treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

drm/sun4i: Pass modifier to backend and frontend format support helpers

To prepare the introduction of tiled mode support, pass the framebuffer
format modifier to the helpers dealing with format sup

drm/sun4i: Pass modifier to backend and frontend format support helpers

To prepare the introduction of tiled mode support, pass the framebuffer
format modifier to the helpers dealing with format support.

Since only linear mode is supported for now, add corresponding checks in
each helper.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-33-paul.kocialkowski@bootlin.com

show more ...

drm/sun4i: backend: Add a helper and a list for supported formats

In order to check whether the backend supports a specific format, an
explicit list and a related helper are introduced.

The prototy

drm/sun4i: backend: Add a helper and a list for supported formats

In order to check whether the backend supports a specific format, an
explicit list and a related helper are introduced.

The prototype of this helper is added to the header so that it can be
called from sun4i_layer later (when introducing tiled mode support).

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-5-paul.kocialkowski@bootlin.com

show more ...

drm/sun4i: Cleanup video/YUV source before enabling a layer

This adds a dedicated function for cleaning the video and YUV source
channel layer enable bits. This function is called first on layer ato

drm/sun4i: Cleanup video/YUV source before enabling a layer

This adds a dedicated function for cleaning the video and YUV source
channel layer enable bits. This function is called first on layer atomic
update to make sure that there are no leftover bits from previous
plane configuration that were not cleaned until now.

It fixes issues when alternating between video and YUV planes, where
both bits would be set eventually, leading to broken plane display.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-2-paul.kocialkowski@bootlin.com

show more ...

drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support

Not all sunxi platforms with the first version of the Display Engine
support an alpha component on the plane with the lowest z posi

drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support

Not all sunxi platforms with the first version of the Display Engine
support an alpha component on the plane with the lowest z position
(as in: lowest z-pos), that gets blended with the background color.

In particular, the A13 is known to have this limitation. However, it was
recently discovered that the A20 and A33 are capable of having alpha on
their lowest plane.

Thus, this introduces a specific quirk to indicate such support,
per-platform. Since this was not tested on sun4i and sun6i platforms, a
conservative approach is kept and this feature is not supported.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719080838.31598-2-paul.kocialkowski@bootlin.com

show more ...

drm/sun4i: sun4i: Register quirks with the backend structure

In prevision for introducing a new quirk that will be used at atomic
plane check time, register the quirks structure with the backend
str

drm/sun4i: sun4i: Register quirks with the backend structure

In prevision for introducing a new quirk that will be used at atomic
plane check time, register the quirks structure with the backend
structure. This way, it can easily be grabbed where needed.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719080838.31598-1-paul.kocialkowski@bootlin.com

show more ...

drm/sun4i: Add support for plane alpha

Our backend supports a per-plane alpha property. Support it through our new
helper.

Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by:

drm/sun4i: Add support for plane alpha

Our backend supports a per-plane alpha property. Support it through our new
helper.

Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/13e89f0d2f2b55752a22eb8c4f37f325246a3a9c.1523432341.git-series.maxime.ripard@bootlin.com

show more ...

drm/sun4i: backend: Support YUV planes

Now that we have the guarantee that we will have only a single YUV plane,
actually support them. The way it works is not really straightforward,
since we first

drm/sun4i: backend: Support YUV planes

Now that we have the guarantee that we will have only a single YUV plane,
actually support them. The way it works is not really straightforward,
since we first need to enable the YUV mode in the plane that we want to
setup, and then we have a few registers to setup the YUV buffer and
parameters.

We also need to setup the color correction to actually have something
displayed.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/66088c1398bd3189123f28a89a7ccc669fe9f296.1519931807.git-series.maxime.ripard@bootlin.com

show more ...

drm/sun4i: backend: Check that we only have a single YUV plane

Just like for the frontend, a single plane can use a YUV format. Make sure
we have that constraint covered in our atomic_check.

This i

drm/sun4i: backend: Check that we only have a single YUV plane

Just like for the frontend, a single plane can use a YUV format. Make sure
we have that constraint covered in our atomic_check.

