Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53 |
|
#
e8b595f7 |
| 04-Jul-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm/hdmi: make hdmi_phy_8996 OF clk provider
On MSM8996 the HDMI PHY provides the PLL clock to the MMCC. As we are preparing to convert the MSM8996 to use DT clocks properties (rather than globa
drm/msm/hdmi: make hdmi_phy_8996 OF clk provider
On MSM8996 the HDMI PHY provides the PLL clock to the MMCC. As we are preparing to convert the MSM8996 to use DT clocks properties (rather than global clock names), register the OF clock provider.
While we are at it, also change the driver to use clk_parent_data rather parent_names to setup a link to the XO clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/492318/ Link: https://lore.kernel.org/r/20220704161148.814510-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
show more ...
|
Revision tags: v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16 |
|
#
c0e745d7 |
| 05-Jan-2022 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm: drop dbgname argument from msm_ioremap*()
msm_ioremap() functions take additional argument dbgname which is now unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Review
drm/msm: drop dbgname argument from msm_ioremap*()
msm_ioremap() functions take additional argument dbgname which is now unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7 |
|
#
64739f33 |
| 20-Sep-2021 |
Rikard Falkeborn <rikard.falkeborn@gmail.com> |
drm: msm: hdmi: Constify static structs
The only usage of hdmi_8996_pll_ops is to assign its address to the ops field in the clk_init_data struct, and the only usage of pll_init is to assign its add
drm: msm: hdmi: Constify static structs
The only usage of hdmi_8996_pll_ops is to assign its address to the ops field in the clk_init_data struct, and the only usage of pll_init is to assign its address to the init field in the clk_hw struct, both which are pointers to const. Make them const to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210920212014.40520-1-rikard.falkeborn@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
show more ...
|
Revision tags: v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6 |
|
#
feea39a8 |
| 04-Aug-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/msm: drop use of drmP.h
Drop the deprecated drmP.h header file, and trim msm_drv.h to the relevant include files.
This resulted in a suprisingly many edits as many files relied on headers inclu
drm/msm: drop use of drmP.h
Drop the deprecated drmP.h header file, and trim msm_drv.h to the relevant include files.
This resulted in a suprisingly many edits as many files relied on headers included via msm_drv.h. But msm_drv.h is not supposed to carry include files it do not need, so the individual files have to include what extra they needs.
v2: - Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Carsten Behling <carsten.behling@googlemail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Todor Tomov <todor.tomov@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
show more ...
|
Revision tags: v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
97fb5e8d |
| 29-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19 |
|
#
6a41da17 |
| 20-Oct-2018 |
Mamta Shukla <mamtashukla555@gmail.com> |
drm: msm: Use DRM_DEV_* instead of dev_*
Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate drm-formatted specific log messages so that it will be easy to differentiate in case of
drm: msm: Use DRM_DEV_* instead of dev_*
Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate drm-formatted specific log messages so that it will be easy to differentiate in case of multiple instances of driver.
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
Revision tags: v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14 |
|
#
aede1e9e |
| 16-Oct-2017 |
Rob Clark <robdclark@gmail.com> |
drm/msm/hdmi: convert to msm_clk_get()
We already have, as a result of upstreaming the gpu bindings, msm_clk_get() which will try to get the clock both without and with a "_clk" suffix. Use this in
drm/msm/hdmi: convert to msm_clk_get()
We already have, as a result of upstreaming the gpu bindings, msm_clk_get() which will try to get the clock both without and with a "_clk" suffix. Use this in HDMI code so we can drop the "_clk" suffix in bindings while maintaing backwards compatibility.
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org>
show more ...
|
Revision tags: v4.13.5, v4.13, v4.12 |
|
#
aacd9e6b |
| 14-Jun-2017 |
Archit Taneja <architt@codeaurora.org> |
drm/msm/hdmi: Remove mmagic_iface_clk from the 8x96 PHY clocks
This was used as a placeholder. It was never really input to the MDSS/HDMI clocks.
Signed-off-by: Archit Taneja <architt@codeaurora.or
drm/msm/hdmi: Remove mmagic_iface_clk from the 8x96 PHY clocks
This was used as a placeholder. It was never really input to the MDSS/HDMI clocks.
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
#
b474cbbb |
| 16-Jun-2017 |
Archit Taneja <architt@codeaurora.org> |
drm/msm/hdmi: 8996 PLL: Populate unprepare
Without doing anything in unprepare, the HDMI driver isn't able to switch modes successfully. Calling set_rate with a new rate results in an un-locked PLL.
drm/msm/hdmi: 8996 PLL: Populate unprepare
Without doing anything in unprepare, the HDMI driver isn't able to switch modes successfully. Calling set_rate with a new rate results in an un-locked PLL.
If we reset the PLL in unprepare, the PLL is able to lock with the new rate.
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28 |
|
#
73b65b19 |
| 27-Oct-2016 |
Archit Taneja <architt@codeaurora.org> |
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers.
The clock fram
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers.
The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use.
One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand.
We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them.
Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
Revision tags: v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3 |
|
#
fcda50c8 |
| 22-Feb-2016 |
Arnd Bergmann <arnd@arndb.de> |
drm/msm: rename hdmi symbols
Global symbols in the kernel should be prefixed by the name of the subsystem and/or driver to avoid conflicts when all code is built-in.
In this case, function names li
drm/msm: rename hdmi symbols
Global symbols in the kernel should be prefixed by the name of the subsystem and/or driver to avoid conflicts when all code is built-in.
