History log of /openbmc/linux/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c (Results 1 – 25 of 38)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42
# 5598c9bf 25-Jul-2023 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Restore efficient freq earlier

This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually b

drm/i915/guc/slpc: Restore efficient freq earlier

This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.

Specifically, this scenario-

- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn

This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.

v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf23 ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com
(cherry picked from commit 28e671114fb0f28f334fac8d0a6b9c395c7b0498)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...


# 28e67111 25-Jul-2023 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Restore efficient freq earlier

This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually b

drm/i915/guc/slpc: Restore efficient freq earlier

This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.

Specifically, this scenario-

- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn

This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.

v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf23 ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35
# 3e49de73 20-Jun-2023 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Apply min softlimit correctly

The scenario being fixed here is depicted in the following sequence-

modprobe i915
echo 1 > /sys/class/drm/card0/gt/gt0/slpc_ignore_eff_freq
echo 30

drm/i915/guc/slpc: Apply min softlimit correctly

The scenario being fixed here is depicted in the following sequence-

modprobe i915
echo 1 > /sys/class/drm/card0/gt/gt0/slpc_ignore_eff_freq
echo 300 > /sys/class/drm/card0/gt_min_freq_mhz (RPn)
cat /sys/class/drm/card0/gt_cur_freq_mhz --> cur == RPn as expected
echo 1 > /sys/kernel/debug/dri/0/gt0/reset --> reset
cat /sys/class/drm/card0/gt_min_freq_mhz --> cached freq is RPn
cat /sys/class/drm/card0/gt_cur_freq_mhz --> it's not RPn, but RPe!!

When SLPC reinitializes, it sets SLPC min freq to efficient frequency.
Even if we disable efficient freq post that, we should restore the cached
min freq (via H2G) for it to take effect.

v2: Clarify commit message (Ashutosh)

Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621014257.1769564-1-vinay.belgaumkar@intel.com
(cherry picked from commit da86b2b13f1d1ca26745b951ac94421f3137539a)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...


# da86b2b1 20-Jun-2023 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Apply min softlimit correctly

The scenario being fixed here is depicted in the following sequence-

modprobe i915
echo 1 > /sys/class/drm/card0/gt/gt0/slpc_ignore_eff_freq
echo 30

drm/i915/guc/slpc: Apply min softlimit correctly

The scenario being fixed here is depicted in the following sequence-

modprobe i915
echo 1 > /sys/class/drm/card0/gt/gt0/slpc_ignore_eff_freq
echo 300 > /sys/class/drm/card0/gt_min_freq_mhz (RPn)
cat /sys/class/drm/card0/gt_cur_freq_mhz --> cur == RPn as expected
echo 1 > /sys/kernel/debug/dri/0/gt0/reset --> reset
cat /sys/class/drm/card0/gt_min_freq_mhz --> cached freq is RPn
cat /sys/class/drm/card0/gt_cur_freq_mhz --> it's not RPn, but RPe!!

When SLPC reinitializes, it sets SLPC min freq to efficient frequency.
Even if we disable efficient freq post that, we should restore the cached
min freq (via H2G) for it to take effect.

v2: Clarify commit message (Ashutosh)

Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621014257.1769564-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29
# 6f22587c 16-May-2023 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Disable rps_boost debugfs

rps_boost debugfs shows host turbo related info. This is not valid
when SLPC is enabled. guc_slpc_info already shows the number of boosts.
Add num_waiter

drm/i915/guc/slpc: Disable rps_boost debugfs

rps_boost debugfs shows host turbo related info. This is not valid
when SLPC is enabled. guc_slpc_info already shows the number of boosts.
Add num_waiters there as well and disable rps_boost when SLPC is
enabled.

v2: Replace Bug with Link to resolve checkpatch warning

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7632
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516154905.1048006-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v6.1.28, v6.1.27, v6.1.26
# 55f9720d 25-Apr-2023 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Provide sysfs for efficient freq

SLPC enables use of efficient freq at init by default. It is
possible for GuC to request frequencies that are higher than
the 'software' max if us

drm/i915/guc/slpc: Provide sysfs for efficient freq

SLPC enables use of efficient freq at init by default. It is
possible for GuC to request frequencies that are higher than
the 'software' max if user has set it lower than the efficient
level.

