.ch

show more ...

drm: Garbage collect drm_dev_fini

It has become empty. Given the few users I figured not much point
splitting this up.

v2: Rebase over i915 changes.

v3: Rebase over patch split fix.

Acked-by: Sam

drm: Garbage collect drm_dev_fini

It has become empty. Given the few users I figured not much point
splitting this up.

v2: Rebase over i915 changes.

v3: Rebase over patch split fix.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-26-daniel.vetter@ffwll.ch

show more ...

drm/gm12u320: Use drmm_add_final_kfree

With this we can drop the final kfree from the release function.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Si

drm/gm12u320: Use drmm_add_final_kfree

With this we can drop the final kfree from the release function.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-18-daniel.vetter@ffwll.ch

show more ...

drm/gm12u320: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separ

drm/gm12u320: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-7-tzimmermann@suse.de

show more ...

drm/shmem: drop DEFINE_DRM_GEM_SHMEM_FOPS

DEFINE_DRM_GEM_SHMEM_FOPS is identical
to DEFINE_DRM_GEM_FOPS now, drop it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Rob Herring <robh@ke

drm/shmem: drop DEFINE_DRM_GEM_SHMEM_FOPS

DEFINE_DRM_GEM_SHMEM_FOPS is identical
to DEFINE_DRM_GEM_FOPS now, drop it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-6-kraxel@redhat.com

show more ...

drm: gm12u320: Add -ENODEV to list of errors to ignore

Add -ENODEV to the list of usb-transfer errors which we ignore to
avoid logging Frame update errors when the device gets unplugged.

Acked-by:

drm: gm12u320: Add -ENODEV to list of errors to ignore

Add -ENODEV to the list of usb-transfer errors which we ignore to
avoid logging Frame update errors when the device gets unplugged.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811143725.5951-2-hdegoede@redhat.com

show more ...