In this case, function names like 'hdmi_register' or 'hdmi_set_mode' are way too generic for an MSM specific DRM driver, so I'm renaming them all to msm_hdmi_* here.
I also rename a lot of the 'static' symbols along with the global names for consistency, even though those are relatively harmless; they might only be slightly confusing when they show up in backtraces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
#
e17afdce |
| 24-Feb-2016 |
Archit Taneja <architt@codeaurora.org> |
drm/msm/hdmi: HDMI 8996 PHY/PLL support
Add support for the HDMI PHY/PLL found in MSM8996/APQ8096.
Unlike the previous PHYs supported in the driver, this doesn't need the powerup/powerdown ops. The
drm/msm/hdmi: HDMI 8996 PHY/PLL support
Add support for the HDMI PHY/PLL found in MSM8996/APQ8096.
Unlike the previous PHYs supported in the driver, this doesn't need the powerup/powerdown ops. The PLL prepare/unprepare clock ops enable/disable the phy itself.
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
Revision tags: v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6 |
|
#
feea39a8 |
| 04-Aug-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/msm: drop use of drmP.h Drop the deprecated drmP.h header file, and trim msm_drv.h to the relevant include files. This resulted in a suprisingly many edits as many files rel
drm/msm: drop use of drmP.h Drop the deprecated drmP.h header file, and trim msm_drv.h to the relevant include files. This resulted in a suprisingly many edits as many files relied on headers included via msm_drv.h. But msm_drv.h is not supposed to carry include files it do not need, so the individual files have to include what extra they needs. v2: - Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Carsten Behling <carsten.behling@googlemail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Todor Tomov <todor.tomov@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
show more ...
|
Revision tags: v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
97fb5e8d |
| 29-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19 |
|
#
6a41da17 |
| 20-Oct-2018 |
Mamta Shukla <mamtashukla555@gmail.com> |
drm: msm: Use DRM_DEV_* instead of dev_* Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate drm-formatted specific log messages so that it will be easy to differen
drm: msm: Use DRM_DEV_* instead of dev_* Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate drm-formatted specific log messages so that it will be easy to differentiate in case of multiple instances of driver. Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
Revision tags: v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14 |
|
#
aede1e9e |
| 16-Oct-2017 |
Rob Clark <robdclark@gmail.com> |
drm/msm/hdmi: convert to msm_clk_get() We already have, as a result of upstreaming the gpu bindings, msm_clk_get() which will try to get the clock both without and with a "_clk" suff
drm/msm/hdmi: convert to msm_clk_get() We already have, as a result of upstreaming the gpu bindings, msm_clk_get() which will try to get the clock both without and with a "_clk" suffix. Use this in HDMI code so we can drop the "_clk" suffix in bindings while maintaing backwards compatibility. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org>
show more ...
|
Revision tags: v4.13.5, v4.13, v4.12 |
|
#
aacd9e6b |
| 14-Jun-2017 |
Archit Taneja <architt@codeaurora.org> |
drm/msm/hdmi: Remove mmagic_iface_clk from the 8x96 PHY clocks This was used as a placeholder. It was never really input to the MDSS/HDMI clocks. Signed-off-by: Archit Taneja <a
drm/msm/hdmi: Remove mmagic_iface_clk from the 8x96 PHY clocks This was used as a placeholder. It was never really input to the MDSS/HDMI clocks. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
#
b474cbbb |
| 16-Jun-2017 |
Archit Taneja <architt@codeaurora.org> |
drm/msm/hdmi: 8996 PLL: Populate unprepare Without doing anything in unprepare, the HDMI driver isn't able to switch modes successfully. Calling set_rate with a new rate results in a
drm/msm/hdmi: 8996 PLL: Populate unprepare Without doing anything in unprepare, the HDMI driver isn't able to switch modes successfully. Calling set_rate with a new rate results in an un-locked PLL. If we reset the PLL in unprepare, the PLL is able to lock with the new rate. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28 |
|
#
73b65b19 |
| 27-Oct-2016 |
Archit Taneja <architt@codeaurora.org> |
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers.
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers. The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use. One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand. We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them. Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
Revision tags: v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3 |
|
#
fcda50c8 |
| 22-Feb-2016 |
Arnd Bergmann <arnd@arndb.de> |
drm/msm: rename hdmi symbols Global symbols in the kernel should be prefixed by the name of the subsystem and/or driver to avoid conflicts when all code is built-in. In this
drm/msm: rename hdmi symbols Global symbols in the kernel should be prefixed by the name of the subsystem and/or driver to avoid conflicts when all code is built-in. In this case, function names like 'hdmi_register' or 'hdmi_set_mode' are way too generic for an MSM specific DRM driver, so I'm renaming them all to msm_hdmi_* here. I also rename a lot of the 'static' symbols along with the global names for consistency, even though those are relatively harmless; they might only be slightly confusing when they show up in backtraces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|
#
e17afdce |
| 24-Feb-2016 |
Archit Taneja <architt@codeaurora.org> |
drm/msm/hdmi: HDMI 8996 PHY/PLL support Add support for the HDMI PHY/PLL found in MSM8996/APQ8096. Unlike the previous PHYs supported in the driver, this doesn't need the poweru
drm/msm/hdmi: HDMI 8996 PHY/PLL support Add support for the HDMI PHY/PLL found in MSM8996/APQ8096. Unlike the previous PHYs supported in the driver, this doesn't need the powerup/powerdown ops. The PLL prepare/unprepare clock ops enable/disable the phy itself. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
show more ...
|