Scenarios/tests that require strict fixing of freq below the efficient
level will need to disable it through this interface.

v2: Keep just one interface to toggle sysfs. With this, user will
be completely responsible for toggling efficient frequency if need
be. There will be no implicit disabling when user sets min < RP1 (Ashutosh)

v3: Remove unused label, review comments (Ashutosh)

v4: Toggle efficient freq usage in SLPC selftest and checkpatch fixes

v5: Review comments (Andi) and add a separate patch for selftest updates

Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11
# 9847ffce 06-Feb-2023 John Harrison <John.C.Harrison@Intel.com>

drm/i915/guc: More debug print updates - GuC SLPC

Update a bunch more debug prints to use the new GT based scheme.

v2: Also change prints to use %pe for error values (MichalW).

Signed-off-by: John

drm/i915/guc: More debug print updates - GuC SLPC

Update a bunch more debug prints to use the new GT based scheme.

v2: Also change prints to use %pe for error values (MichalW).

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207050717.1833718-6-John.C.Harrison@Intel.com

show more ...


Revision tags: v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6
# 01e74274 26-Oct-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc: Support OA when Wa_16011777198 is enabled

On DG2, a w/a resets RCS/CCS before it goes into RC6. This breaks OA
since OA does not expect engine resets during its use. Fix it by
disablin

drm/i915/guc: Support OA when Wa_16011777198 is enabled

On DG2, a w/a resets RCS/CCS before it goes into RC6. This breaks OA
since OA does not expect engine resets during its use. Fix it by
disabling RC6.

v2: (Ashutosh)
- Bring back slpc_unset_param helper
- Update commit msg
- Use with_intel_runtime_pm helper for set/unset

v3: (Ashutosh)
- Just use intel_uc_uses_guc_rc

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-15-umesh.nerlige.ramappa@intel.com

show more ...


Revision tags: v6.0.5, v5.15.75, v6.0.4
# 37d52e44 24-Oct-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/slpc: Use platform limits for min/max frequency

GuC will set the min/max frequencies to theoretical max on
ATS-M. This will break kernel ABI, so limit min/max frequency
to RP0(platform max)

drm/i915/slpc: Use platform limits for min/max frequency

GuC will set the min/max frequencies to theoretical max on
ATS-M. This will break kernel ABI, so limit min/max frequency
to RP0(platform max) instead.

Also modify the SLPC selftest to update the min frequency
when we have a server part so that we can iterate between
platform min and max.

v2: Check softlimits instead of platform limits (Riana)
v3: More review comments (Ashutosh)
v4: No need to use saved_min_freq and other comments (Ashutosh)

Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/7030

Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024225453.4856-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64
# ff4e0caf 30-Aug-2022 Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/slpc: Fix inconsistent locked return

Fix for intel_guc_slpc_set_min_freq() warn:
inconsistent returns '&slpc->lock'.

v2: Avoid with_intel_runtime_pm with the
internal goto/return. (Ash

drm/i915/slpc: Fix inconsistent locked return

Fix for intel_guc_slpc_set_min_freq() warn:
inconsistent returns '&slpc->lock'.

v2: Avoid with_intel_runtime_pm with the
internal goto/return. (Ashutosh)
Also standardize the 'ret' if this came from
the efficient setup. And avoid the 'unlikely'.

Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830193537.52201-1-rodrigo.vivi@intel.com

show more ...


Revision tags: v5.15.63, v5.15.62
# 95ccf312 19-Aug-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Allow SLPC to use efficient frequency

Host Turbo operates at efficient frequency when GT is not idle unless
the user or workload has forced it to a higher level. Replicate the sam

drm/i915/guc/slpc: Allow SLPC to use efficient frequency

Host Turbo operates at efficient frequency when GT is not idle unless
the user or workload has forced it to a higher level. Replicate the same
behavior in SLPC by allowing the algorithm to use efficient frequency.
We had disabled it during boot due to concerns that it might break
kernel ABI for min frequency. However, this is not the case since
SLPC will still abide by the (min,max) range limits.

