drm/radeon: Only build fbdev if DRM_FBDEV_EMULATION is set

Make building fbdev emulation depend on DRM_FBDEV_EMULATION. Also
rename the source file to radeon_fbdev.c to align with other fbdev
files.

drm/radeon: Only build fbdev if DRM_FBDEV_EMULATION is set

Make building fbdev emulation depend on DRM_FBDEV_EMULATION. Also
rename the source file to radeon_fbdev.c to align with other fbdev
files.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: Drop legacy MST support

Right now, radeon is technically the only non-atomic driver still making
use of the MST helpers - and thus the final user of all of the legacy MST
helpers. Origin

drm/radeon: Drop legacy MST support

Right now, radeon is technically the only non-atomic driver still making
use of the MST helpers - and thus the final user of all of the legacy MST
helpers. Originally I was going to look into seeing if we could move legacy
MST into the radeon driver itself, however:

* SI and CIK both can use amdgpu, which still supports MST
* It currently doesn't work according to my own testing. I'm sure with some
troubleshooting we could likely fix it, but that brings me to point #2:
* It was never actually enabled by default, and is still marked as
experimental in the module parameter description
* If people were using it, someone probably would have probably seen a bug
report about how it is currently not functional by now. That certainly
doesn't appear to be the case, since before getting access to my own
hardware I had to go out of my way to try finding someone to help test
whether this legacy MST code even works - even amongst AMD employees.
* Getting rid of this code and only having atomic versions of the MST
helpers to maintain is likely going to be a lot easier in the long run,
and will make it a lot easier for others contributing to this code to
follow along with what's happening.

FWIW - if anyone still wants this code to be in the tree and has a good
idea of how to support this without needing to maintain the legacy MST
helpers (trying to move them would probably be acceptable), I'm happy to
suggestions. But my hope is that we can just drop this code and forget
about it. I've already run this idea by Harry Wentland and Alex Deucher a
few times as well.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-17-lyude@redhat.com

show more ...

drm/radeon: fix incorrrect SPDX-License-Identifiers

radeon is MIT. This were incorrectly changed in
commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no licen

drm/radeon: fix incorrrect SPDX-License-Identifiers

radeon is MIT. This were incorrectly changed in
commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
and
commit d198b34f3855 (".gitignore: add SPDX License Identifier")
and:
commit ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig")

Fixes: d198b34f3855 (".gitignore: add SPDX License Identifier")
Fixes: ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Fixes: b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2053
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: change cik_default_state table from global to static

Sparse reports these issues
cik_blit_shaders.c:31:11: warning: symbol 'cik_default_state' was not declared. Should it be static?
cik_

drm/radeon: change cik_default_state table from global to static

Sparse reports these issues
cik_blit_shaders.c:31:11: warning: symbol 'cik_default_state' was not declared. Should it be static?
cik_blit_shaders.c:246:11: warning: symbol 'cik_default_size' was not declared. Should it be static?

cik_default_state and cik_default_size are only used in cik.c. Single file symbols
should be static. So move their definitions to cik_blit_shaders.h and change their
storage-class-specifier to static.

Remove unneeded cik_blit_shader.c

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon/kms: change evergreen_default_state table from global to static

evergreen_default_state and evergreen_default_size are only
used in evergreen.c. Single file symbols should be static.
So

drm/radeon/kms: change evergreen_default_state table from global to static

evergreen_default_state and evergreen_default_size are only
used in evergreen.c. Single file symbols should be static.
So move their definitions to evergreen_blit_shaders.h
and change their storage-class-specifier to static.

Remove unneeded evergreen_blit_shader.c

evergreen_ps/vs definitions were removed with
commit 4f8629675800 ("drm/radeon/kms: remove r6xx+ blit copy routines")
So their declarations in evergreen_blit_shader.h
are not needed, so remove them.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: remove r600_blit_shaders.[c|h]

The only use of the global variables in r600_blit_shaders.c
were in the old drivers/gpu/drm/radeon/r600_blit.c
This file was removed in
commit 8333f607a631

drm/radeon: remove r600_blit_shaders.[c|h]

The only use of the global variables in r600_blit_shaders.c
were in the old drivers/gpu/drm/radeon/r600_blit.c
This file was removed in
commit 8333f607a631 ("drm/radeon: remove UMS support")

So remove the r600_blit_shaders.[c|h] files

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: change cayman_default_state table from global to static

cayman_default_state and cayman_default_size are only
used in ni.c. Single file symbols should be static.
So move their definitio

drm/radeon: change cayman_default_state table from global to static

cayman_default_state and cayman_default_size are only
used in ni.c. Single file symbols should be static.
So move their definitions to cayman_blit_shaders.h
and change their storage-class-specifier to static.

