drm/tilcdc: Fix irq free on unload

[ Upstream commit 38360bf96d816e175bc602c4ee76953cd303b71d ]

The driver only frees the reserved irq if priv->irq_enabled is set to
true. However, the driver mista

drm/tilcdc: Fix irq free on unload

[ Upstream commit 38360bf96d816e175bc602c4ee76953cd303b71d ]

The driver only frees the reserved irq if priv->irq_enabled is set to
true. However, the driver mistakenly sets priv->irq_enabled to false,
instead of true, in tilcdc_irq_install(), and thus the driver never
frees the irq, causing issues on loading the driver a second time.

Fixes: b6366814fa77 ("drm/tilcdc: Convert to Linux IRQ interfaces")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919-lcdc-v1-1-ba60da7421e1@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm: Call drm_atomic_helper_shutdown() at shutdown/remove time for misc drivers

[ Upstream commit 3c4babae3c4a1ae05f8f3f5f3d50c440ead7ca6a ]

Based on grepping through the source code these drivers

drm: Call drm_atomic_helper_shutdown() at shutdown/remove time for misc drivers

[ Upstream commit 3c4babae3c4a1ae05f8f3f5f3d50c440ead7ca6a ]

Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver remove (or unbind) time. Among other things, this means
that if a panel is in use that it won't be cleanly powered off at
system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.

A few notes about these fixes:
- I confirmed that these drivers were all DRIVER_MODESET type drivers,
which I believe makes this relevant.
- I confirmed that these drivers were all DRIVER_ATOMIC.
- When adding drm_atomic_helper_shutdown() to the remove/unbind path,
I added it after drm_kms_helper_poll_fini() when the driver had
it. This seemed to be what other drivers did. If
drm_kms_helper_poll_fini() wasn't there I added it straight after
drm_dev_unregister().
- This patch deals with drivers using the component model in similar
ways as the patch ("drm: Call drm_atomic_helper_shutdown() at
shutdown time for misc drivers")
- These fixes rely on the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop") to simplify
shutdown.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # tilcdc
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.5.I771eb4bd03d8772b19e7dcfaef3e2c167bce5846@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/tilcdc: Use GEM DMA fbdev emulation

Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.

Signed-off-by: Thomas Zimmermann <tzi

drm/tilcdc: Use GEM DMA fbdev emulation

Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-19-tzimmermann@suse.de

show more ...

drm: tilcdc: Remove #ifdef guards for PM related functions

Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle
the .suspend/.resume callbacks.

These macros allow the suspend and

drm: tilcdc: Remove #ifdef guards for PM related functions

Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle
the .suspend/.resume callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jyri Sarha <jyri.sarhaı@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-8-paul@crapouillou.net

show more ...

drm/fb-helper: Move generic fbdev emulation into separate source file

Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the

drm/fb-helper: Move generic fbdev emulation into separate source file

Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de

show more ...

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be mor

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

show more ...

drm/tilcdc: Add support for the nomodeset kernel parameter

According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.

DRM driver

drm/tilcdc: Add support for the nomodeset kernel parameter

According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.

DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.

But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-37-javierm@redhat.com

show more ...

drm/tilcdc: add const to of_device_id

struct of_device_id should normally be const.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri

drm/tilcdc: add const to of_device_id

struct of_device_id should normally be const.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216095536.58577-1-wangxiang@cdjrlc.com

show more ...

drm: Remove redundant 'flush_workqueue()' calls

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueu

drm: Remove redundant 'flush_workqueue()' calls

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

drm/tilcdc: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from usi

drm/tilcdc: Convert to Linux IRQ interfaces

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

For most drivers, only the DRM IRQ helpers use irq_enabled from
struct drm_device. Tilcdc also uses irq_enabled to make its error
rollback work correctly. As the field will become legacy, duplicated
the state in the driver's local private structure.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de

show more ...

drm/<drivers>: Constify struct drm_driver

Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- n

drm/<drivers>: Constify struct drm_driver

Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.

Note that for armada I also went ahead and made the ioctl array const.

Only cc'ing the driver people who've not been converted (everyone else
is way too much).

v2: Fix one misplaced const static, should be static const (0day)

v3:
- Improve commit message (Sam)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch

show more ...

drm/tilcdc: avoid 'make W=2' build failure

The -Wmissing-field-initializer warning when building with W=2
turns into an error because tilcdc is built with -Werror:

drm/tilcdc/tilcdc_drv.c:431:33: e

drm/tilcdc: avoid 'make W=2' build failure

The -Wmissing-field-initializer warning when building with W=2
turns into an error because tilcdc is built with -Werror:

drm/tilcdc/tilcdc_drv.c:431:33: error: missing field 'data' initializer [-Werror,-Wmissing-field-initializers] { "regs", tilcdc_regs_show, 0 },
drm/tilcdc/tilcdc_drv.c:432:33: error: missing field 'data' initializer [-Werror,-Wmissing-field-initializers] { "mm", tilcdc_mm_show, 0 },

Add the missing field initializers to address the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201026194110.3817470-1-arnd@kernel.org

show more ...

drm/tilcdc: Remove tilcdc_crtc_max_width(), use private data

We already have a private data member for maximum display width so
let's use it and get rid of the redundant tilcdc_crtc_max_width().

Th

drm/tilcdc: Remove tilcdc_crtc_max_width(), use private data

We already have a private data member for maximum display width so
let's use it and get rid of the redundant tilcdc_crtc_max_width().

