drm/nouveau: nvkm/vmm: implement raw ops to manage uvmm

The new VM_BIND UAPI uses the DRM GPU VA manager to manage the VA space.
Hence, we a need a way to manipulate the MMUs page tables without goi

drm/nouveau: nvkm/vmm: implement raw ops to manage uvmm

The new VM_BIND UAPI uses the DRM GPU VA manager to manage the VA space.
Hence, we a need a way to manipulate the MMUs page tables without going
through the internal range allocator implemented by nvkm/vmm.

This patch adds a raw interface for nvkm/vmm to pass the resposibility
for managing the address space and the corresponding map/unmap/sparse
operations to the upper layers.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804182406.5222-11-dakr@redhat.com

show more ...

drm/nouveau: rip out nvkm_client.super

No longer required now that userspace can't touch anything that might
need it, and should fix DRM MM operations racing with each other, and
the random hangs/cr

drm/nouveau: rip out nvkm_client.super

No longer required now that userspace can't touch anything that might
need it, and should fix DRM MM operations racing with each other, and
the random hangs/crashes that come with that.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

show more ...

drm/nouveau/mmu: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/mmu: serialise mmu invalidations with private mutex

nvkm_subdev.mutex is going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau: fix bogus GPL-2 license header

The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily head

drm/nouveau: fix bogus GPL-2 license header

The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.

Fixes: b24413180f5 (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu/gp100-: support vmms with gcc/tex replayable faults enabled

Some GPU units are capable of supporting "replayable" page faults, where
the execution unit will wait for SW to fixup GPU

drm/nouveau/mmu/gp100-: support vmms with gcc/tex replayable faults enabled

Some GPU units are capable of supporting "replayable" page faults, where
the execution unit will wait for SW to fixup GPU page tables rather than
triggering a channel-fatal fault.

This feature isn't useful (it's harmful, even) unless something like HMM
is being used to manage events appearing in the replayable fault buffer,
so, it's disabled by default.

This commit allows a client to request it be enabled.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu: add a privileged method to directly manage PTEs

This provides a somewhat more direct method of manipulating the GPU page
tables, which will be required to support SVM.

Signed-off-b

drm/nouveau/mmu: add a privileged method to directly manage PTEs

This provides a somewhat more direct method of manipulating the GPU page
tables, which will be required to support SVM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu: store mapped flag separately from memory pointer

This will be used to support a privileged client providing PTEs directly,
without a memory object to use as a reference.

Signed-off

drm/nouveau/mmu: store mapped flag separately from memory pointer

This will be used to support a privileged client providing PTEs directly,
without a memory object to use as a reference.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu/tu102: rename implementation from tu104

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu/tu104: initial support

New flush method.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu/gv100: initial support

VEID support hacked in here, as it's the most convenient place for now.

Will be refined once it's better understood.

Signed-off-by: Ben Skeggs <bskeggs@redha

drm/nouveau/mmu/gv100: initial support

VEID support hacked in here, as it's the most convenient place for now.

Will be refined once it's better understood.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling

- Fixes addition of stolen memory base address to PTEs.
- Removes support for compression.

Signed-off-by: Ben Skeggs <bskeggs@redhat

drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling

- Fixes addition of stolen memory base address to PTEs.
- Removes support for compression.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

drm/nouveau/mmu: remove old vmm frontend

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: define user interfaces to mmu memory allocation

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: define user interfaces to mmu

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: build up information on available memory types

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: implement new vmm frontend

These are the new priviledged interfaces to the VMM backends, and expose
some functionality that wasn't previously available.

It's now possible to alloca

drm/nouveau/mmu: implement new vmm frontend

These are the new priviledged interfaces to the VMM backends, and expose
some functionality that wasn't previously available.

It's now possible to allocate a chunk of address-space (even all of it),
without causing page tables to be allocated up-front, and then map into
it at arbitrary locations. This is the basic primitive used to support
features such as sparse mapping, or to allow userspace control over its
own address-space, or HMM (where the GPU driver isn't in control of the
address-space layout).

Rather than being tied to a subtle combination of memory object and VMA
properties, arguments that control map flags (ro, kind, etc) are passed
explicitly at map time.

The compatibility hacks to implement the old frontend on top of the new
driver backends have been replaced with something similar to implement
the old frontend's interfaces on top of the new frontend.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu: remove support for old backends

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: implement new vmm backend

This is the common code to support a rework of the VMM backends.

It adds support for more than 2 levels of page table nesting, which
is required to be abl

drm/nouveau/mmu: implement new vmm backend

This is the common code to support a rework of the VMM backends.

It adds support for more than 2 levels of page table nesting, which
is required to be able to support GP100's MMU layout.

Sparse mappings (that don't cause MMU faults when accessed) are now
supported, where the backend provides it.

Dual-PT handling had to become more sophisticated to support sparse,
but this also allows us to support an optimisation the MMU provides
on GK104 and newer.

Certain operations can now be combined into a single page tree walk
to avoid some overhead, but also enables optimsations like skipping
PTE unmap writes when the PT will be destroyed anyway.

The old backend has been hacked up to forward requests onto the new
backend, if present, so that it's possible to bisect between issues
in the backend changes vs the upcoming frontend changes.

Until the new frontend has been merged, new backends will leak BAR2
page tables on module unload. This is expected, and it's not worth
the effort of hacking around this as it doesn't effect runtime.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu: handle instance block setup

We previously required each VMM user to allocate their own page directory
and fill in the instance block themselves.

It makes more sense to handle this

drm/nouveau/mmu: handle instance block setup

We previously required each VMM user to allocate their own page directory
and fill in the instance block themselves.

It makes more sense to handle this in a common location.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu/nv50,g84: implement vmm on top of new base

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu/nv44: implement vmm on top of new base

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu: implement base for new vm management

This is the first chunk of the new VMM code that provides the structures
needed to describe a GPU virtual address-space layout, as well as commo

drm/nouveau/mmu: implement base for new vm management

This is the first chunk of the new VMM code that provides the structures
needed to describe a GPU virtual address-space layout, as well as common
interfaces to handle VMM creation, and connecting instances to a VMM.

The constructor now allocates the PD itself, rather than having the user
handle that manually. This won't/can't be used until after all backends
have been ported to these interfaces, so a little bit of memory will be
wasted on Fermi and newer for a couple of commits in the series.

Compatibility has been hacked into the old code to allow each GPU backend
to be ported individually.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...

drm/nouveau/mmu: implement page table sub-allocation

GP100 "big" (which is a funny name, when it supports "even bigger") page
tables are small enough that we want to be able to suballocate them from

drm/nouveau/mmu: implement page table sub-allocation

GP100 "big" (which is a funny name, when it supports "even bigger") page
tables are small enough that we want to be able to suballocate them from
a larger block of memory.

This builds on the previous page table cache interfaces so that the VMM
code doesn't need to know the difference.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

show more ...