With this change, min freq will be at efficient frequency level at init
instead of fused min (RPn). If user chooses to reduce min freq below the
efficient freq, we will turn off usage of efficient frequency and honor
the user request. When a higher value is written, it will get toggled
back again.

The patch also corrects the register which needs to be read for obtaining
the correct efficient frequency for Gen9+.

We see much better perf numbers with benchmarks like glmark2 with
efficient frequency usage enabled as expected.

v2: Address review comments (Rodrigo)
v3: with efficient frequency being dynamic, it is possible that the req
frequency may go beyond max freq. This will cause SLPC selftests to fail.
Add a FIXME there to start the test with [RPn, RP0] instead and restore
it afterwards.

BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/5468

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820010832.15350-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56
# fdff0a85 18-Jul-2022 Ashutosh Dixit <ashutosh.dixit@intel.com>

drm/i915/gt: Expose per-gt RPS defaults in sysfs

Add the following sysfs files to gt/gtN/.defaults/:
* rps_min_freq_mhz
* rps_max_freq_mhz

v2: Correct gt/gtN/.defaults/* file names in commit messag

drm/i915/gt: Expose per-gt RPS defaults in sysfs

Add the following sysfs files to gt/gtN/.defaults/:
* rps_min_freq_mhz
* rps_max_freq_mhz

v2: Correct gt/gtN/.defaults/* file names in commit message
v3: Remove rps_boost_freq_mhz since it is not consumed by userspace

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf6e483bf79f871c2c8c74af6005bf6a83a3a1ce.1658192398.git.ashutosh.dixit@intel.com

show more ...


Revision tags: v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50
# 58eaa6b3 22-Jun-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Use non-blocking H2G for waitboost

SLPC min/max frequency updates require H2G calls. We are seeing
timeouts when GuC channel is backed up and it is unable to respond
in a timely f

drm/i915/guc/slpc: Use non-blocking H2G for waitboost

SLPC min/max frequency updates require H2G calls. We are seeing
timeouts when GuC channel is backed up and it is unable to respond
in a timely fashion causing warnings and affecting CI.

This is seen when waitboosting happens during a stress test.
this patch updates the waitboost path to use a non-blocking
H2G call instead, which returns as soon as the message is
successfully transmitted.

v2: Use drm_notice to report any errors that might occur while
sending the waitboost H2G request (Tvrtko)
v3: Add drm_notice inside force_min_freq (Ashutosh)

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623003225.23301-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44
# 26be7cd8 25-May-2022 Ashutosh Dixit <ashutosh.dixit@intel.com>

drm/i915/gt: Add media freq factor to per-gt sysfs

Expose new sysfs to program and retrieve media freq factor. Factor values
of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point
represen

drm/i915/gt: Add media freq factor to per-gt sysfs

Expose new sysfs to program and retrieve media freq factor. Factor values
of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point
representation (corresponding to integer values of 0, 128 and 256
respectively).

Media freq factor is converted to media_ratio_mode for GuC. It is
programmed into GuC using H2G SLPC interface. It is retrieved from GuC
through a register read. A cached media_ratio_mode is maintained to
preserve set values across GuC resets.

This patch adds the following sysfs files to gt/gtN sysfs:
* media_freq_factor
* media_freq_factor.scale

v2: Minor wording change in drm_warn (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7ad7578335d8af9cba047b4bcf33d1887453d2e1.1653484574.git.ashutosh.dixit@intel.com

show more ...


Revision tags: v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34
# f5df4d88 12-Apr-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Use i915_probe_error instead of drm_err

This will ensure we don't have false positives when we run
error injection tests.

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.

drm/i915/guc/slpc: Use i915_probe_error instead of drm_err

This will ensure we don't have false positives when we run
error injection tests.

