drm/msm/dp: Add DisplayPort controller for SM8650

[ Upstream commit 1b2d98bdd7b7c64265732f5f0dace4c52c9ba8a8 ]

The Qualcomm SM8650 platform comes with a DisplayPort controller
with a different base

drm/msm/dp: Add DisplayPort controller for SM8650

[ Upstream commit 1b2d98bdd7b7c64265732f5f0dace4c52c9ba8a8 ]

The Qualcomm SM8650 platform comes with a DisplayPort controller
with a different base offset than the previous SM8550 SoC,
add support for this in the DisplayPort driver.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571132/
Link: https://lore.kernel.org/r/20231207-topic-sm8650-upstream-dp-v1-2-b762c06965bb@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/msm/dp: Free resources after unregistering them

The DP component's unbind operation walks through the submodules to
unregister and clean things up. But if the unbind happens because the DP
contr

drm/msm/dp: Free resources after unregistering them

The DP component's unbind operation walks through the submodules to
unregister and clean things up. But if the unbind happens because the DP
controller itself is being removed, all the memory for those submodules
has just been freed.

Change the order of these operations to avoid the many use-after-free
that otherwise happens in this code path.

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542166/
Link: https://lore.kernel.org/r/20230612220259.1884381-1-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Drop aux devices together with DP controller

Using devres to depopulate the aux bus made sure that upon a probe
deferral the EDP panel device would be destroyed and recreated upon next
a

drm/msm/dp: Drop aux devices together with DP controller

Using devres to depopulate the aux bus made sure that upon a probe
deferral the EDP panel device would be destroyed and recreated upon next
attempt.

But the struct device which the devres is tied to is the DPUs
(drm_dev->dev), which may be happen after the DP controller is torn
down.

Indications of this can be seen in the commonly seen EDID-hexdump full
of zeros in the log, or the occasional/rare KASAN fault where the
panel's attempt to read the EDID information causes a use after free on
DP resources.

It's tempting to move the devres to the DP controller's struct device,
but the resources used by the device(s) on the aux bus are explicitly
torn down in the error path. The KASAN-reported use-after-free also
remains, as the DP aux "module" explicitly frees its devres-allocated
memory in this code path.

As such, explicitly depopulate the aux bus in the error path, and in the
component unbind path, to avoid these issues.

Fixes: 2b57f726611e ("drm/msm/dp: fix aux-bus EP lifetime")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/542163/
Link: https://lore.kernel.org/r/20230612220106.1884039-1-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable

The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pin

drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable

The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.

Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text

Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();

Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()

Changes in V6:
-- squash remove enable_irq() and disable_irq()

Fixes: cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

drm/msm/dp: remove most of usbpd-related remains

Remove most of remains of downstream usbpd code. Mainline kernel uses
different approach for managing Type-C / USB-PD, so this remains unused.

Signe

drm/msm/dp: remove most of usbpd-related remains

Remove most of remains of downstream usbpd code. Mainline kernel uses
different approach for managing Type-C / USB-PD, so this remains unused.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/538270/
Link: https://lore.kernel.org/r/20230520182050.4014143-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: add module parameter for PSR

On sc7280 where eDP is the primary display, PSR is causing
IGT breakage even for basic test cases like kms_atomic and
kms_atomic_transition. Most often the i

drm/msm/dp: add module parameter for PSR

On sc7280 where eDP is the primary display, PSR is causing
IGT breakage even for basic test cases like kms_atomic and
kms_atomic_transition. Most often the issue starts with below
stack so providing that as reference

Call trace:
dpu_encoder_assign_crtc+0x64/0x6c
dpu_crtc_enable+0x188/0x204
drm_atomic_helper_commit_modeset_enables+0xc0/0x274
msm_atomic_commit_tail+0x1a8/0x68c
commit_tail+0xb0/0x160
drm_atomic_helper_commit+0x11c/0x124
drm_atomic_commit+0xb0/0xdc
drm_atomic_connector_commit_dpms+0xf4/0x110
drm_mode_obj_set_property_ioctl+0x16c/0x3b0
drm_connector_property_set_ioctl+0x4c/0x74
drm_ioctl_kernel+0xec/0x15c
drm_ioctl+0x264/0x408
__arm64_sys_ioctl+0x9c/0xd4
invoke_syscall+0x4c/0x110
el0_svc_common+0x94/0xfc
do_el0_svc+0x3c/0xb0
el0_svc+0x2c/0x7c
el0t_64_sync_handler+0x48/0x114
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
[drm-dp] dp_ctrl_push_idle: PUSH_IDLE pattern timedout