The LCDC version probing is moved to before reading the device tree
properties so that the version information is available when private
data maximum width is initialized, if "max-width" property is not
found.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73683d2ce151cffb811a756595b02892eeac3d84.1602349100.git.jsarha@ti.com

show more ...

drm/tilcdc: Use standard drm_atomic_helper_commit

Gives us proper nonblocking support for free, and a pile of other
things. The tilcdc code is simply old enough that it was never
converted over, but

drm/tilcdc: Use standard drm_atomic_helper_commit

Gives us proper nonblocking support for free, and a pile of other
things. The tilcdc code is simply old enough that it was never
converted over, but was stuck forever with the copypasta from when it
was initially merged.

The riskiest thing with this conversion is maybe that there's an issue
with the vblank handling or vblank event handling, which will upset
the modern commit support in atomic helpers. But from a cursory review
drm_crtc_vblank_on/off is called in the right places, and the event
handling also seems to exist (albeit with much hand-rolling and
probably some races, could perhaps be converted over to
drm_crtc_arm_vblank_event without any real loss).

Motivated by me not having to hand-roll the dma-fence annotations for
this.

v2: Clear out crtc_state->event when we're handling the event, to
avoid upsetting the helpers (reported by Jyri).

v3: Also send out even whent the crtc is getting disabled. Tilcdc looks a
bit like conversion to simple display helpers would work out really
nice.

Tested-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708142050.530240-1-daniel.vetter@ffwll.ch

show more ...

drm/tilcdc: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPS

DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver
to their defaults. No functional changes are made.

Signed-off-by: Thomas

drm/tilcdc: Set GEM CMA functions with DRM_GEM_CMA_DRIVER_OPS

DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver
to their defaults. No functional changes are made.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-39-tzimmermann@suse.de

show more ...

drm/tilcdc: Use GEM CMA object functions

Create GEM objects with drm_gem_cma_create_object_default_funcs(), which
allocates the object and sets CMA's default object functions. Corresponding
callback

drm/tilcdc: Use GEM CMA object functions

Create GEM objects with drm_gem_cma_create_object_default_funcs(), which
allocates the object and sets CMA's default object functions. Corresponding
callbacks in struct drm_driver are cleared. No functional changes are made.

Driver and object-function instances use the same callback functions, with
the exception of vunmap. The implementation of vunmap is empty and left out
in CMA's default object functions.

v3:
* convert to DRIVER_OPS macro in a separate patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-38-tzimmermann@suse.de

show more ...

drm/tilcdc: Set up fbdev after fully registering device

Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.

Signed-off-by: Thomas Zimmermann <tzimmermann@su

drm/tilcdc: Set up fbdev after fully registering device

Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-8-tzimmermann@suse.de

show more ...

drm: convert .debugfs_init() hook to return void.

As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core a

drm: convert .debugfs_init() hook to return void.

As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.

This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.

v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.

References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com

show more ...

drm/tilcdc: remove check for return value of debugfs functions.

Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails. Therefore, remo

drm/tilcdc: remove check for return value of debugfs functions.

Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails. Therefore, remove the check and error handling of the return
value of drm_debugfs_create_files() as it is not needed in
tilcdc_debugfs_init().

Also remove local variables that are not used after the changes.

v2: remove conversion of tilcdc_debugfs_init() to void to avoid build
breakage and enable individual compilation.

References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-3-wambui.karugax@gmail.com

show more ...

remove ioremap_nocache and devm_ioremap_nocache

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Chr

remove ioremap_nocache and devm_ioremap_nocache

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>

show more ...

drm/tilcdc: Remove obsolete bundled tilcdc tfp410 driver

Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410"
devicetree binding. No platform has ever used this driver in the
mainline k

drm/tilcdc: Remove obsolete bundled tilcdc tfp410 driver

Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410"
devicetree binding. No platform has ever used this driver in the
mainline kernel and if anybody connects tfp410 to tilcdc he or she
should use the generic drm tfp410 bridge driver.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e2db6c328467cc51e8d633ecb0ffa7c5736f2e8.1575901747.git.jsarha@ti.com

show more ...

drm/tilcdc: Drop drm_gem_fb_create wrapper

Doesn't do anything.

Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi V

drm/tilcdc: Drop drm_gem_fb_create wrapper

Doesn't do anything.

Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-6-daniel.vetter@ffwll.ch

show more ...

drm/tilcdc: Remove obsolete crtc_mode_valid() hack

Earlier there were no mode_valid() helper for crtc and tilcdc had a
hack to over come this limitation. But now the mode_valid() helper is
there (ha

drm/tilcdc: Remove obsolete crtc_mode_valid() hack

Earlier there were no mode_valid() helper for crtc and tilcdc had a
hack to over come this limitation. But now the mode_valid() helper is
there (has been since v4.13), so it is about time to get rid of that
hack.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <5c4dcb5b1e7975bd2b7ca86f7addf219cd0f9a06.1564750248.git.jsarha@ti.com

show more ...

drm/tilcdc: drop use of drmP.h

Dropped drmP.h and all other header files not used by tilcdc_drv.h.
Added the minimal includes and forwards to make the header file
self-contained.

Then dropped the r

drm/tilcdc: drop use of drmP.h

Dropped drmP.h and all other header files not used by tilcdc_drv.h.
Added the minimal includes and forwards to make the header file
self-contained.

Then dropped the remaining uses of drmP.h and fixed all fall-out.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-15-sam@ravnborg.org

show more ...

drm/tilcdc: Drop drm_gem_prime_export/import

They're the default.

Aside: Would be really nice to switch the others over to
drm_gem_object_funcs.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed

drm/tilcdc: Drop drm_gem_prime_export/import

They're the default.

Aside: Would be really nice to switch the others over to
drm_gem_object_funcs.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-32-daniel.vetter@ffwll.ch

show more ...