Remove unneeded cayman_blit_shader.c

cayman_ps/vs definitions were removed with
commit 4f8629675800 ("drm/radeon/kms: remove r6xx+ blit copy routines")
So their declarations in cayman_blit_shader.h
are not needed, so remove them.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: change si_default_state table from global to static

Smatch reports these issues
si_blit_shaders.c:31:11: warning: symbol 'si_default_state'
was not declared. Should it be static?
si_bl

drm/radeon: change si_default_state table from global to static

Smatch reports these issues
si_blit_shaders.c:31:11: warning: symbol 'si_default_state'
was not declared. Should it be static?
si_blit_shaders.c:253:11: warning: symbol 'si_default_size'
was not declared. Should it be static?

Both symbols are only used in si.c. Single file symbols
should be static. So move the definition of
si_default_state and si_default_size to si_blit_shader.h
and change their storage-class-specifier to static.

Remove unneeded si_blit_shader.c

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: fix incorrrect SPDX-License-Identifiers

[ Upstream commit 1f43b8903f3aae4a26a603c36f6d5dd25d6edb51 ]

radeon is MIT. This were incorrectly changed in
commit b24413180f56 ("License clean

drm/radeon: fix incorrrect SPDX-License-Identifiers

[ Upstream commit 1f43b8903f3aae4a26a603c36f6d5dd25d6edb51 ]

radeon is MIT. This were incorrectly changed in
commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
and
commit d198b34f3855 (".gitignore: add SPDX License Identifier")
and:
commit ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig")

Fixes: d198b34f3855 (".gitignore: add SPDX License Identifier")
Fixes: ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Fixes: b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2053
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/radeon: align short build log

This beautifies the build log.

[Before]

HOSTCC drivers/gpu/drm/radeon/mkregtable
MKREGTABLE drivers/gpu/drm/radeon/r100_reg_safe.h
MKREGTABLE drivers/gpu/d

drm/radeon: align short build log

This beautifies the build log.

[Before]

HOSTCC drivers/gpu/drm/radeon/mkregtable
MKREGTABLE drivers/gpu/drm/radeon/r100_reg_safe.h
MKREGTABLE drivers/gpu/drm/radeon/rn50_reg_safe.h
CC [M] drivers/gpu/drm/radeon/r100.o
MKREGTABLE drivers/gpu/drm/radeon/r300_reg_safe.h
CC [M] drivers/gpu/drm/radeon/r300.o

[After]

HOSTCC drivers/gpu/drm/radeon/mkregtable
MKREG drivers/gpu/drm/radeon/r100_reg_safe.h
MKREG drivers/gpu/drm/radeon/rn50_reg_safe.h
CC [M] drivers/gpu/drm/radeon/r100.o
MKREG drivers/gpu/drm/radeon/r300_reg_safe.h
CC [M] drivers/gpu/drm/radeon/r300.o

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: use pattern rule to avoid code duplication in Makefile

This Makefile repeats similar build rules. Use a pattern rule.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by

drm/radeon: use pattern rule to avoid code duplication in Makefile

This Makefile repeats similar build rules. Use a pattern rule.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: fix build rules of *_reg_safe.h

if_changed must have FORCE as a prerequisite, and the targets must be
added to 'targets'.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-of

drm/radeon: fix build rules of *_reg_safe.h

if_changed must have FORCE as a prerequisite, and the targets must be
added to 'targets'.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: remove unneeded header include path

A header include path without $(srctree)/ is suspicious because it does
not work with O= builds.

You can build drivers/gpu/drm/radeon/ without this i

drm/radeon: remove unneeded header include path

A header include path without $(srctree)/ is suspicious because it does
not work with O= builds.

You can build drivers/gpu/drm/radeon/ without this include path.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

kbuild: rename hostprogs-y/always to hostprogs/always-y

In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.

