drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled

[ Upstream commit 06267d22f9ee6fd34150b6dcdb2fa6983e1a85bc ]

When the topology calls for two interfaces on the current fixed topo

drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled

[ Upstream commit 06267d22f9ee6fd34150b6dcdb2fa6983e1a85bc ]

When the topology calls for two interfaces on the current fixed topology
of 2 DSC blocks, or uses 1 DSC block for a single interface (e.g. SC7280
with only one DSC block), there should be no merging of DSC output.

This is already represented by the return value of
dpu_encoder_use_dsc_merge(), but not yet used to correctly configure
this flag.

Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577067/
Link: https://lore.kernel.org/r/20240204-dpu-dsc-multiplex-v1-1-080963233c52@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN

[ Upstream commit 2f4a67a3894e15c135125cb54edc5b43abc1b70e ]

Currently INTF_CFG2_DATA_HCTL_EN is coupled with the enablement
of widebus bu

drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN

[ Upstream commit 2f4a67a3894e15c135125cb54edc5b43abc1b70e ]

Currently INTF_CFG2_DATA_HCTL_EN is coupled with the enablement
of widebus but this is incorrect because we should be enabling
this bit independent of widebus except for cases where compression
is enabled in one pixel per clock mode.

Fix this by making the condition checks more explicit and enabling
INTF_CFG2_DATA_HCTL_EN for all other cases when supported by DPU.

Fixes: 3309a7563971 ("drm/msm/dpu: revise timing engine programming to support widebus feature")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/576722/
Link: https://lore.kernel.org/r/20240201004737.2478-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup

[ Upstream commit 7f3d03c48b1eb6bc45ab20ca98b8b11be25f9f52 ]

The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writ

drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup

[ Upstream commit 7f3d03c48b1eb6bc45ab20ca98b8b11be25f9f52 ]

The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.

Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/574878/
Link: https://lore.kernel.org/r/20240117194109.21609-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/msm/dpu: Ratelimit framedone timeout msgs

[ Upstream commit 2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ]

When we start getting these, we get a *lot*. So ratelimit it to not
flood dmesg.

Signed-

drm/msm/dpu: Ratelimit framedone timeout msgs

[ Upstream commit 2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ]

When we start getting these, we get a *lot*. So ratelimit it to not
flood dmesg.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/571584/
Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/msm/dpu: Drop enable and frame_count parameters from dpu_hw_setup_misr()

[ Upstream commit 3313c23f3eab698bc6b904520ee608fc0f7b03d0 ]

Drop the enable and frame_count parameters from dpu_hw_setu

drm/msm/dpu: Drop enable and frame_count parameters from dpu_hw_setup_misr()

[ Upstream commit 3313c23f3eab698bc6b904520ee608fc0f7b03d0 ]

Drop the enable and frame_count parameters from dpu_hw_setup_misr() as they
are always set to the same values.

In addition, replace MISR_FRAME_COUNT_MASK with MISR_FRAME_COUNT as
frame_count is always set to the same value.

Fixes: 7b37523fb1d1 ("drm/msm/dpu: Move MISR methods to dpu_hw_util")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/572009/
Link: https://lore.kernel.org/r/20231213-encoder-fixup-v4-2-6da6cd1bf118@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/msm/dpu: Drop encoder vsync_event

Drop vsync_event and vsync_event_work handlers as they are unnecessary.
In addition drop the dpu_enc_ktime_template event class as it will be
unused after the v

drm/msm/dpu: Drop encoder vsync_event

Drop vsync_event and vsync_event_work handlers as they are unnecessary.
In addition drop the dpu_enc_ktime_template event class as it will be
unused after the vsync_event handlers are dropped.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550983/
Link: https://lore.kernel.org/r/20230802-encoder-cleanup-v2-1-5bfdec0ce765@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: remove struct drm_dsc_config from struct msm_display_info

Since struct drm_dsc_config is stored at atomic_enable() instead
of display setup time during boot up, saving struct drm_dsc_co

drm/msm/dpu: remove struct drm_dsc_config from struct msm_display_info

Since struct drm_dsc_config is stored at atomic_enable() instead
of display setup time during boot up, saving struct drm_dsc_config
at struct msm_display_info is not necessary. Lets drop the dsc member
from struct msm_display_info.

Changes in v4:
-- fix "Since" at commit text

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543866/
Link: https://lore.kernel.org/r/1687454686-10340-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]

Currently struct drm_dsc_config for DSI is populated at display
setup during system boot up. This mechanism works fine with
embedded display

drm/msm/dpu: retrieve DSI DSC struct through priv->dsi[0]

Currently struct drm_dsc_config for DSI is populated at display
setup during system boot up. This mechanism works fine with
embedded display but not for pluggable displays as the
struct drm_dsc_config will become stale once external display
is unplugged.

In preparation of adding support for DP DSC support
move storing of DSI DSC struct to atomic_enable() so that same
mechanism will work for both embedded display and pluggable
displays.