Other basic use-cases still seem to work fine hence add a
a module parameter to allow toggling psr enable/disable till
PSR related issues are hashed out with IGT.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/534420/
Link: https://lore.kernel.org/r/20230427232848.5200-1-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

drm/msm/dp: unregister audio driver during unbind

while binding the code always registers a audio driver, however there
is no corresponding unregistration done in unbind. This leads to multiple
redu

drm/msm/dp: unregister audio driver during unbind

while binding the code always registers a audio driver, however there
is no corresponding unregistration done in unbind. This leads to multiple
redundant audio platform devices if dp_display_bind and dp_display_unbind
happens multiple times during startup. On X13s platform this resulted in
6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports.

Fix this by unregistering codecs on unbind.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/533324/
Link: https://lore.kernel.org/r/20230421145657.12186-1-srinivas.kandagatla@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

show more ...

drm/msm/dp: Return IRQ_NONE for unhandled interrupts

If our interrupt handler gets called and we don't really handle the
interrupt then we should return IRQ_NONE. The current interrupt
handler didn'

drm/msm/dp: Return IRQ_NONE for unhandled interrupts

If our interrupt handler gets called and we don't really handle the
interrupt then we should return IRQ_NONE. The current interrupt
handler didn't do this, so let's fix it.

NOTE: for some of the cases it's clear that we should return IRQ_NONE
and some cases it's clear that we should return IRQ_HANDLED. However,
there are a few that fall somewhere in between. Specifically, the
documentation for when to return IRQ_NONE vs. IRQ_HANDLED is probably
best spelled out in the commit message of commit d9e4ad5badf4 ("Document
that IRQ_NONE should be returned when IRQ not actually handled"). That
commit makes it clear that we should return IRQ_HANDLED if we've done
something to make the interrupt stop happening.

The case where it's unclear is, for instance, in dp_aux_isr() after
we've read the interrupt using dp_catalog_aux_get_irq() and confirmed
that "isr" is non-zero. The function dp_catalog_aux_get_irq() not only
reads the interrupts but it also "ack"s all the interrupts that are
returned. For an "unknown" interrupt this has a very good chance of
actually stopping the interrupt from happening. That would mean we've
identified that it's our device and done something to stop them from
happening and should return IRQ_HANDLED. Specifically, it should be
noted that most interrupts that need "ack"ing are ones that are
one-time events and doing an "ack" is enough to clear them. However,
since these interrupts are unknown then, by definition, it's unknown
if "ack"ing them is truly enough to clear them. It's possible that we
also need to remove the original source of the interrupt. In this
case, IRQ_NONE would be a better choice.

Given that returning an occasional IRQ_NONE isn't the absolute end of
the world, however, let's choose that course of action. The IRQ
framework will forgive a few IRQ_NONE returns now and again (and it
won't even log them, which is why we have to log them ourselves). This
means that if we _do_ end hitting an interrupt where "ack"ing isn't
enough the kernel will eventually detect the problem and shut our
device down.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520660/
Link: https://lore.kernel.org/r/20230126170745.v2.2.I2d7aec2fadb9c237cd0090a47d6a8ba2054bf0f8@changeid
[DB: reformatted commit message to make checkpatch happy]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: use the eDP bridge ops to validate eDP modes

The eDP and DP interfaces shared the bridge operations and
the eDP specific changes were implemented under is_edp check.
To add psr support f

drm/msm/dp: use the eDP bridge ops to validate eDP modes

The eDP and DP interfaces shared the bridge operations and
the eDP specific changes were implemented under is_edp check.
To add psr support for eDP, we started using a new set of eDP
bridge ops. We are moving the eDP specific code in the
dp_bridge_mode_valid function to a new eDP function,
edp_bridge_mode_valid under the eDP bridge ops.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524736/
Link: https://lore.kernel.org/r/1677774797-31063-11-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Add basic PSR support for eDP