It is typica

kbuild: rename hostprogs-y/always to hostprogs/always-y

In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.

It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.

This commit renames like follows:

always -> always-y
hostprogs-y -> hostprogs

So, scripts/Makefile will look like this:

always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)

I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.

The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

drm/radeon: deprecate and remove KFD interface

To quote Felix: "For testing KV with current user mode stack, please use
amdgpu. I don't expect this to work with radeon and I'm not planning to
spend

drm/radeon: deprecate and remove KFD interface

To quote Felix: "For testing KV with current user mode stack, please use
amdgpu. I don't expect this to work with radeon and I'm not planning to
spend any effort on making radeon work with a current user mode stack."

Only compile tested, but should be straight forward.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

show more ...

drm/radeon: Use correct path to trace include

The header comment in include/trace/define_trace.h specifies that the
TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header
rather than t

drm/radeon: Use correct path to trace include

The header comment in include/trace/define_trace.h specifies that the
TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header
rather than the trace file including it. Most instances get that wrong
and work around it by adding the $(src) directory to the include path.

While this works, it is preferable to refer to the correct path to the
trace file in the first place and avoid any workaround.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

radeon: take out dead compat ioctls

Compat wrappers in radeon_ioc32.c had been unreachable since
"drm/radeon: remove UMS support" has removed radeon_driver_old_fops.

Signed-off-by: Al Viro <viro@z

radeon: take out dead compat ioctls

Compat wrappers in radeon_ioc32.c had been unreachable since
"drm/radeon: remove UMS support" has removed radeon_driver_old_fops.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

drm/radeon: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

Signed-off-by: Masahiro Yama

drm/radeon: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-14-git-send-email-yamada.masahiro@socionext.com

show more ...

drm/radeon: remove UMS support

It's been deprecated behind a kconfig option for almost
two years and hasn't really been supported for years before
that. DDX support was dropped more than three year

drm/radeon: remove UMS support

It's been deprecated behind a kconfig option for almost
two years and hasn't really been supported for years before
that. DDX support was dropped more than three years ago.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: add DisplayPort MST support (v2)

This adds initial DP 1.2 MST support to radeon, on CAYMAN
and up in theory.

This is off by default.

v2: agd5f:
- add UNIPHY3 offsets
- move atom cmd ta

drm/radeon: add DisplayPort MST support (v2)

This adds initial DP 1.2 MST support to radeon, on CAYMAN
and up in theory.

This is off by default.

v2: agd5f:
- add UNIPHY3 offsets
- move atom cmd table code into atombios_encoders.c
- whitespace cleanup
- replace some magic numbers with proper defines

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: program auxch directly (v2)

The atombios tables have an unfortunate restriction on only
being able to write 12 bytes, MST really wants 16-bytes here,
and since the hw can do it, we shoul

drm/radeon: program auxch directly (v2)

The atombios tables have an unfortunate restriction on only
being able to write 12 bytes, MST really wants 16-bytes here,
and since the hw can do it, we should just write directly to it.

This uses a module option to allow for it now, and maybe
we should provide the old code as a fallback for a while.

v2: (agd5f)
- move registers to a proper register header
- only enable on DCE5+
- enable by default on DCE5+
- Switch pad to aux mode before using it
- reformat instance handling to better match the
rest of the driver

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: make MMU_NOTIFIER optional

In cases where MMU_NOTIFIER is not available, userptr will not be
available. Similar to i915, although not making an exception for
CAP_SYS_ADMIN.

The propose

drm/radeon: make MMU_NOTIFIER optional

In cases where MMU_NOTIFIER is not available, userptr will not be
available. Similar to i915, although not making an exception for
CAP_SYS_ADMIN.

The proposed userspace patches for userptr seem to handle the fall-
back properly, so a userptr-less kernel should not be a problem.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

radeon/audio: consolidate audio_init() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander

radeon/audio: consolidate audio_init() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/radeon: split semaphore and sync object handling v2

Previously we just allocated space for four hardware semaphores
in each software semaphore object. Make software semaphore objects
represent o

drm/radeon: split semaphore and sync object handling v2

Previously we just allocated space for four hardware semaphores
in each software semaphore object. Make software semaphore objects
represent only one hardware semaphore address again by splitting
the sync code into it's own object.

v2: fix typo in comment

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...