drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()

When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, derefe

drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()

When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead.

Fixes: cb285a5348e7 ("drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230612092359.784115-1-victor.liu@nxp.com

show more ...

drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}

The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the

drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}

The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.

Hence, rename the field to dma_addr, which is more applicable.

In order to do this renaming the following coccinelle script was used:

```
@@
struct drm_gem_dma_object *gem;
@@

- gem->paddr
+ gem->dma_addr

@@
struct drm_gem_dma_object gem;
@@

- gem.paddr
+ gem.dma_addr

@exists@
typedef dma_addr_t;
symbol paddr;
@@

dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>

@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;

```

This patch is compile-time tested with:

```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com

show more ...

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be mor

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

show more ...

drm/fb: rename FB CMA helpers to FB DMA helpers

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more appli

drm/fb: rename FB CMA helpers to FB DMA helpers

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com

show more ...

drm/atomic-helper: Remove _HELPER_ infix from DRM_PLANE_HELPER_NO_SCALING

Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant
is not really a helper, but rather a characteristic

drm/atomic-helper: Remove _HELPER_ infix from DRM_PLANE_HELPER_NO_SCALING

Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant
is not really a helper, but rather a characteristic of the plane itself.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-4-tzimmermann@suse.de

show more ...

drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers

The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces
in drm_atomic_helper.h, but defined in drm_plane_helper

drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers

The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces
in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of
DRM includes the latter header file for using this macro. Move the macro
and remove the include statements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de

show more ...

drm: Remove linux/media-bus-format.h from drm_crtc.h

drm_crtc.h has no need for linux/media-bus-format.h, so don't
include it. Avoids useless rebuilds of the entire universe when
touching linux/medi

drm: Remove linux/media-bus-format.h from drm_crtc.h

drm_crtc.h has no need for linux/media-bus-format.h, so don't
include it. Avoids useless rebuilds of the entire universe when
touching linux/media-bus-format.h.

Quite a few placs do currently depend on linux/media-bus-format.h
without actually including it directly. All of those need to be
fixed up.

v2: Deal with ingenic as well
v3: Fix up mxsfb and remaining parts of imx

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com

show more ...

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a

drm: Drop drm_framebuffer.h from drm_crtc.h

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm: mxsfb: Implement LCDIF scanout CRC32 support

The LCDIF controller as present in i.MX28/i.MX6SX/i.MX8M Mini/Nano has
CRC_STAT register, which contains CRC32 of the frame as it was clocked
out of

drm: mxsfb: Implement LCDIF scanout CRC32 support

The LCDIF controller as present in i.MX28/i.MX6SX/i.MX8M Mini/Nano has
CRC_STAT register, which contains CRC32 of the frame as it was clocked
out of the DPI interface of the LCDIF. This is most likely meant as a
functional safety feature.

Unfortunately, there is zero documentation on how the CRC32 is calculated,
there is no documentation of the polynomial, the init value, nor on which
data is the checksum applied.

By applying brute-force on 8 pixel / 2 line frame, which is the minimum
size LCDIF would work with, it turns out the polynomial is CRC32_POLY_LE
0xedb88320 , init value is 0xffffffff , the input data are bitrev32()
of the entire frame and the resulting CRC has to be also bitrev32()ed.

Doing this calculation in kernel for each frame is unrealistic due to the
CPU demand, so attach the CRC collected from hardware to a frame instead.
The DRM subsystem already has an interface for this purpose and the CRC
can be accessed e.g. via debugfs:
"
$ echo auto > /sys/kernel/debug/dri/1/crtc-0/crc/control
$ cat /sys/kernel/debug/dri/1/crtc-0/crc/data
0x0000408c 0xa4e5cdd8
0x0000408d 0x72f537b4
"
The per-frame CRC can be used by userspace e.g. during automated testing,
to verify that whatever buffer was sent to be scanned out was actually
scanned out of the LCDIF correctly.

Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429212313.305556-1-marex@denx.de