Changes in v4:
-- fix checkpatch.pl warning

Changes in v5:
-- delete dpu_encoder_get_dsc_config() from atomic_mode_set

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543867/
Link: https://lore.kernel.org/r/1687454686-10340-2-git-send-email-quic_khsieh@quicinc.com
[DB: fixed commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: use PINGPONG_NONE to unbind WB from PP

Currently the driver passes the PINGPONG index to
dpu_hw_wb_ops::bind_pingpong_blk() callback and uses separate boolean
flag to tell whether WB sh

drm/msm/dpu: use PINGPONG_NONE to unbind WB from PP

Currently the driver passes the PINGPONG index to
dpu_hw_wb_ops::bind_pingpong_blk() callback and uses separate boolean
flag to tell whether WB should be bound or unbound. Simplify this by
passing PINGPONG_NONE in case of unbinding and drop the flag completely.

Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/540969/
Link: https://lore.kernel.org/r/20230604031308.894274-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: use PINGPONG_NONE to unbind INTF from PP

Currently the driver passes the PINGPONG index to
dpu_hw_intf_ops::bind_pingpong_blk() callback and uses separate boolean
flag to tell whether I

drm/msm/dpu: use PINGPONG_NONE to unbind INTF from PP

Currently the driver passes the PINGPONG index to
dpu_hw_intf_ops::bind_pingpong_blk() callback and uses separate boolean
flag to tell whether INTF should be bound or unbound. Simplify this by
passing PINGPONG_NONE in case of unbinding and drop the flag completely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/540968/
Link: https://lore.kernel.org/r/20230604031308.894274-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: call dpu_rm_get_intf() from dpu_encoder_get_intf()

There is little sense to get intf index just to call dpu_rm_get_intf()
on it. Move dpu_rm_get_intf() call to dpu_encoder_get_intf() fu

drm/msm/dpu: call dpu_rm_get_intf() from dpu_encoder_get_intf()

There is little sense to get intf index just to call dpu_rm_get_intf()
on it. Move dpu_rm_get_intf() call to dpu_encoder_get_intf() function.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540632/
Link: https://lore.kernel.org/r/20230601172236.564445-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: inline dpu_encoder_get_wb()

The function dpu_encoder_get_wb() returns controller_id if the
corresponding WB is present in the catalog. We can inline this function
and rely on dpu_rm_get

drm/msm/dpu: inline dpu_encoder_get_wb()

The function dpu_encoder_get_wb() returns controller_id if the
corresponding WB is present in the catalog. We can inline this function
and rely on dpu_rm_get_wb() returning NULL for indices for which the
WB is not present on the device.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540634/
Link: https://lore.kernel.org/r/20230601172236.564445-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: drop duplicated intf/wb indices from encoder structs

Remove intf_idx and wb_idx fields from struct dpu_encoder_phys and
struct dpu_enc_phys_init_params. Set the hw_intf and hw_wb direct

drm/msm/dpu: drop duplicated intf/wb indices from encoder structs

Remove intf_idx and wb_idx fields from struct dpu_encoder_phys and
struct dpu_enc_phys_init_params. Set the hw_intf and hw_wb directly and
use them to get the instance index.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540635/
Link: https://lore.kernel.org/r/20230601172236.564445-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: separate common function to init physical encoder

Move common DPU physical encoder initialization code to the new function
dpu_encoder_phys_init().

Reviewed-by: Abhinav Kumar <quic_abh

drm/msm/dpu: separate common function to init physical encoder

Move common DPU physical encoder initialization code to the new function
dpu_encoder_phys_init().

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540630/
Link: https://lore.kernel.org/r/20230601172236.564445-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: merge dpu_encoder_init() and dpu_encoder_setup()

There is no reason to split the dpu_encoder interface into separate
_init() and _setup() phases. Merge them into a single function.

Rev

drm/msm/dpu: merge dpu_encoder_init() and dpu_encoder_setup()

There is no reason to split the dpu_encoder interface into separate
_init() and _setup() phases. Merge them into a single function.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Patchwork: https://patchwork.freedesktop.org/patch/540628/
Link: https://lore.kernel.org/r/20230601172236.564445-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: Tear down DSC datapath on encoder cleanup

Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
to tear down DSC data

drm/msm/dpu: Tear down DSC datapath on encoder cleanup

Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
to tear down DSC data path if DSC data path was setup previous.

Changes in V10:
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- move both dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() to above phys_cleanup()

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539515/
Link: https://lore.kernel.org/r/1685036458-22683-11-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: separate DSC flush update out of interface

Currently DSC flushing happens during interface configuration at
dpu_hw_ctl_intf_cfg_v1(). Separate DSC flush away from
dpu_hw_ctl_intf_cfg_v1

drm/msm/dpu: separate DSC flush update out of interface

Currently DSC flushing happens during interface configuration at
dpu_hw_ctl_intf_cfg_v1(). Separate DSC flush away from
dpu_hw_ctl_intf_cfg_v1() by adding dpu_hw_ctl_update_pending_flush_dsc_v1()
to handle both per-DSC engine and DSC flush bits at same time to make it
consistent with the location of flush programming of other DPU sub-blocks.