This is preliminary to the actual YUV support to make sure we don't end up
in an impossible to support situation.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2f8586493d9139b12efe7e94f65e9a149f818e0e.1519931807.git-series.maxime.ripard@bootlin.com

show more ...

drm/sun4i: backend: Check for the number of alpha planes

Due to the way the composition is done in hardware, we can only have a
single alpha-enabled plane active at a time, placed in the second (hig

drm/sun4i: backend: Check for the number of alpha planes

Due to the way the composition is done in hardware, we can only have a
single alpha-enabled plane active at a time, placed in the second (highest
priority) pipe.

Make sure of that in our atomic_check to not end up in an impossible
scenario.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7371f62a1385f2cbe3ed75dfca2e746338eb2286.1516617243.git-series.maxime.ripard@free-electrons.com

show more ...

drm/sun4i: backend: Add support for zpos

Our various planes have a configurable zpos, that combined with the pipes
allow to configure the composition.

Since the interaction between the pipes, zpos

drm/sun4i: backend: Add support for zpos

Our various planes have a configurable zpos, that combined with the pipes
allow to configure the composition.

Since the interaction between the pipes, zpos and alphas framebuffers is
not trivial, let's just enable the zpos as an immutable property for now,
and use that zpos in our atomic_update part.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b006853e908bd06661c5bc1f2191121523bce0e4.1516617243.git-series.maxime.ripard@free-electrons.com

show more ...

drm/sun4i: backend: Fix define typo

There was a typo in the width spelling of the (unused)
SUN4I_BACKEND_IYUVLINEWITDTH_REG macro. Fix it.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxi

drm/sun4i: backend: Fix define typo

There was a typo in the width spelling of the (unused)
SUN4I_BACKEND_IYUVLINEWITDTH_REG macro. Fix it.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b2e872b611b733a98a38902a2197b70c725e0b9.1516617243.git-series.maxime.ripard@free-electrons.com

show more ...

drm/sun4i: backend: Add a custom atomic_check for the frontend

Now that we have everything in place, we can start enabling the frontend.
This is more difficult than one would assume since there can

drm/sun4i: backend: Add a custom atomic_check for the frontend

Now that we have everything in place, we can start enabling the frontend.
This is more difficult than one would assume since there can only be one
plane using the frontend per-backend.

We therefore need to make sure that the userspace will not try to setup
multiple planes using it, since that would be impossible. In order to
prevent that, we can create an atomic_check callback that will check that
only one plane will effectively make use of the frontend in a given
configuration, and will toggle the switch in that plane state so that the
proper setup function can do their role.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/278e6c514a8311750fe627c7f28d58b3e2cbd825.1516613040.git-series.maxime.ripard@free-electrons.com

show more ...

drm/sun4i: backend: Wire in the frontend

Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the fronten

drm/sun4i: backend: Wire in the frontend

Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the frontend on that particular plane or not.

The rest is just plumbing to set up the backend to not perform the DMA but
receive its data from the frontend.

Note that we're still not making any use of the frontend itself, as no one
is setting the flag yet.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdffc25eab2d817820cc78cbd24f1f4b99902014.1516613040.git-series.maxime.ripard@free-electrons.com

show more ...

drm/sun4i: backend: Support output muxing

The backend has a mux to select the destination of the data to output
to. It can select the TCON or the frontends. On the A20, it includes
an option to outp

drm/sun4i: backend: Support output muxing

The backend has a mux to select the destination of the data to output
to. It can select the TCON or the frontends. On the A20, it includes
an option to output to the second TCON. This is not documented in the
user manual, but the vendor kernel uses it nevertheless, so the second
backend outputs to the second TCON.

Although the muxing can be changed on the fly, DRM needs to be able to
group a bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer compositing,
while the TCON generates the display timings. This constraint is not
supported by DRM.