show more ...

drm: mxsfb: Obtain bus flags from bridge state

In case the MXSFB is connected to a bridge, attempt to obtain bus flags
from that bridge state too. The bus flags may specify e.g. the DE signal
polari

drm: mxsfb: Obtain bus flags from bridge state

In case the MXSFB is connected to a bridge, attempt to obtain bus flags
from that bridge state too. The bus flags may specify e.g. the DE signal
polarity.

Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220417021011.337066-1-marex@denx.de

show more ...

drm: mxsfb: Reorder mxsfb_crtc_mode_set_nofb()

Reorder mxsfb_crtc_mode_set_nofb() such that all functions which perform
register IO are called from one single location in this function. This is
a cl

drm: mxsfb: Reorder mxsfb_crtc_mode_set_nofb()

Reorder mxsfb_crtc_mode_set_nofb() such that all functions which perform
register IO are called from one single location in this function. This is
a clean up. No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-4-marex@denx.de

show more ...

drm: mxsfb: Factor out mxsfb_set_mode()

Pull mode registers programming from mxsfb_enable_controller() into
dedicated function mxsfb_set_mode(). This is a clean up. No functional
change.

Signed-off

drm: mxsfb: Factor out mxsfb_set_mode()

Pull mode registers programming from mxsfb_enable_controller() into
dedicated function mxsfb_set_mode(). This is a clean up. No functional
change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-3-marex@denx.de

show more ...

drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()

Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr() to correctly handle
FB offset.

Signed-off-by: Marek Vasut <marex@

drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()

Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr() to correctly handle
FB offset.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-2-marex@denx.de

show more ...

drm: mxsfb: Wrap FIFO reset and comments into mxsfb_reset_block()

Wrap FIFO reset and comments into mxsfb_reset_block(), this is a clean up.
No functional change.

Reviewed-by: Lucas Stach <l.stach@

drm: mxsfb: Wrap FIFO reset and comments into mxsfb_reset_block()

Wrap FIFO reset and comments into mxsfb_reset_block(), this is a clean up.
No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-1-marex@denx.de

show more ...

drm: mxsfb: Fix NULL pointer dereference

mxsfb should not ever dereference the NULL pointer which
drm_atomic_get_new_bridge_state is allowed to return.
Assume a fixed format instead.

Fixes: b776b0f

drm: mxsfb: Fix NULL pointer dereference

mxsfb should not ever dereference the NULL pointer which
drm_atomic_get_new_bridge_state is allowed to return.
Assume a fixed format instead.

Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202081755.145716-3-alexander.stein@ew.tq-group.com

show more ...

drm: mxsfb: Set fallback bus format when the bridge doesn't provide one

If a bridge doesn't do any bus format handling MEDIA_BUS_FMT_FIXED is
returned. Fallback to a reasonable default (MEDIA_BUS_FM

drm: mxsfb: Set fallback bus format when the bridge doesn't provide one

If a bridge doesn't do any bus format handling MEDIA_BUS_FMT_FIXED is
returned. Fallback to a reasonable default (MEDIA_BUS_FMT_RGB888_1X24) in
that case.

This unbreaks e.g. using mxsfb with the nwl bridge and mipi dsi panels.

Reported-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/781f0352052cc50c823c199ef5f53c84902d0580.1633959458.git.agx@sigxcpu.org

show more ...

drm: mxsfb: Print failed bus format in hex

media-bus-formats.h has them in hexadecimal as well so matching with
that file saves one conversion when debugging.

Signed-off-by: Guido Günther <agx@sigx

drm: mxsfb: Print failed bus format in hex

media-bus-formats.h has them in hexadecimal as well so matching with
that file saves one conversion when debugging.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c84b34855abbb85cd25bbb5126db302f88327640.1633959458.git.agx@sigxcpu.org

show more ...

drm: mxsfb: Fix NULL pointer dereference

[ Upstream commit 622c9a3a7868e1eeca39c55305ca3ebec4742b64 ]

mxsfb should not ever dereference the NULL pointer which
drm_atomic_get_new_bridge_state is all

drm: mxsfb: Fix NULL pointer dereference

[ Upstream commit 622c9a3a7868e1eeca39c55305ca3ebec4742b64 ]

mxsfb should not ever dereference the NULL pointer which
drm_atomic_get_new_bridge_state is allowed to return.
Assume a fixed format instead.

Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202081755.145716-3-alexander.stein@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm: mxsfb: Set fallback bus format when the bridge doesn't provide one

[ Upstream commit 1db060509903b29d63fe2e39c14fd0f99c4a447e ]

If a bridge doesn't do any bus format handling MEDIA_BUS_FMT_FIX

drm: mxsfb: Set fallback bus format when the bridge doesn't provide one

[ Upstream commit 1db060509903b29d63fe2e39c14fd0f99c4a447e ]

If a bridge doesn't do any bus format handling MEDIA_BUS_FMT_FIXED is