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412224852.21501-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v5.15.33
# 56758cc4 06-Apr-2022 Ashutosh Dixit <ashutosh.dixit@intel.com>

drm/i915/rps: Centralize computation of freq caps

Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
d

drm/i915/rps: Centralize computation of freq caps

Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
different generations with even more variations arriving in the future. In
order not to have to do identical computation for these caps in multiple
places, here we centralize the computation of these caps. This makes the
code cleaner and also more extensible for the future.

v2: Clarify that caps are in "hw units" in comments (Lucas De Marchi)
v3: Minor checkpatch fix
v4: s/intel_rps_get_freq_caps/gen6_rps_get_freq_caps/ (Badal Nilawar)
v5: Changes comments to kernel doc (Anshuman Gupta)

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406191848.20895-1-ashutosh.dixit@intel.com

show more ...


Revision tags: v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26
# 01fabda8 25-Feb-2022 Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: Use str_yes_no()

Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel

drm/i915: Use str_yes_no()

Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com

show more ...


Revision tags: v5.15.25
# 1b279f6a 16-Feb-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Correct the param count for unset param

SLPC unset param H2G only needs one parameter - the id of the
param.

Fixes: 025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency lim

drm/i915/guc/slpc: Correct the param count for unset param

SLPC unset param H2G only needs one parameter - the id of the
param.

Fixes: 025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency limits")

Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com
(cherry picked from commit 9648f1c3739505557d94ff749a4f32192ea81fe3)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...


# 0591ee6a 17-Feb-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Use wrapper for reading RP_STATE_CAP

This will ensure correct values for Gen12+ platforms.

v2: Rebase

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew

drm/i915/guc/slpc: Use wrapper for reading RP_STATE_CAP

This will ensure correct values for Gen12+ platforms.

v2: Rebase

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com

show more ...


# 9648f1c3 16-Feb-2022 Vinay Belgaumkar <vinay.belgaumkar@intel.com>

drm/i915/guc/slpc: Correct the param count for unset param

SLPC unset param H2G only needs one parameter - the id of the
param.

Fixes: 025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency lim

drm/i915/guc/slpc: Correct the param count for unset param

SLPC unset param H2G only needs one parameter - the id of the
param.

Fixes: 025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency limits")

Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com

show more ...


Revision tags: v5.15.24
# e30e6c7b 15-Feb-2022 Matt Roper <matthew.d.roper@intel.com>

drm/i915: Move MCHBAR registers to their own header

Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.

Fo

drm/i915: Move MCHBAR registers to their own header

Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.

For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):

* Pre-gen6: 0x10000
* Gen6-Gen11 + RKL: 0x140000

v2:
- Create separate patch to swtich a few register definitions to be
relative to the MCHBAR mirror base.
- Drop upper bound of MCHBAR mirror from commit message; there are too
many different combinations between various platforms to list out,
and the documentation is spotty for the older pre-gen6 platforms
anyway.

Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com

show more ...


Revision tags: v5.15.23
# 5f2ec909 10-Feb-2022 Jani Nikula <jani.nikula@intel.com>

drm/i915: don't include drm_cache.h in i915_drv.h

Include it only in files that use it.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by:

drm/i915: don't include drm_cache.h in i915_drv.h

Include it only in files that use it.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14edab4a193ea3f73f387a88e3836c8555401871.1644507885.git.jani.nikula@intel.com

show more ...


Revision tags: v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18
# ce2fce25 27-Jan-2022 Matt Roper <matthew.d.roper@intel.com>

drm/i915: Only include i915_reg.h from .c files

Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much

drm/i915: Only include i915_reg.h from .c files

Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.

We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.

There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com

show more ...


# 0d6419e9 27-Jan-2022 Matt Roper <matthew.d.roper@intel.com>

drm/i915: Move GT registers to their own header file

This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consis

drm/i915: Move GT registers to their own header file

This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.

v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com

show more ...


Revision tags: v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9
# c14adcbd 14-Dec-2021 Michał Winiarski <michal.winiarski@intel.com>

drm/i915/gt: Use to_gt() helper

Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.

Signed-off-by: Michał Winiarski <michal.winia

drm/i915/gt: Use to_gt() helper

Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-5-andi.shyti@linux.intel.com

show more ...


12