Here we simply pair up backends and TCONs with the same ID.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-2-wens@csie.org

show more ...

drm/sun4i: abstract a engine type

As we are going to add support for the Allwinner DE2 engine in sun4i-drm
driver, we will finally have two types of display engines -- the DE1
backend and the DE2 mi

drm/sun4i: abstract a engine type

As we are going to add support for the Allwinner DE2 engine in sun4i-drm
driver, we will finally have two types of display engines -- the DE1
backend and the DE2 mixer. They both do some display blending and feed
graphics data to TCON, and is part of the "Display Engine" called by
Allwinner, so I choose to call them both "engine" here.

Abstract the engine type to a new struct with an ops struct, which contains
functions that should be called outside the engine-specified code (in
TCON, CRTC or TV Encoder code).

In order to preserve bisectability, we also switch the backend and layer
code in its own module.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

drm/sun4i: backend: Save pointer to device tree node

Save a pointer to the backend's underlying device tree node in its
data structure. This will be used later for downstream tcons to find
and match

drm/sun4i: backend: Save pointer to device tree node

Save a pointer to the backend's underlying device tree node in its
data structure. This will be used later for downstream tcons to find
and match their respective upstream backends.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

drm/sun4i: backend: Fetch backend ID from device tree

Some Allwinner SoCs have 2 display pipelines, as in 2 of each
components, including the frontend, backend, TCON, and any other
extras.

As the b

drm/sun4i: backend: Fetch backend ID from device tree

Some Allwinner SoCs have 2 display pipelines, as in 2 of each
components, including the frontend, backend, TCON, and any other
extras.

As the backend and TCON are always paired together and form the CRTC,
we need to know which backend or TCON we are currently probing, so we
can pair them when initializing the CRTC.

This patch figures out the backend's ID from the device tree and stores
it in the backend's data structure. It does this by looking at the "reg"
property of any remote endpoints connected to the backend's input port.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

drm/sun4i: Use lists to track registered display backends and TCONs

To support multiple display pipelines, we need to keep track of the
multiple display backends and TCONs registered with the driver

drm/sun4i: Use lists to track registered display backends and TCONs

To support multiple display pipelines, we need to keep track of the
multiple display backends and TCONs registered with the driver.

Switch to lists to track registered components. Components are only
appended to their respective lists if the bind process was successful.
The TCON bind function now defers if a backend was not registered.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

drm/sun4i: Fix the high buffer address mask

The highest 3bits of the 4 layers buffers are all part of the same
register. However, our mask computation was wrong, leading to all the
lowest register b

drm/sun4i: Fix the high buffer address mask

The highest 3bits of the 4 layers buffers are all part of the same
register. However, our mask computation was wrong, leading to all the
lowest register bits being removed when we use regmap_update_bits, which
will lead to the buffers being set to some random part of the RAM.

Fix our mask.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

drm/sun4i: backend: Handle the SAT

The A33 has an block called SAT that is part of the backend that needs to
be clocked and out of reset to be able for the backend to operate properly.

Extend the b

drm/sun4i: backend: Handle the SAT

The A33 has an block called SAT that is part of the backend that needs to
be clocked and out of reset to be able for the backend to operate properly.

Extend the binding to have the SAT resources listed, and claim them when
the backend probes.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>

show more ...

drm: Add Allwinner A10 Display Engine support

The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of

drm: Add Allwinner A10 Display Engine support

The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.

Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it u

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

drm/sun4i: Pass modifier to backend and frontend format support helpers

To prepare the introduction of tiled mode support, pass the framebuffer
format modifier to the helpers dealing wit

drm/sun4i: Pass modifier to backend and frontend format support helpers

To prepare the introduction of tiled mode support, pass the framebuffer
format modifier to the helpers dealing with format support.

Since only linear mode is supported for now, add corresponding checks in
each helper.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-33-paul.kocialkowski@bootlin.com

show more ...

drm/sun4i: backend: Add a helper and a list for supported formats

In order to check whether the backend supports a specific format, an
explicit list and a related helper are introduced.

drm/sun4i: backend: Add a helper and a list for supported formats

In order to check whether the backend supports a specific format, an
explicit list and a related helper are introduced.

The prototype of this helper is added to the header so that it can be
called from sun4i_layer later (when introducing tiled mode support).

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-5-paul.kocialkowski@bootlin.com

show more ...