returned. Fallback to a reasonable default (MEDIA_BUS_FMT_RGB888_1X24) in
that case.

This unbreaks e.g. using mxsfb with the nwl bridge and mipi dsi panels.

Reported-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/781f0352052cc50c823c199ef5f53c84902d0580.1633959458.git.agx@sigxcpu.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm: mxsfb: Clear FIFO_CLEAR bit

Make sure the FIFO_CLEAR bit is latched in when configuring the
controller, so that the FIFO is really cleared. And then clear
the FIFO_CLEAR bit, since it is not se

drm: mxsfb: Clear FIFO_CLEAR bit

Make sure the FIFO_CLEAR bit is latched in when configuring the
controller, so that the FIFO is really cleared. And then clear
the FIFO_CLEAR bit, since it is not self-clearing.

Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # i.Core MX8MM
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224946.189524-1-marex@denx.de

show more ...

drm: mxsfb: Use bus_format from the nearest bridge if present

In case there is a bridge connected to the LCDIF, use bus_format
from the bridge, otherwise behave as before and use bus_format
from the

drm: mxsfb: Use bus_format from the nearest bridge if present

In case there is a bridge connected to the LCDIF, use bus_format
from the bridge, otherwise behave as before and use bus_format
from the connector. This way, even if there are multiple bridges
in the display pipeline, the LCDIF will use the correct format.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726194457.341696-1-marex@denx.de

show more ...

drm: mxsfb: Increase number of outstanding requests on V4 and newer HW

In case the DRAM is under high load, the MXSFB FIFO might underflow
and that causes visible artifacts. This could be triggered

drm: mxsfb: Increase number of outstanding requests on V4 and newer HW

In case the DRAM is under high load, the MXSFB FIFO might underflow
and that causes visible artifacts. This could be triggered on i.MX8MM
using e.g. "$ memtester 128M" on a device with 1920x1080 panel. The
first "Stuck Address" test of the memtester will completely corrupt
the image on the panel and leave the MXSFB FIFO in odd state.

To avoid this underflow, increase number of outstanding requests to
DRAM from 2 to 16, which is the maximum. This mitigates the issue
and it can no longer be triggered.

Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224759.189351-1-marex@denx.de

show more ...

drm: mxsfb: Enable recovery on underflow

There is some sort of corner case behavior of the controller,
which could rarely be triggered at least on i.MX6SX connected
to 800x480 DPI panel and i.MX8MM

drm: mxsfb: Enable recovery on underflow

There is some sort of corner case behavior of the controller,
which could rarely be triggered at least on i.MX6SX connected
to 800x480 DPI panel and i.MX8MM connected to DPI->DSI->LVDS
bridged 1920x1080 panel (and likely on other setups too), where
the image on the panel shifts to the right and wraps around.
This happens either when the controller is enabled on boot or
even later during run time. The condition does not correct
itself automatically, i.e. the display image remains shifted.

It seems this problem is known and is due to sporadic underflows
of the LCDIF FIFO. While the LCDIF IP does have underflow/overflow
IRQs, neither of the IRQs trigger and neither IRQ status bit is
asserted when this condition occurs.

All known revisions of the LCDIF IP have CTRL1 RECOVER_ON_UNDERFLOW
bit, which is described in the reference manual since i.MX23 as
"
Set this bit to enable the LCDIF block to recover in the next
field/frame if there was an underflow in the current field/frame.
"
Enable this bit to mitigate the sporadic underflows.

Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224701.189289-1-marex@denx.de

show more ...

drm/<driver>: drm_gem_plane_helper_prepare_fb is now the default

No need to set it explicitly.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by:

drm/<driver>: drm_gem_plane_helper_prepare_fb is now the default

No need to set it explicitly.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jyri Sarha <jyri.sarha@iki.fi>
Cc: Tomi Valkeinen <tomba@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-sunxi@lists.linux.dev
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch

show more ...

drm: Use state helper instead of the plane state pointer

Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which

drm: Use state helper instead of the plane state pointer

Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.

Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.

This was made using the coccinelle script below:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)

@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@

func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}

@ include depends on adds_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && adds_new_state @
@@

+ #include <drm/drm_atomic.h>
#include <drm/...>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech

show more ...