Add support for basic panel self refresh (PSR) feature for eDP.
Add a new interface to set PSR state in the sink from DPU.
Program the eDP controller to iss

drm/msm/dp: Add basic PSR support for eDP

Add support for basic panel self refresh (PSR) feature for eDP.
Add a new interface to set PSR state in the sink from DPU.
Program the eDP controller to issue PSR enter and exit SDP to
the sink.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524734/
Link: https://lore.kernel.org/r/1677774797-31063-10-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: use atomic callbacks for DP bridge ops

Use atomic variants for DP bridge callback functions so that
the atomic state can be accessed in the interface drivers.
The atomic state will help

drm/msm/dp: use atomic callbacks for DP bridge ops

Use atomic variants for DP bridge callback functions so that
the atomic state can be accessed in the interface drivers.
The atomic state will help the driver find out if the display
is in self refresh state.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/524731/
Link: https://lore.kernel.org/r/1677774797-31063-9-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Remove INIT_SETUP delay

During initalization of the DisplayPort controller an EV_HPD_INIT_SETUP
event is generated, but with a delay of 100 units. This delay existed to
circumvent bug in

drm/msm/dp: Remove INIT_SETUP delay

During initalization of the DisplayPort controller an EV_HPD_INIT_SETUP
event is generated, but with a delay of 100 units. This delay existed to
circumvent bug in the QMP combo PHY driver, where if the DP part was
powered up before USB, the common properties would not be properly
initialized - and USB wouldn't work.

This issue was resolved in the recent refactoring of the QMP driver,
so it's now possible to remove this delay.

While there is still a timing dependency in the current implementation,
test indicates that it's now possible to boot with an external display
on USB Type-C and have the display power up, without disconnecting and
reconnecting the cable.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/518729/
Link: https://lore.kernel.org/r/20230117172951.2748456-1-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: add support of max dp link rate

By default, HBR2 (5.4G) is the max link rate be supported. This patch
uses the actual limit specified by DT and removes the artificial
limitation to 5.4 G

drm/msm/dp: add support of max dp link rate

By default, HBR2 (5.4G) is the max link rate be supported. This patch
uses the actual limit specified by DT and removes the artificial
limitation to 5.4 Gbps. Supporting HBR3 is a consequence of that.

Changes in v2:
-- add max link rate from dtsi

Changes in v3:
-- parser max_data_lanes and max_dp_link_rate from dp_out endpoint

Changes in v4:
-- delete unnecessary pr_err

Changes in v5:
-- split parser function into different patch

Changes in v9:
-- revised commit test

Changes in v13:
-- repalced "properity" with "property"

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516097/
Link: https://lore.kernel.org/r/1672163103-31254-6-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Implement hpd_notify()

The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
physical signal on a GPIO pin into the controller. This is not always
possible, either beca

drm/msm/dp: Implement hpd_notify()

The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
physical signal on a GPIO pin into the controller. This is not always
possible, either because there aren't dedicated GPIOs available or
because the hot-plug signal is a virtual notification, in cases such as
USB Type-C.

For these cases, by implementing the hpd_notify() callback for the
DisplayPort controller's drm_bridge, a downstream drm_bridge
(next_bridge) can be used to track and signal the connection status
changes.

This makes it possible to use downstream drm_bridges such as
display-connector or any virtual mechanism, as long as they are
implemented as a drm_bridge.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514410/
Link: https://lore.kernel.org/r/20221207220012.16529-10-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Rely on hpd_enable/disable callbacks

The DisplayPort controller's internal HPD interrupt handling is used for
cases where the HPD signal is connected to a GPIO which is pinmuxed into
the

drm/msm/dp: Rely on hpd_enable/disable callbacks

The DisplayPort controller's internal HPD interrupt handling is used for
cases where the HPD signal is connected to a GPIO which is pinmuxed into
the DisplayPort controller. In other configurations the HPD notification
might be delivered by the DRM framework from an associated bridge.

This difference is not appropriately represented by the "is_edp"
boolean, but is properly represented by the frameworks invocation of the
hpd_enable() and hpd_disable() callbacks. Switch the current condition
to rely on these callbacks instead.