Changes in v10:
-- rewording commit text
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- ctx->pending_dsc_flush_mask = 0;

Changes in v11:
-- add Fixes tag

Changes in v12:
-- move dsc parameter to next line at dpu_encoder_dsc_pipe_cfg()

Changes in v14:
-- Fixes tag had been move to 1st patch of this series

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539506/
Link: https://lore.kernel.org/r/1685036458-22683-9-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG

Disabling the crossbar mux between DSC and PINGPONG currently
requires a bogus enum dpu_pingpong value to be passed when calling

drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG

Disabling the crossbar mux between DSC and PINGPONG currently
requires a bogus enum dpu_pingpong value to be passed when calling
dsc_bind_pingpong_blk() with enable=false, even though the register
value written is independent of the current PINGPONG block. Replace
that `bool enable` parameter with a new PINGPONG_NONE dpu_pingpong
flag that triggers the write of the "special" 0xF "crossbar
disabled" value to the register instead.

Changes in v4:
-- more details to commit text

Changes in v5:
-- rewording commit text suggested by Marijn
-- add DRM_DEBUG_KMS for DSC unbinding case

Changes in v8:
-- fix checkpatch warning

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/539505/
Link: https://lore.kernel.org/r/1685036458-22683-6-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: drop (mostly) unused DPU_NAME_SIZE define

This define is used only in one place, in dpu_encoder debugfs code.
Inline the value and drop the define completely.

Signed-off-by: Dmitry Bar

drm/msm/dpu: drop (mostly) unused DPU_NAME_SIZE define

This define is used only in one place, in dpu_encoder debugfs code.
Inline the value and drop the define completely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538303/
Link: https://lore.kernel.org/r/20230521192230.9747-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: drop dpu_encoder_phys_ops::late_register()

This callback has been unused since the driver being added. Drop it now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Review

drm/msm/dpu: drop dpu_encoder_phys_ops::late_register()

This callback has been unused since the driver being added. Drop it now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/538302/
Link: https://lore.kernel.org/r/20230521192230.9747-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: Implement tearcheck support on INTF block

Since DPU 5.0.0 the TEARCHECK registers and interrupts moved out of the
PINGPONG block and into the INTF. Implement the necessary callbacks in

drm/msm/dpu: Implement tearcheck support on INTF block

Since DPU 5.0.0 the TEARCHECK registers and interrupts moved out of the
PINGPONG block and into the INTF. Implement the necessary callbacks in
the INTF block, and use these callbacks together with the INTF_TEAR
interrupts.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534234/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-21-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: simplify intf allocation code

Rather than passing DRM_MODE_ENCODER_* and letting dpu_encoder to guess,
which intf type we mean, pass INTF_DSI/INTF_DP directly. This is
required to suppo

drm/msm/dpu: simplify intf allocation code

Rather than passing DRM_MODE_ENCODER_* and letting dpu_encoder to guess,
which intf type we mean, pass INTF_DSI/INTF_DP directly. This is
required to support HDMI output in DPU, as both DP and HDMI encoders are
DRM_MODE_ENCODER_TMDS. Thus dpu_encoder code can not make a difference
between HDMI and DP outputs.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Arnaud Vrac <rawoul@gmail.com>
Tested-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/532370/
Link: https://lore.kernel.org/r/20230415171926.85774-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: avoid unnecessary check in DPU reservations

Return immediately on failure, this will make dpu reservations
part look cleaner.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Rev

drm/msm/dpu: avoid unnecessary check in DPU reservations

Return immediately on failure, this will make dpu reservations
part look cleaner.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/522442/
Link: https://lore.kernel.org/r/1676286704-818-4-git-send-email-quic_kalyant@quicinc.com
[DB: fixed merge conflict with b6975693846b, retain those changes]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: add DSPPs into reservation upon a CTM request

Add DSPP blocks into the topology for reservation, if there
is a CTM request for that composition.

Signed-off-by: Kalyan Thota <quic_kalya

drm/msm/dpu: add DSPPs into reservation upon a CTM request

Add DSPP blocks into the topology for reservation, if there
is a CTM request for that composition.

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/522445/
Link: https://lore.kernel.org/r/1676286704-818-3-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

drm/msm/dpu: Remove empty prepare_commit() function

Now that the TE setup has been moved to prepare_for_kickoff(), we have
not prepare_commit() callbacks left. This makes dpu_encoder_prepare_commit

drm/msm/dpu: Remove empty prepare_commit() function

Now that the TE setup has been moved to prepare_for_kickoff(), we have
not prepare_commit() callbacks left. This makes dpu_encoder_prepare_commit()
do nothing. Remove prepare_commit() from DPU driver.

Changes in V3:
- Reworded commit message to be more clear
- Corrected spelling mistake in commit message

Changes in V4:
- Reworded commit message for clarity

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/523606/
Link: https://lore.kernel.org/r/20230221184256.1436-4-quic_jesszhan@quicinc.com
[DB: fixed merge conflict]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...