This ensures appropriate handling of the three cases; no bridge
connected, a bridge without DRM_BRIDGE_OP_HPD and a bridge with
DRM_BRIDGE_OP_HPD.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514414/
Link: https://lore.kernel.org/r/20221207220012.16529-9-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Add SDM845 DisplayPort instance

The Qualcomm SDM845 platform has a single DisplayPort controller, with
the same design as SC7180, so add support for this by reusing the SC7180
definition

drm/msm/dp: Add SDM845 DisplayPort instance

The Qualcomm SDM845 platform has a single DisplayPort controller, with
the same design as SC7180, so add support for this by reusing the SC7180
definition.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514395/
Link: https://lore.kernel.org/r/20221207220012.16529-8-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Add DP and EDP compatibles for SC8280XP

The SC8280XP platform has four DisplayPort controllers, per MDSS
instance, all with widebus support.

The first two are defined to be DisplayPort

drm/msm/dp: Add DP and EDP compatibles for SC8280XP

The SC8280XP platform has four DisplayPort controllers, per MDSS
instance, all with widebus support.

The first two are defined to be DisplayPort only, while the latter pair
(of each instance) can be either DisplayPort or Embedded DisplayPort.
The two sets are tied to the possible compatibels.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514394/
Link: https://lore.kernel.org/r/20221207220012.16529-7-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: Stop using DP id as index in desc

In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.

By not relyin

drm/msm/dp: Stop using DP id as index in desc

In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.

By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.

While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514397/
Link: https://lore.kernel.org/r/20221207220012.16529-6-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_co

drm/msm: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com

show more ...

drm/msm/dp: drop modeset sanity checks

Drop the overly defensive modeset sanity checks of function parameters
which have already been checked or used by the callers.

Reviewed-by: Dmitry Baryshkov <

drm/msm/dp: drop modeset sanity checks

Drop the overly defensive modeset sanity checks of function parameters
which have already been checked or used by the callers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502674/
Link: https://lore.kernel.org/r/20220913085320.8577-10-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dp: fix bridge lifetime

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding

drm/msm/dp: fix bridge lifetime

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of the aggregate device is deferred.

This can lead resource leaks or failure to bind the aggregate device
when binding is later retried and a second attempt to allocate the
resources is made.

For the DP bridges, previously allocated bridges will leak on probe
deferral.

Fix this by amending the DP parser interface and tying the lifetime of
the bridge device to the DRM device rather than DP platform device.

Fixes: c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus")
Cc: stable@vger.kernel.org # 5.19
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502667/
Link: https://lore.kernel.org/r/20220913085320.8577-8-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

show more ...

drm/msm/dp: fix aux-bus EP lifetime

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when bind

drm/msm/dp: fix aux-bus EP lifetime

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of the aggregate device is deferred.

This can lead resource leaks or failure to bind the aggregate device
when binding is later retried and a second attempt to allocate the
resources is made.

For the DP aux-bus, an attempt to populate the bus a second time will
simply fail ("DP AUX EP device already populated").

Fix this by tying the lifetime of the EP device to the DRM device rather
than DP controller platform device.

Fixes: c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus")
Cc: stable@vger.kernel.org # 5.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502672/
Link: https://lore.kernel.org/r/20220913085320.8577-7-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

show more ...

drm/msm/dp: fix IRQ lifetime

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of

drm/msm/dp: fix IRQ lifetime

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of the aggregate device is deferred.

This is specifically true for the DP IRQ, which will otherwise remain
requested so that the next bind attempt fails when requesting the IRQ a
second time.

Since commit c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus")
this can happen when the aux-bus panel driver has not yet been loaded so
that probe is deferred.

Fix this by tying the device-managed lifetime of the DP IRQ to the DRM
device so that it is released when bind fails.

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Cc: stable@vger.kernel.org # 5.10
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502679/
Link: https://lore.kernel.org/r/20220913085320.8577-6-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

show more ...

drm/msm/dp: fix memory corruption with too many bridges

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
th

drm/msm/dp: fix memory corruption with too many bridges

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.

Fixes: 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Cc: stable@vger.kernel.org # 5.17
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502664/
Link: https://lore.kernel.org/r/20220913085320.8577-3-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

show more ...

drm/msm/dp: remove dp_display_en/disable prototypes and data argument

Remove unused dp_display_en/disable prototypes. While we are at it,
remove extra 'data' argument that is unused.

Signed-off-by:

drm/msm/dp: remove dp_display_en/disable prototypes and data argument

Remove unused dp_display_en/disable prototypes. While we are at it,
remove extra 'data' argument that is unused.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490104/
Link: https://lore.kernel.org/r/20220617232434.1139950-3-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...